Publications associées à Working fluid

The thermodynamic and life-cycle assessments of a novel charging station for electric vehicles in dynamic and steady-state conditions

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

The current study performs the thermodynamic and life-cycle assessments (LCA) of a novel charging station in two system designs. The goal is to design an efficient charging station for electric vehicles with high efficiencies and low environmental impacts ...

Nature Portfolio2023

Flow Boiling of Carbon Dioxide at Different Channel Orientations for the Thermal Management of Future Detector Technologies at the High-Luminosity Large Hadron Collider at CERN

David Schmid

The global warming potential (GWP) of working fluids in thermodynamic cycles and their environmental impact have been gaining considerable attention within the recent years. The global objectives on climate protection are becoming increasingly ambitious, w ...

EPFL2022

A parametric study on pool boiling heat transfer and critical heat flux on structured surfaces with artificial cavities

Luis Guillermo Villanueva Torrijo, Ahmad Reza Motezakker

Emerging applications in new generation electronic devices require effective heat removal and thermal man-agement. In this regard, boiling is a phase change phenomenon capable of dissipating a large amount of heat compared to the sensible heat. In this stu ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Organic Rankine Cycle as the Waste Heat Recovery Unit of Solid Oxide Fuel Cell: A Novel System Design for the Electric Vehicle Charging Stations Using Batteries as a Backup/Storage Unit

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

The novelty of this study is to suggest a novel design for electric vehicle charging stations using fuel cell technology. The proposed system benefits from the Organic Rankine Cycle (ORC) to utilize the exhaust energy of the Solid Oxide Fuel Cell (SOFC) st ...

MDPI2022

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Thermal management of components for high energy physics experiments and space applications

Timothée Robert Sophus Frei

High-energy physics (HEP) experiments and space missions share a common challenge: thermal management in harsh environments. The severe constraints in both fields make cooling of electronic components a major design concern. This thesis aims to develop hig ...

EPFL2021

Operational Map And Thermal Performance Of A Thermosyphon Cooling System For Compact Servers

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

This paper advances the state-of-the-art in novel passive two-phase systems for more efficient cooling of datacenters and telecom central offices compared to the traditional air-based cooling solutions (e.g. aisle-based containment systems). The proposed p ...

AMER SOC MECHANICAL ENGINEERS2021

Compact Thermosyphon Cooling System For High Heat Flux Servers: Validation Of Thermosyphon Simulation Code Considering New Test Data

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

Passive, gravity-driven thermosyphons represent a stepchange in technology towards the goal of greatly reducing PUE (Power Usage Effectiveness) of datacenters by replacing energy hungry fans of air-cooling approach with a highly-reliable solution able to d ...

AMER SOC MECHANICAL ENGINEERS2021

Experimental Investigation of a Small-Scale Organic Rankine Cycle Turbo-Generator Supported on Gas-Lubricated Bearings

Jürg Alexander Schiffmann, Kévin Rosset

Waste heat recovery (WHR) is expected to contribute to reducing CO2 emissions from trucks. Organic Rankine cycle (ORC) systems show the highest potential for this application, but still lack efficient small-scale expansion devices, in practice. A novel tur ...

2021

Electrochemical reactor

Sophia Haussener, Fredy Intelligent Nandjou Dongmeza

The present relates to an internally cooled and humidified electrochemical reactor comprising at least one open-pore cellular plate, which is made of a conductive open-cell material adapted to permit direct circulation of gas and liquid through it in a str ...

2020

Scale limitations of gas bearing supported turbocompressors for vapor compression cycles

Jürg Alexander Schiffmann

An analysis of single-stage centrifugal compressors supported on dynamic, gas lubricated bearings for driving vapor compression cycles suggests that the maximum feasible compressor power is limited, primarily by the bearing load capacity, in the range from ...

2020

Autonomous oil flow generated by self-oscillating polymer gels

Vito Cacucciolo

The previously reported gel and polymer actuators require external inputs, such as batteries, circuits, electronic circuits, etc., compared with autonomous motions produced by the living organisms. To realize the spontaneous motions, here, we propose to in ...

Nature Research2020

System for co2 capture from internal combustion engine

François Maréchal, Shivom Sharma

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

2020

Numerical Simulations of Pulsating Heat Pipes, Part 2: Comparison to Experimental Data

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo, Raffaele Luca Amalfi

Due to the local pulsating/transient nature and complex thermal-hydraulic coupling of a closed loop pulsating heat pipe (CLPHP), there is a need to develop an effective simulation code capable to design and predict the local and overall thermal performance ...

IEEE2019

Experimental Performance of Completely Passive Single and Recirculating Loop Thermosyphon Cooling Systems using Low GWP R1234ze and R1234yf

John Richard Thome

This paper proposes a novel concept for a loop thermosyphon cooling system, designed for the transistor module of a transformer. The thermosyphon uses a free convection cooled condenser, making the system completely passive, i.e. no energy consumption is n ...

IEEE2019

Experimental Characterization of Different Condenser Technologies in a Passive Two-Phase Cooling System for Thermal Management of Electronics

John Richard Thome, Jackson Braz Marcinichen, Chiara Falsetti, Raffaele Luca Amalfi

Passive two-phase, micro-channel cooling for thermal management of electronics represents an efficient and viable solution to augment conventional air-cooling systems with the potential for higher power dissipation densities, increased reliability, reduced ...

IEEE2019

Design and optimization of a high-temperature latent heat storage unit

Sophia Haussener, Ehsan Rezaei, Alberto Ortona, Maurizio Barbato

High-temperature latent heat thermal energy storage systems offer compact storage solutions, benefiting from the large latent heat of phase change materials. Common challenges in their design process are the low thermal conductivity of the phase change mat ...

2019

Differential Heating Drives Downslope Flows that Accelerate Mixed-LayerWarming in Ice-Covered Waters

Alfred Johny Wüest, Damien Bouffard, Hugo Nicolás Ulloa Sánchez, Kraig Bates Winters

In ice-covered lakes, penetrative radiation warms fluid beneath a diffusive boundary layer, thereby increasing its density and providing energy for convection in a diurnally active, deepening mixed layer. Shallow regions are differentially heated to warmer ...

2019

Engineered Lateral Roughness Element Implementation and Working Fluid Alteration to Intensify Hydrodynamic Cavitating Flows on a Chip for Energy Harvesting

Luis Guillermo Villanueva Torrijo, Morteza Ghorbani

Hydrodynamic cavitation is considered an effective tool to be used in different applications, such as surface cleaning, ones in the food industry, energy harvesting, water treatment, biomedical applications, and heat transfer enhancement. Thus, both charac ...

2019

Small, High-Speed, Oil-Free Radial Turbo-compressors for Cooling Applications: Refrigerant Selection

Jürg Alexander Schiffmann

Emerging energy-efficient, oil-free radial centrifugal compressors seem promising for small to mid-capacity air conditioning and refrigeration applications. Compressor design must balance trade-offs among impeller diameter, bearing type, and refrigerant se ...

2018