Publications associées à Critère de plasticité

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

Roland Logé, Christian Leinenbach, Markus Strobl, Efthymios Polatidis

Laser-powder bed fusion (L-PBF) has gained significant research interest, not only for its profound advantage of producing near-net shape complex geometries of metallic parts, but also for the possibility of producing tailored microstructures. Here we expl ...

ELSEVIER SCI LTD2022

Biaxial flexural response of Strain-Hardening UHPFRC circular slab elements

Eugen Brühwiler, Xiujiang Shen, Wanghu Peng

The biaxial flexural response of strain-hardening UHPFRC circular slab element is investigated experimentally and analytically using the ring-on-ring test. The Digital Image Correlation (DIC) technology is applied to capture the 3D full-field of strain and ...

ELSEVIER SCI LTD2020

Yielding of a quartz sand from saturated to dry state

Alessio Ferrari

The paper presents the results of an experimental work where we analyse the behaviour of an unsaturated quartz sand in a wide range of degree of saturation (from saturated to dry state). The possibility of anticipating the hydro-mechanical behaviour of the ...

E D P SCIENCES2020

Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements

Xiujiang Shen

Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...

EPFL2020

Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches

Martin Antonio René Garcia

The objective of this thesis is to improve methods for predicting the fatigue life, multiaxial or not, of mild- and more particularly high-strength steels using local approaches that have the capacity to be applicable to almost any cases, hence the term ge ...

EPFL2020

Thermal Activation, Intermittency and Size Effects in the Plastic Deformation of Cast Aluminium Microwires

Suzanne Godelieve Alphonsine Verheyden

The microcasting process is a scaled-down investment casting process in which molten metal is pressure-infiltrated and directionally solidified in water-soluble moulds. It was previously developed to produce metallic microwires with a diameter (D) between ...

EPFL2018

Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy

William Curtin, Céline Varvenne, Joël Bonneville

To reveal the operating mechanisms of plastic deformation in an FCC high-entropy alloy, the activation volumes in CrMnFeCoNi have been measured as a function of plastic strain and temperature between 77 K and 423 K using repeated load relaxation experiment ...

2018

Flexural quasi-static behaviour of UHPFRC and R-UHPFRC circular slab specimens

Eugen Brühwiler, Xiujiang Shen

This paper investigates experimentally and numerically the biaxial flexural behaviour of thin circular slab specimens made of Ultra High Performance Fibre Reinforced Cementitious Composite (UHPFRC). The circular slab specimens represent an external tensile ...

RILEM publications S.A.R.L.2017

Deformation behavior of nanoporous polycrystalline silver. Part I: Microstructure and mechanical properties

Helena Van Swygenhoven, Steven Van Petegem

This work reports on the microstructure and mechanical properties of porous silver films produced with different sintering parameters. The microstructure is investigated by high-resolution ptychographic Xray computed tomography and scanning electron micros ...

Pergamon-Elsevier Science Ltd2017

Scaling laws for the mechanics of loose and cohesive granular materials based on Baxter's sticky hard spheres

Johan Alexandre Philippe Gaume, Henning Löwe

We have conducted discrete element simulations (PFC3D) of very loose, cohesive, granular assemblies with initial configurations which are drawn from Baxter's sticky hard sphere (SHS) ensemble. The SHS model is employed as a promising auxiliary means to ind ...

2017

Stokes' third problem for Herschel-Bulkley fluids

Christophe Ancey, Belinda Margaret Bates

Herschel-Bulkley materials can be set in motion when a sufficiently high shear stress or body force is applied to them. We investigate the behaviour of a layer of Herschel-Bulkley fluid when it is suddenly tilted and subject to gravitational forces. The ma ...

Elsevier2017

Theory of strengthening in fcc high entropy alloys

William Curtin, Céline Varvenne

High Entropy Alloys (HEAs) are a new class of random alloys having impressive strength and toughness. Here, a mechanistic, parameter-free, and predictive theory for the temperature-, composition-, and strain-rate-dependence of the plastic yield strength of ...

Pergamon-Elsevier Science Ltd2016

Measuring the accuracy of softball impact simulations

Pascal Fua

A study has been conducted to review viscoelastic and foam-constitutive models to describe sport ball response to impact with a rigid cylindrical surface. The impact model was developed to simulate a ball-bat collision. Comparisons were made to actual impa ...

Springer London Ltd2016

Negative-pressure-induced enhancement in a freestanding ferroelectric

Nava Setter, Alexander Tagantsev, Marco Cantoni, Tomas Sluka, Alexander Kvasov, Silviu Cosmin Sandu, Jin Wang, Xiankui Wei, Brahim Dkhil

Ferroelectrics are widespread in technology(1), being used in electronics and communications(2), medical diagnostics and industrial automation. However, extension of their operational temperature range and useful properties is desired(3-5). Recent developm ...

Nature Publishing Group2015

Prediction of quenching-induced stress distribution in 7XXX aluminium alloy thick plates using Gleeble interrupted quench tests

Jean-Marie Drezet, Nicolas Paul Henry Chobaut, Patrick Schloth, Denis Carron

In the fabrication of heat treatable aluminum parts for the aeronautic industry, quenching is a key step to obtain the required mechanical characteristics after aging. For thick plates, thermal gradients cause non-homogeneous plastic strain resulting in re ...

Matthias Militzer, Gianluigi Botton, Long-Qing Chen, James Howe, Chadwick Sinclair, and Hatem Zurob2015

Multi-Scale Approach to Cracking Criteria for Drying Silty Soils

Lyesse Laloui, Mohammad Monfared

Cracking is a most unwanted development in soil structures undergoing periodic drying. Desiccation cracking arises in the apparent absence of external forces. Hence, either an internal, self equilibrated stress pattern resulting from kinematic incompatibil ...

American Society of Civil Engineers2013

Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder

John Botsis, Joël Cugnoni, Milad Maleki

The eutectic micro-constituent in SnAgCu solder governs the deformation behavior of the joint as it shows better deformation resistance than the Sn dendrites and occupies a high volume percentage of the whole solder. The main scope of this study is to deve ...

Elsevier2013

Deformation and Damage in Lead-free Solder Joints : Microstructure-based Modeling and Experimental Characterization

Milad Maleki

For environmental reasons, lead has been banned from microelectronic solder materials since the adoption of the RoHS legislation in 2006. A large number of investigations have lead to the development of new lead-free solder materials like the SnAgCu alloy ...

EPFL2012

Development and application of damage spectra for RC buildings in Europe

Pierino Lestuzzi, Amin Karbassi

Damage spectra for existing reinforced concrete buildings in Europe are presented in this paper. To this end, a series of time-history nonlinear dynamic analyses for single-degree-of-freedom systems with different deformation ductility values and yielding ...

2012

Development and Application of Damage Spectra to Evaluate the Seismic Performance of Reinforced Concrete Buildings in Greece

Pierino Lestuzzi, Amin Karbassi

Damage spectra for reinforced concrete buildings in Greece are presented in this paper based on a series of time-history nonlinear dynamic analyses for single-degree-of-freedom systems (Clough hysteresis model) with different deformation ductility and yiel ...

2011