Publications associées à Pulse shaping

A Low-Complexity LoRa Synchronization Algorithm Robust to Sampling Time Offsets

Orion Afisiadis, Mathieu Pierre Xhonneux

LoRaWAN is nowadays one of the most popular protocols for low-power Internet of Things communications. Although its physical layer, namely LoRa, has been thoroughly studied in the literature, aspects related to the synchronization of LoRa receivers have re ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Spike-Based Sensing and Communication for Highly Energy-Efficient Sensor Edge Nodes

Mihai Adrian Ionescu, Teodor Rosca

Highly energy-efficient wireless sensor nodes are a prerequisite for a sustainable operation of the Internet of things. Therefore, classical approaches for system design based on digital signal processing are not a viable solution, but system design has to ...

IEEE2022

Versatile shaping of optical frequency combs and applications

Jianqi Hu

Optical frequency combs are a series of phase-locked and equidistant laser lines in the spectral domain. In the time domain, they correspond to periodic pulse trains by the Fourier relation. The ability to shape optical combs and pulse trains is pivotal to ...

EPFL2021

Energy-Efficient Design Techniques for High-Speed Wireline Serial Links

Firat Çelik

The exponential growth in computing power and multimedia services has caused a tremendous increase in data traffic in recent years. This increase in data traffic brings a strong demand for data bandwidth of electrical input/output (I/O) links and pushes th ...

EPFL2021

Distributed and dynamic strain sensing with high spatial resolution and large measurable strain range

Luc Thévenaz, Malak Mohamed Hossameldeen Omar Mohamed Galal, Zhisheng Yang, Li Zhang

A distributed and dynamic strain sensing system based on frequency-scanning phase-sensitive optical time domain reflectometry is proposed and demonstrated. By utilizing an RF pulse scheme with a fast arbitrary waveform generator, a train of optical pulses ...

2020

Demonstration of Tunable Optical Aggregation of QPSK to 16-QAM Over Optically Generated Nyquist Pulse Trains Using Nonlinear Wave Mixing and a Kerr Frequency Comb

Tobias Kippenberg, Maxim Karpov, Martin Hubert Peter Pfeiffer, Arne Kordts, Fatemeh Alishahi, Ahmad Fallahpour, Cong Liu

A tunable and reconfigurable optical aggregation system is experimentally demonstrated. Optical Nyquist pulses are generated on multiple channels using a microresonator-based Kerr optical frequency comb and insertion of uniform lines by an intensity modula ...

IEEE Institute of Electrical and Electronics Engineers2020

Improved off‐resonance phase behavior using a phase‐inverted adiabatic half‐passage pulse for 13 C MRS in humans at 7 T

Rolf Gruetter, Lijing Xin, Daniel Gallichan, Eulalia Serés Roig

In vivo (13) C MRS at high field benefits from an improved SNR and spectral resolution especially when using surface coils in combination with adiabatic pulses, such as the adiabatic half-passage (AHP) pulse for (13) C excitation. However, the excitation p ...

2019

V-band nanosecond-scale pulse reflectometer diagnostic in the TCV tokamak

Stefano Coda, Laurie Porte, Pedro Andres Molina Cabrera

This article describes the realization of a novel approach to short pulse (∼1 ns) reflectometry (SPR) recently implemented in the tokamak configuration variable tokamak. Taking advantage of a fast arbitrary waveform generator and vector-network-analyzer ex ...

2019

Tokamak plasma edge studies by microwave short-pulse reflectometry and backscattering

Pedro Andres Molina Cabrera

Moving towards an increased understanding of the dynamic processes in the edge of tokamak plasmas requires continuous innovation in diagnostic capabilities, pushing the envelope in both spatial and temporal dimenstions. Plasma density and rotation, and the ...

EPFL2019

Multi-Tone Signaling and ADC-Based Digital Receiver for High-Speed Wireline Serial Links

Gain Kim

The exponential growth of Internet traffic and related demands for higher communication speed pushes processor-to-processor and processor-to-memory interconnects to provide further higher data-rate. Often time, processor-to-memory interconnectsâ speed is ...

EPFL2018

A 60 Gb/s 1.9 pJ/bit NRZ Optical-Receiver with Low Latency Digital CDR in 14nm CMOS FinFET

Yusuf Leblebici, Alessandro Cevrero, Lukas Kull, Ilter Ozkaya, Thomas Toifl

This work reports a low power implementation of a 60Gb/s NRZ optical receiver (RX) in 14nm bulk CMOS finFET featuring a first-order digital CDR with high jitter tolerance (JTOL). The design includes a single phase-rotator (PR) with low complexity control l ...

2017

High-Speed Wireline Link Design

Hazar Yüksel

High-speed serial links are a crucial application of semiconductor technology and have been the enabler of the scaling of computing systems. The increasing data-rate requirements of these links have only been partially satisfied by advancements in process ...

EPFL2017

Optical Signal Processing and Pulse Shaping for Wavelength Multiplexed High Speed Communication Systems

Mohammad Amin Shoaie

The steady growth of capacity demand in telecommunication networks has sparked the development of various photonic devices for ultrafast optical signal processing functions to meet the requirements of future flexible fiber networks in general and backbone ...

EPFL2016

Versatile spectral modulation of a broadband source for digital holographic microscopy

Christophe Moser, Tristan Colomb, Gaël Nardin

We demonstrate the potential of spatial light modulators for the spectral control of a broadband source in digital holographic microscopy. Used in a ‘pulse-shaping’ geometry, the spatial light modulator provides a versatile control over the bandwidth and w ...

Optical Society of America2016

A Digital Spectrum Shaping Signaling Serial-Data Transceiver with Crosstalk and ISI Reduction Property in Multi-Drop Interfaces

Seyed Armin Tajalli, Yusuf Leblebici, Gain Kim, Kiarash Gharibdoust

A transceiver (TRX) architecture employing spectrum shaping signaling scheme is proposed, which can significantly reduce inter-symbol interference (ISI) and crosstalk in multi-drop interfaces. The proposed TRX architecture relies on digital implementation ...

Ieee-Inst Electrical Electronics Engineers Inc2016

System and method for producing optical sinc-shaped pulses

Luc Thévenaz, Camille Sophie Brès, Marcelo Alfonso Soto Hernandez, Mohammad Amin Shoaie, Mohammad Mehdi Alem Karladani

System and methods for producing a plurality of Sinc shaped pulses in the time domain include a light source for providing an input light signal having an input frequency, and at least one spectrum shaper for producing the plurality of Sinc shaped pulses f ...

United States Patent and Trademark Office2015

Differential chirped-pulse pair for sub-meter spatial resolution Brillouin distributed fiber sensing

Luc Thévenaz, Marcelo Alfonso Soto Hernandez, Zhisheng Yang

A distributed fiber sensor based on a differential chirped-pulse pair Brillouin optical time domain analysis (DCPBOTDA) is proposed for sub-meter spatial resolution sensing. The technique is based on the subtraction of two measurements made with the same p ...

SPIE2015

On lattice codes for Gaussian interference channels

Michael Christoph Gastpar, Jingge Zhu

The usefulness of lattice codes is investigated for two-user Gaussian interference channels (IC). A coding scheme based on the compute-and-forward technique is shown to achieve the capacity region of the Gaussian IC under strong interference. The proposed ...

2015

Broadband Uniform Wavelength Conversion and Time Compression of WDM Channels

Camille Sophie Brès, Mohammad Amin Shoaie

A scheme based on 2-pump OPA is proposed for uniform wavelength conversion and optimized compression. We show 4.7-fold compression over 32 nm range resulting in Gaussian pulses from sinusoidal modulation and enabling simultaneous compression of WDM channel ...

2015

Comparative analysis of digital pulse processing methods at high count rates

Stefano Coda, Philippe Marmillod, Silvano Gnesin, Josef Kamleitner

An extensive study of digital pulse processing methods is presented. Existing methods, both traditional and more recent, are compared with original advanced techniques within an appropriate modeling and benchmarking framework. This comprehensive approach e ...

Elsevier Science Bv2014