Publications associées à Edge-localized mode

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

IOP Publishing Ltd2024

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Benoît Labit, Alessandro Pau, Alexander Karpushov, Antoine Pierre Emmanuel Alexis Merle, Oleg Krutkin, Cassandre Ekta Contré, Reinart Andreas J. Coosemans, Yann Camenen, Olivier Claude Martin Février, Matteo Vallar, Filippo Bagnato, Simon Van Mulders, Stefano Marchioni

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

2024

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Olivier Sauter, Gabriele Merlo, Alberto Mariani

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

IOP Publishing Ltd2024

Disruption avoidance and investigation of the H-Mode density limit in ASDEX Upgrade

Alessandro Pau, Federico Alberto Alfredo Felici, Bernhard Sieglin

In recent years a strong effort has been made to investigate disruption avoidance schemes in order to aid the development of integrated operational scenarios for ITER. Within the EUROfusion programme the disruptive H-mode density limit (HDL) has been studi ...

Iop Publishing Ltd2024

Reducing transport via extreme flux-surface triangularity

Stefano Coda, Justin Richard Ball

Based on a gyrokinetic analysis of and extrapolation from TCV discharges with large negative and positive triangularity delta, the potential of extreme | delta | in reducing turbulent transport is assessed. Linearly, both positive and negative delta can ex ...

IOP Publishing Ltd2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

Olivier Sauter, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré, Anna Teplukhina, Bernhard Sieglin

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

Iop Publishing Ltd2024

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Olivier Sauter, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré, Hartmut Zohm

Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusi ...

IOP Publishing Ltd2024

Benign termination of runaway electron beams on ASDEX Upgrade and TCV

Basil Duval, Stefano Coda, Joan Decker, Umar Sheikh, Luke Simons, Claudia Colandrea, Jean Arthur Cazabonne, Bernhard Sieglin, Gergely Papp

This paper discusses the development of a benign termination scenario for runaway electron (RE) beams on ASDEX Upgrade and TCV. A systematic study revealed that a low electron density (n e) companion plasma was required to achieve a large MHD instability, ...

Iop Publishing Ltd2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR. Part B: safe termination of DEMO plasmas

Olivier Sauter, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré, Emiliano Fable, Anna Teplukhina

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to ...

Iop Publishing Ltd2024

NBI optimization on SMART and implications for scenario development

Mario Ludovico Podesta, Francesca Maria Poli

The SMall Aspect Ratio Tokamak (SMART) under commissioning at the University of Seville, Spain, aims to explore confinement properties and possible advantages in confinement for compact/spherical tokamaks operating at negative vs. positive triangularity. T ...

Iop Publishing Ltd2024

Re-design of EU DEMO with a low aspect ratio

Hartmut Zohm

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

2024

Nonlinear saturation of resistive tearing modes in a cylindrical tokamak with and without solving the dynamics

Joaquim Loizu Cisquella

We show that the saturation of resistive tearing modes in a cylindrical tokamak, as well as the corresponding island width, can be directly calculated with a magnetohydrodynamics (MHD) equilibrium code without solving the dynamics and without considering r ...

Cambridge University Press2023

Maximum likelihood bolometry for ASDEX upgrade experiments

Olivier Claude Martin Février, Riccardo Rossi

Bolometry is an essential diagnostic for calculating the power balances and for the understanding of different physical aspects of tokamak experiments. The reconstruction method based on the Maximum Likelihood (ML) principle, developed initially for JET, h ...

Iop Publishing Ltd2023

Studies on EU-DEMO 3D coils requirements and conceptual design for error field correction and plasma control

Pierluigi Bruzzone, Hartmut Zohm, Leonardo Pigatto

This work presents the initial studies on the requirements for the design of 3D coils on EU-DEMO. The use of 3D coils in present machines includes two main purposes: the first one is the Error Field Correction (EFC). The EFC aims at minimizing the intrinsi ...

Elsevier Science Sa2023

Plasma turbulence simulations in a diverted tokamak with applied resonant magnetic perturbations

Paolo Ricci, Joaquim Loizu Cisquella, Théophile Boinnard, António João Caeiro Heitor Coelho

The first results of three-dimensional, flux-driven, electrostatic, global, two-fluid turbulence simulations of a diverted tokamak configuration with applied resonant magnetic perturbations generated by a set of saddle coils are presented. The simulations ...

IOP Publishing Ltd2023

On the relationship between the multi-region relaxed variational principle and resistive inner-layer theory

Joaquim Loizu Cisquella, Ankit Kumar

We show that the variational energy principle of the multi-region relaxed magnetohydrodynamic (MRxMHD) model can be used to predict finite-pressure linear tearing instabilities. In this model, the plasma volume is sliced into sub-volumes separated by 'idea ...

2023

Characterisation of electron cyclotron wall conditioning plasma in ASDEX Upgrade

Richard Pitts

Electron cyclotron wall condition (ECWC) discharges are characterised in ASDEX Upgrade with full tungsten plasma facing components and X2 polarised waves launched from the equatorial ports, relevant to ECWC conditions in ITER Pre-Fusion Power Operation pha ...

IOP Publishing Ltd2023

The X-Point radiating regime at ASDEX Upgrade and TCV

Holger Reimerdes, Christian Gabriel Theiler, Marco Wischmeier, Umar Sheikh, Artur Perek, Bernhard Sieglin

Future fusion reactors require a safe, steady-state divertor operation. With deep divertor detachment, which is typically induced by impurity seeding, the radiation concentrates in a small region at the X-point or on closed flux surfaces above the X-point. ...

Elsevier2023

Model-based electron density estimation using multiple diagnostics on TCV

Olivier Sauter, Federico Alberto Alfredo Felici, Cristian Galperti

Estimation of the dynamic evolution of the electron plasma density during a tokamak discharge is crucial since it directly affects the plasma performance, confinement and stability. Therefore it needs to be monitored and controlled. Knowledge of the densit ...

ELSEVIER SCIENCE SA2023

Model-based impurity emission front control using deuterium fueling and nitrogen seeding in TCV

Basil Duval, Christian Gabriel Theiler, Cristian Galperti, Artur Perek

This paper presents the first result using nitrogen-seeded exhaust feedback control of the NII impurity emission front in TCV. The NII emission front position is consistently located below its commonly used CIII counterpart, indicating the NII emission fro ...

IOP Publishing Ltd2023