Publications associées à Goniomètre

A cut-cell method for the numerical simulation of 3D multiphase flows with strong interfacial effects

Marco Picasso, Alexandre Caboussat, Julien Hess, Alexandre Masserey

We present a numerical model for the approximation of multiphase flows with free surfaces and strong interfacial effects. The model relies on the multiphase incompressible Navier-Stokes equations, and includes surface tension effects on the interfaces betw ...

Academic Press Inc Elsevier Science2024

Measuring electro-adhesion pressure before and after contact

Herbert Shea, Sylvain Thomas Schaller

Electro-adhesion (EA) is a low-power, tunable, fast and reversible electrically-controlled adhesion method, effective on both conducting and insulating objects. Typically, only the electro-adhesive detachment force, i.e., the force required to separate an ...

Nature Portfolio2023

Molecular simulations of interfacial systems: challenges, applications and future perspectives

Athanasios Nenes, Satoshi Takahama, Mária Lbadaoui-Darvas

We present a comprehensive review of methods and applications of molecular simulations of interfacial systems. We give a detailed overview of the main techniques and major challenges in the following aspects of solid and fluid surfaces: adsorption at solid ...

TAYLOR & FRANCIS LTD2023

Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments

Ludger Weber, Alberto Ortona, Manoj Kondibhau Naikade

The contact angles of two different systems, molten silicon and a eutectic Si-8 at. pct Zr alloy and their evolution over timeon vitreous carbon and polycrystalline silicon carbide (SiC) substrates were investigated at 1500 degrees C under vacuum, as well ...

ELSEVIER SCI LTD2019

Theoretical framework to analyze the combined effect of surface tension and viscosity on the damping rate of sloshing waves

François Gallaire, Francesco Viola

Gravity force, surface tension, oscillating boundary layers, viscous dissipation, static meniscus, contact angle hysteresis, and moving contact lines are typical features of sloshing dynamics. All these ingredients influence capillary-gravity waves in a co ...

AMER PHYSICAL SOC2018

Ultralow Interfacial Tension Measurement through Jetting/Dripping Transition

François Gallaire, Laura Augello

In this paper, we present a dynamic microfluidic tensiometer able to perform measurements over more than four decades and which is suitable for high throughput experimentations. This tensiometer is able to withstand hard conditions such as high pressure, h ...

American Chemical Society2017

Study of synergetic effect, catalytic poisoning and regeneration using dielectric barrier discharge and photocatalysis in a continuous reactor: Abatement of pollutants in air mixture system

Sami Rtimi

In the present work the abatement of butyraldehyde (BUTY), dimethyl disulfide (DMDS) and their mixtures in gas phase was studied in continuous reactor at three different configurations: photocatalysis (TiO2 + UV), dielectric barrier discharge (DBD) plasma ...

Elsevier Science Bv2017

Grafted semiconductors on PE-films leading to bacterial inactivation: Synthesis, characterization and mechanism

César Pulgarin, Juan Kiwi, Sami Rtimi

This study reports the colloidal preparation FeOx, TiO2 and FeOx-TiO2 grafted on polyethylene (PE) films leading to bacterial inactivation. A fast bacterial inactivation was attained by the FeOx-TiO2 compared to the FeOx-PE film due to the interfacial char ...

Elsevier2017

Scaling laws for the mechanics of loose and cohesive granular materials based on Baxter's sticky hard spheres

Johan Alexandre Philippe Gaume, Henning Löwe

We have conducted discrete element simulations (PFC3D) of very loose, cohesive, granular assemblies with initial configurations which are drawn from Baxter's sticky hard sphere (SHS) ensemble. The SHS model is employed as a promising auxiliary means to ind ...

2017

The effect of mesoporous TiO2 pore size on the performance of solid-state dye sensitized solar cells based on photoelectrochemically polymerized Poly(3,4-ethylenedioxythiophene) hole conductor

Nikolaos Vlachopoulos, Ulf Anders Hagfeldt, Jiahuan Zhang

Photoelectrochemical polymerization of poly(3,4-ethylenedioxythiphene) (PEDOT) has recently been introduced and widely investigated for fabrication of the hole transporting material (HTM) in highly efficient solid state dye sensitized solar cells (sDSCs). ...

Pergamon-Elsevier Science Ltd2016

Investigating The Size-Dependent Static And Dynamic Behavior Of Circular Micro-Plates Subjected To Capillary Force

Simon Nessim Henein, Ilan Vardi, Mohammad Hussein Kahrobaiyan

The size-dependent static deflection, pull-in instability and resonant frequency of a circular microplate under capillary force have been studied using modified couple stress elasticity theory. SiZe-dependency is a phenomenon in which the normalized quanti ...

Amer Soc Mechanical Engineers2016

Contact angle and adsorption energies of nanoparticles at the air-liquid interface determined by neutron reflectivity and molecular dynamics

Francesco Stellacci, Javier Reguera Gomez, Mauro Moglianetti, Evgeniy Ponomarev

Understanding how nanomaterials interact with interfaces is essential to control their self-assembly as well as their optical, electronic, and catalytic properties. We present here an experimental approach based on neutron reflectivity (NR) that allows the ...

Royal Society of Chemistry2015

Influence of the wetting angle on capillary forces in pressure infiltration

Andreas Mortensen, Ludger Weber, Alain Léger

This work probes the influence of wetting on pressure infiltration. Pressure/saturation curves for the infiltration of packed F1000 angular alumina particle preforms by liquid Cu-Al and Sn-Al alloys are measured using an instrumented high-temperature press ...

Elsevier2015

Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves

Andreas Mortensen, Ludger Weber, Alain Léger

The wetting of angular alumina particle preforms by Cu-Sn alloys is investigated by means of pressure infiltration experiments conducted at 1150 A degrees C, using a system enabling dynamic and precise measurements of the metal volume injected into the pre ...

Springer Verlag2014

How the global layout of the mask influences masking strength

Michael Herzog

In visual backward masking, the perception of a target is influenced by a trailing mask. Masking is usually explained by local interactions between the target and the mask representations. However, recently it has been shown that the global spatial layout ...

Association for Research in Vision and Ophthalmology2012

New/Surface-Modified Biocompatible Polymer for ICD Lead Insulation

Rubin Berek Pisarek

The average lifetime of an implanted pacemaker or defibrillator cable (lead) is approximately 10 years. One of the main lead failure mechanisms is deterioration of the insulation, which can be caused by chemical, biological, and mechanical processes. Each ...

EPFL2011

Comparing the enhanced sensing interfaces of differently oriented carbon nanotubes onto silicon for bio-chip applications

Giovanni De Micheli, Sandro Carrara, Irene Taurino

Carbon nanotubes improve the sensitivity of electrochemical biochips. An optimized integration of the nano/bio/CMOS interface is required to realize accurate and low-cost sensors for applications in personalized medicine. The nanotubes orientation on the c ...

2011

An Improved CFD Tool to Simulate Adiabatic and Diabatic Two-Phase Flows

Bogdan Alexandru Nichita

With increasing computer capabilities, numerical modeling of two-phase flows has developed significantly over the last few years. Although there are two main categories, namely 'one' fluid and 'two' fluid methods, the 'one' fluid methods are more commonly ...

EPFL2010

Low-Bond Axisymmetric Drop Shape Analysis for Surface Tension and Contact Angle Measurements of Sessile Drops

Michaël Unser, Daniel Sage, Thierry Blu, Michael Müller

A new method based on the Young-Laplace equation for measuring contact angles and surface tensions is presented. In this approach, a first-order perturbation technique helps to analytically solve the Young-Laplace equation according to photographic images ...

Elsevier2010

Instrument-independent specification of the diffraction geometry and polarization state of the incident X-ray beam

This work augments the proposal of Schwarzenbach & Flack [J. Appl. Cryst. (1989), 22, 601-605], who have advocated the use of a diffractometer-independent definition of the azimuthal angle

\psi

to specify the diffractiongeometry of a Bragg reflection. It ...

2009