Publications associées à Convertisseur numérique-analogique

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Kyojin Choo, Li Xu, Yimai Peng

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Phase Shift Angle Segmentation Modulation for Soft-Switching Medium-Voltage DAB Converter With Series-Connected SiC MOSFETs

Chengmin Li, Rui Lu, Heng Fang

The medium-voltage (MV) dual active bridge (DAB) converter with series-connected SiC (S-SiC) MOSFETs is a promising solution for high-power-density isolated dc/dc converter. To improve the voltage sharing and reliability of S-SiC, relatively large snubber ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Architecture for integrated RF photonic downconversion of electronic signals

Tobias Kippenberg, Junqiu Liu

Electronic analog to digital converters (ADCs) are run-ning up against the well-known bit depth versus bandwidth trade off. Towards this end, radio frequency (RF) photonic-enhanced ADCs have been the subject of interest for some time. Optical frequency com ...

Optica Publishing Group2023

Imaging system with silicon photomultipliers and method for operating thereof

Edoardo Charbon, Andrada Alexandra Muntean

The invention relates to an integrated imaging system comprising: - an array of analog photomultiplier elements - a plurality of submodules, each submodule having a number of the photomultiplier elements; - a plurality of time-to-digital converters each as ...

2023

Digital One-Shot Charge-balancing Method for Implantable Current-Mode Electrical Stimulation

Alexandre Schmid, Keyvan Farhang Razi

A low-power digital charge balancing system, which ensures the safe operation of constant-current biphasic stimulation is presented. The concept of the proposed charge-balancing technique is to utilize a hybrid method consisting of anodic pulse modulation ...

IEEE2023

Cascaded all-optical quantization employing step-size MMI and shape-optimized power splitter

Jijun He, Xiaowei Zhang, Jian Wu, Ye Tian

As a key unit of future high-throughput communications, optical analog to digital converter (OADC) with all-optical quantizer element that simultaneously possesses high resolution, large bandwidth and compact size is highly promising. A pending issue of co ...

ELSEVIER SCI LTD2023

An Error-Based Approximation Sensing Circuit for Event-Triggered Low-Power Wearable Sensors

David Atienza Alonso, Alexandre Sébastien Julien Levisse, Tomas Teijeiro Campo, Silvio Zanoli, Flavio Ponzina

Event-based sensors have the potential to optimize energy consumption at every stage in the signal processing pipeline, including data acquisition, transmission, processing, and storage. However, almost all state-of-the-art systems are still built upon th ...

2023

RDS: FPGA Routing Delay Sensors for Effective Remote Power Analysis Attacks

Mirjana Stojilovic, Ognjen Glamocanin, David Spielmann

State-of-the-art sensors for measuring FPGA voltage fluctuations are time-to-digital converters (TDCs). They allow detecting voltage fluctuations in the order of a few nanoseconds. The key building component of a TDC is a delay line, typically implemented ...

2023

Observation of non-reciprocal harmonic conversion in real sounds

Romain Christophe Rémy Fleury, Hervé Lissek, Xinxin Guo

Reciprocity guarantees that in most media, sound transmission is symmetric between two points of space when the location of the source and receiver are interchanged. This fundamental law can be broken in non-linear media, often at the cost of detrimental i ...

2023

Federated Linear Bandit Learning via Over-the-air Computation

Yuning Jiang, Xin Liu, Ting Wang

In this paper, we investigate federated contextual linear bandit learning within a wireless system that comprises a server and multiple devices. Each device interacts with the environment, selects an action based on the received reward, and sends model upd ...

IEEE2023

Comparison of Two in Pixel Source Follower Schemes for Deep Subelectron Noise CMOS Image Sensors

Christian Enz, Assim Boukhayma, Antonino Caizzone, Andrea Kraxner, Minhao Yang, Daniel Mathias Bold

This paper compares two in-pixel source follower stage designs for low noise CMOS image sensors embedded both on a same 5 mm by 5 mm chip fabricated in a 180 nm CIS process. The presented chip embeds two pixel variants, one based on a body-effect-canceled ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

An All-Digital 1.25 Mbps 5-Subcarrier OFDM Backscatter Uplink with Delta-Sigma Modulation for Improved Spurious-Free Dynamic Range

James Daniel Rosenthal

This paper describes an all-digital backscatter modulation approach leveraging delta-sigma modulation (DSM) to improve the in-channel spectral characteristics of orthogonal frequency division multiplexed (OFDM) backscatter communication. We demonstrate thr ...

IEEE2022

SEKV-E: Parameter Extractor of Simplified EKV I-V Model for Low-Power Analog Circuits

Christian Enz, Hung-Chi Han, Antonio D'Amico

This paper presents the open-source Python-based parameter extractor (SEKV-E) for the simplified EKV (sEKV) model, which enables the modern low-power circuit designs with the inversion coefficient design methodology. The tool extracts the essential sEKV pa ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A Delta Sigma-Modulated Sample and Average Common-Mode Feedback Technique for Capacitively Coupled Amplifiers in a 192-nW Acoustic Analog Front-End

Kyojin Choo

This work presents an acoustic analog front-end based on a delta sigma-modulated sample and average common-mode feedback technique. The proposed feedback offers a process and temperature stable high pass (HP) frequency corner, unity dc feedback gain, and a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli, Franco Maloberti

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Spike-Based Sensing and Communication for Highly Energy-Efficient Sensor Edge Nodes

Mihai Adrian Ionescu, Teodor Rosca

Highly energy-efficient wireless sensor nodes are a prerequisite for a sustainable operation of the Internet of things. Therefore, classical approaches for system design based on digital signal processing are not a viable solution, but system design has to ...

IEEE2022

Performance Analysis of Energy Balancing Methods for Matrix Modular Multilevel Converters

Drazen Dujic, Stefan Milovanovic, Philippe Alexandre Bontemps

Modular multilevel converters achieve voltage scalability through the series connection of cells, each with its own capacitance. However, this converter structure using floating energy storage elements increases the control complexity significantly. The vo ...

2022

Inductive Power Transfer System for Auxiliary Power Supply in Medium Voltage Converters

Drazen Dujic, Chengmin Li, Xiaotong Du

Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...

2022

Multipolar Modeling of Spatially Dispersive Metasurfaces

Olivier Martin, Karim Achouri, Ville Tuovi Tiukuvaara

There is today a growing need to accurately model the angular scattering response of metasurfaces for optical analog processing applications. However, the current metasurface modeling techniques are not well suited for such a task since they are limited to ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022