Recherche

Afficher tous les résultats pour

Accueil

Personne

Alessio Ferrari

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (174)

Pore-pressure coefficients for unsaturated soils: Generalised effective stress approach

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

2023

Hydro-mechanichal characterisation of bentonite/steel interfaces

Alessio Ferrari, Eleni Stavropoulou, Fabiana Sannasardo

The hydromechanical response of a Wyoming-type bentonite (MX-80) and its interface with steel was studied in terms of shear resistance under different hydration levels. A series of shear tests under constant normal stress were performed in total suction co ...

2023

Thermo-hydro-mechanical analysis of the complete lifetime of the bentonite barrier in the FEBEX in-situ test

Lyesse Laloui, Alessio Ferrari, Yafei Qiao, Jose Antonio Bosch Llufriu

The FEBEX test was a large-scale demonstration project for the deep geological disposal concept of nuclear waste involving bentonite seals that lasted 18 years. One of the objectives of the test was to evaluate the capabilities of numerical methods to prov ...

2023

Modelling the density homogenisation of a block and granular bentonite buffer upon non-isothermal saturation

Lyesse Laloui, Alessio Ferrari, Jose Antonio Bosch Llufriu

2023

Discussion on "Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of Rock Fabric" of Schuster, V., Rybacki, E., Bonnelye, A., Herrmann, J., Schleicher, AM, Dresen, G

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

The testing procedure and results on saturated samples of Opalinus Clay in the work of Schuster et al. (Rock Mech Rock Eng https://doi.org/10.1007/ s00603-021-02474-3, 2021) were conducted and presented using strain rates two to four orders of magnitudes h ...

2022

Life cycle environmental assessment of retaining walls in unsaturated soils

Alessio Ferrari, Gianluca Speranza

Retaining structures above groundwater level support soils that are usually in a state of partial saturation and subject to the actions of atmospheric agents. The current design approach considers the possible extremes of soil conditions - either totally d ...

ELSEVIER2022

Microstructural characterization of a 3D-printed soil

Alessio Ferrari

Transversal applications of 3D-printing (or Additive Manufacturing) have been recently implemented in the field of Geomechanics. In a 3D-printing process, the printed volume is obtained from successive layering of adjacent soil filaments. In this work, the ...

2022

Effective stress concept for mechanical modeling of clays under different environmental conditions

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

EDP Sciences2022

Role of Stress History on the Swelling-Shrinkage Behavior of Compacted Scaly Clay

Alessio Ferrari

Compacted scaly clays are complex geomaterials widely used for the realization of dam cores and waste dump liners. This research aims to investigate the swelling/shrinkage behavior of these geomaterials subjected in an oedometric cell to complex hydromecha ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Swelling and shrinkage of gas shales due to suction variations

Lyesse Laloui, Alessio Ferrari, Jinwoo Kim

2022

The impact of the compaction and mineralogical composition on the retention behaviour of Opalinus Clay

Lyesse Laloui, Alessio Ferrari, Qazim Llabjani

2022

Early-stage thermal performance design of thermo-active walls implemented in underground infrastructures

Lyesse Laloui, Alessio Ferrari, Jacopo Zannin

Energy geostructures (EGs) represent an innovative technology in the sustainable energy agenda and are useful for satisfying the energy needs of the built environment. They are usually involving geostructures such as piles, walls, tunnels, shafts, and sewe ...

ELSEVIER2022

Volume change response and fabric evolution of granular MX80 bentonite along different hydro-mechanical stress paths

Alessio Ferrari, Jose Antonio Bosch Llufriu, Patrycja Ewelina Baryla

Despite the increasing understanding of bentonite behaviour, there is still missing evidence on how different hydro-mechanical loadings, including sequences of hydration and compression, affect the fabric and the volume change behaviour of the material. It ...

Springer Nature2022

Coupled hydro-mechanical analysis of compacted bentonite behaviour during hydration

Lyesse Laloui, Alessio Ferrari, Jose Antonio Bosch Llufriu

This study analyses the response of compacted bentonites upon hydration based on a coupled hydro-mechanical elasto-plastic framework. As an alternative to multi-porosity interpretation, the framework was selected based on the experimental evidence of adsor ...

2021

Effect of the mineralogical composition on the elastoplastic hydromechanical response of Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the shale currently under investigation as the host formation for geological radioactive waste disposal in Switzerland. Its hydromechanical response has been widely studied, and the experimental results show a range of values whose dispers ...

2021

Experimental analysis of a thermoactive underground railway station

Lyesse Laloui, Azad Koliji, Tohid Kazerani, Alessio Ferrari, Jacopo Zannin

Little is known about the real energy potential of thermoactive underground infrastructures, such as railway stations, that can act as a heating/cooling provider for the built environment. This study presents the results of thermomechanical full-scale in s ...

2021

Benchmark study of undrained triaxial testing of Opalinus Clay shale: Results and implications for robust testing

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Triaxial testing of argillaceous rocks and shales is significantly more challenging than conventional rock mechanical testing. The challenges are mainly related to the very low permeability of these geomaterials, and their sensitivity to exposure of atmosp ...

ELSEVIER2021

Experimental assessment of the hydro-mechanical behaviour of a shale caprock during CO2 injection

Lyesse Laloui, Alessio Ferrari, Alberto Minardi, Taeheon Kim, Eleni Stavropoulou

The presented experimental study focuses on the hydro-mechanical characterisation of a shale caprock (Opalinus Clay) in contact with carbon dioxide. The objective of this paper, consists in the evaluation of the material's sealing capacity in terms of entr ...

2021

Hydrothermal interactions in energy walls

Lyesse Laloui, Alessio Ferrari, Jacopo Zannin

Energy geostructures (EGs) employ heat exchangers embedded in concrete geostructures, such as piles, walls, tunnels, and sewers. In this study, energy walls (EWs) are studied with an emphasis on the following objectives: (1) to understand the fundamentals ...

2021

Generalized effective stress concept for saturated active clays

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

Experimental evidence shows that changes in pore-water chemistry can significantly affect the mechanical behavior of saturated active clays. Despite this evidence, how the chemical composition of the pore water can be considered in effective stress definit ...

2021

Page 2 sur 9