Recherche

Afficher tous les résultats pour

Accueil

Personne

Christian Leinenbach

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (62)

Theory-guided design of high-strength, high-melting point, ductile, low-density, single-phase BCC high entropy alloys

Christian Leinenbach, William Curtin, Carolina Baruffi, You Rao

The search for new high-temperature alloys that can enable higher-efficiency/lower-emissions power generation has accelerated with the discovery of body-centered cubic (bcc) refractory High Entropy Alloys (HEAs). These many-component, non-dilute alloys in ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Control of microstructure and shape memory properties of a Fe-Mn-Si-based shape memory alloy during laser powder bed fusion

Christian Leinenbach, Irene Ferretto

Fe-Mn-Si shape memory alloys are materials, whose functional properties strongly depend on microstructural factors such as grain size and orientation, phase fraction and chemical composition. The present study demonstrates the possibility of microstructure ...

ELSEVIER2022

Processability, microstructure and precipitation of a Zr-modified 2618 aluminium alloy fabricated by laser powder bed fusion

Christian Leinenbach, Xavier Maeder

Additive manufacturing offers the opportunity to produce complex geometries from novel alloys with improved properties. Adapting conventional alloys to the process-specific properties can facilitate rapid implementation of these materials in industrial pra ...

2022

Polarization contrast neutron imaging of magnetic crystallographic phases

Christian Leinenbach

Non-destructive characterization methods to observe phase transformations and thus, gain insights to transformation mechanisms in representative volumes are key for the development of advanced materials and manufacturing. Conventional methods are constrain ...

2022

Effect of thermomechanical treatment and microstructure on pseudo-elastic behavior of Fe-Mn-Si-Cr-Ni-(V, C) shape memory alloy

Christian Leinenbach, Dimitrios Lignos

This study systematically investigated the effects of heat and thermomechanical treatments on the pseudo-elastic behavior of an Fe-based shape-memory alloy (Fe???17Mn???5Si???10Cr???4Ni-1(V, C) %wt.). First, samples were solution-annealed at 1000 ???C for ...

2022

Effect of Y2O3 dispersoids on microstructure and creep properties of Hastelloy X processed by laser powder-bed fusion

Christian Leinenbach

Laser powder bed fusion (LPBF) was used to consolidate powders of a Ni-Cr-Fe-Mo alloy (Hastelloy X) blended with 1 wt% Y2O3 nanometric powders. The nearly-dense, crack-free specimens, with and without oxide dispersion strengthening (ODS), exhibit high-aspe ...

ELSEVIER2022

Effect of post-heat treatment conditions on shape memory property in 4D printed Fe-17Mn-5Si-10Cr-4Ni shape memory alloy

Christian Leinenbach, Irene Ferretto

The influence of post-heat treatment on the microstructure and properties of 4D printed Fe-17Mn-5Si-10Cr-4Ni (wt. %) shape memory alloy (SMA) produced via a laser powder bed fusion process is investigated in this study. It is shown that heat-treatment temp ...

2022

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

Jamasp Jhabvala, Christian Leinenbach, Roland Logé, Hossein Ghasemi Tabasi, Shreyas Sanjay Joglekar

The influence of Hf on the heat treatment response of a Laser Powder Bed Fusion (L-PBF) fabricated Ni-base superalloy was investigated. A Hf-free version of CM247LC, CM247LC NHf, and CM247LC (similar to 1.4 wt% Hf) were subjected to identical thermal treat ...

ELSEVIER SCIENCE INC2021

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Christian Leinenbach, Roland Logé, Nikola Kalentics, Markus Strobl

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

A parametric neutron Bragg edge imaging study of additively manufactured samples treated by laser shock peening

Christian Leinenbach, Roland Logé, Nikola Kalentics, Markus Strobl

Laser powder bed fusion is an additive manufacturing technique extensively used for the production of metallic components. Despite this process has reached a status at which parts are produced with mechanical properties comparable to those from conventiona ...

Nature Portfolio2021

3D laser shock peening - A new method for improving fatigue properties of selective laser melted parts

Christian Leinenbach, Manuel Ortega Varela De Seijas, Roland Logé, Nikola Kalentics

Although Selective Laser Melting (SLM) currently revolutionizes the way parts are being manufactured, certain process inherent limitations such as accumulation of residual stresses and increased porosity content can lead to a decrease in fatigue life of pr ...

ELSEVIER2020

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Jamasp Jhabvala, Christian Leinenbach, Roland Logé, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas, Rafal Wróbel

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020

Healing cracks in selective laser melting by 3D laser shock peening

Jamasp Jhabvala, Andreas Burn, Christian Leinenbach, Roland Logé, Nikola Kalentics, Hossein Ghasemi Tabasi, Navid Sohrabi

Selective Laser Melting (SLM) of Ni-based superalloys such as CM247LC is prone to weld-cracking. This paper investigates how to suppress cracks by repeatedly applying Laser Shock Peening (LSP) during the building phase of SLM. Samples made of CM247LC were ...

ELSEVIER2019

Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy

Christian Leinenbach

The microstructures of alloys created via Additive Manufacturing (AM) can vary substantially from those present in cast or wrought products, due to the very rapid solidification associated with AM. While numerous studies have investigated the process-micro ...

2018

Characterization of the deformation and phase transformation behavior of VC-free and VC-containing FeMnSi-based shape memory alloys by in situ neutron diffraction

Helena Van Swygenhoven, Christian Leinenbach, Steven Van Petegem

The stress-induced fcc-austenite to hcp-martensite transformation in the iron based shape memory alloy (SMA) Fe-17Mn-5Si-10Cr-4Ni with and without VC precipitates is investigated by in-situ neutron diffraction measurements upon uniaxial loading and unloadi ...

Elsevier Science Sa2017

3D Laser Shock Peening – A new method for the 3D control of residual stresses in Selective Laser Melting

Eric Boillat, Jamasp Jhabvala, Christian Leinenbach, Roland Logé, Nikola Kalentics

This paper describes a hybrid additive manufacturing process – 3D Laser Shock Peening (3D LSP), based on the integration of Laser Shock Peening (LSP) with selective laser melting (SLM). The well-known tensile residual stresses (TRS) in the as – built (AB) ...

Elsevier Sci Ltd2017

Creep and stress relaxation of a FeMnSi-based shape memory alloy at low temperatures

Cyril Cayron, Christian Leinenbach

The creep and stress relaxation behavior of a Fe-17Mn-5Si-10Cr-4Ni-1(V,C) (wt%) shape memory alloy at low homologous temperatures (-45 degrees C < T < 50 degrees C) was systematically studied in stress and strain controlled tensile tests. At constant stres ...

Elsevier2016

Experimental study and thermodynamic description of the Au-Cu-Ge system

Shan Jin, Christian Leinenbach

Phase equilibria in the Au-Cu-Ge ternary system, including the solid state phase relations at 450 degrees C as well as four vertical sections, were studied by means of scanning electron microscopy (SEM), electron probe microanalysis (EPMA), X-ray diffracti ...

Elsevier Science Sa2014

Wetting Behavior of Ternary Au-Ge-X (X = Sb, Sn) Alloys on Cu and Ni

Shan Jin, Christian Leinenbach

Au-Ge-based alloys are potential substitutes for Pb-rich solders currently used for high-temperature applications. In the present work, the wetting behavior of two Au-Ge-X (X = Sb, Sn) ternary alloys, i.e., Au-15Ge-17Sb and Au-13.7 Ge-15.3Sn (at.%), in con ...

Springer2013

Thermodynamic study and re-assessment of the Ge-Ni system

Robert Andrew Watson, Shan Jin, Christian Leinenbach

The enthalpies of formation of the intermetallic compounds in the Ge-Ni binary system have been determined by calorimetric measurement and first-principles calculations. Based on the results obtained and information available in the literature, the phase d ...

Pergamon-Elsevier Science Ltd2012

Page 3 sur 4