Publications de Ke Huang | EPFL Graph Search

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Wire-arc directed energy deposition (wire-arc DED), recognized for its ability to produce large-scale parts, has gained considerable attention. However, a critical issue with this method is the high prevalence of internal porosity defects found in the manu ...

Elsevier Science Sa2023

Update of inclusive cross sections of single and pairs of identified light charged hadrons

Olivier Schneider, Sun Hee Kim, Tagir Aushev, Mingkui Wang, Chao Wang, Ke Huang, Donghyun Kim, Yiming Li

We report new measurements of the production cross sections of pairs of charged pions and kaons as a function of their fractional energies using various fractional-energy definitions. Two different fractional-energy definitions were used and compared to th ...

American Physical Society2020

A critical assessment of experimental investigation of dynamic recrystallization of metallic materials

Roland Logé, Ke Huang

Dynamic recrystallization (DRX) often takes place during hot deformation of metallic materials, which then exerts significant influence on the final microstructures and mechanical properties of the formed components. A considerable number of published pape ...

2020

Azimuthal asymmetries of back-to-back pi(+/-) - (pi(0), eta, pi(+/-)) pairs in e(+) e(-) annihilation

Olivier Schneider, Sun Hee Kim, Tagir Aushev, Mingkui Wang, Chao Wang, Ke Huang, Ho Ling Li, Donghyun Kim, Yiming Li

This work reports the first observation of azimuthal asymmetries around the thrust axis in e(+)e(-) annihilation of pairs of back-to-back charged pions in one hemisphere, and pi(0) and eta mesons in the opposite hemisphere. These results are complemented b ...

American Physical Society2019

Observation of tau(-) -> pi(-)nu(tau)e(+)e(-) and search for tau(-) -> pi(-)nu(tau)mu(+)mu(-)

Olivier Schneider, Sun Hee Kim, Tagir Aushev, Mingkui Wang, Chao Wang, Ke Huang, Donghyun Kim, Lei Li, Yiming Li

We present the first measurements of branching fractions of rare tau-lepton decays, tau(-) -> pi(-)nu(tau)l(+)l(-) (l = e or mu), using a data sample corresponding to 562 fb(-1) collected at a center-of-mass energy of 10.58 GeV with the Belle detector at t ...

American Physical Society2019

Search for Omega(2012) -> K Xi(1530) -> K pi Xi at Belle

Olivier Schneider, Sun Hee Kim, Tagir Aushev, Mingkui Wang, Chao Wang, Ke Huang, Donghyun Kim, Lei Li, Yiming Li

Using data samples of e(+)e(-) collisions collected at the Upsilon(1S), Upsilon(2S), and Upsilon(3S) resonances with the Belle detector, we search for the three-body decay of the Omega(2012) baryon to K pi Xi. This decay is predicted to dominate for models ...

American Physical Society2019

Measurement of branching fraction and final-state asymmetry for the (B)over-bar(0) -> (KSK -/+)-K-0 pi(+/-) decay

Olivier Schneider, Sun Hee Kim, Tagir Aushev, Mingkui Wang, Chao Wang, Ke Huang, Jun Yong Kim, Donghyun Kim, Lei Li, Ji Hyun Kim, Yiming Li, Xiao Wang

We report a measurement of the branching fraction and final-state asymmetry for the (B) over bar -> (KSK -/+)-K-0 pi(+/-) decays. The analysis is based on a data sample of 711 fb(-1) collected at the gamma(4S) resonance with the Belle detector at the KEKB ...

American Physical Society2019

Laser shock peening: A promising tool for tailoring metallic microstructures in selective laser melting

Valerio Romano, Andreas Burn, Manuel Ortega Varela De Seijas, Roland Logé, Ke Huang, Nikola Kalentics

Metallic parts made by Selective Laser Melting (SLM) are known for their heterogeneous microstructures in the as-built (AB) state. In this paper, Laser Shock Peening (ISP) was performed on a 316 L stainless steel part fabricated by SLM. The LSP treatment i ...

2019

Search for a Light CP-odd Higgs Boson and Low-Mass Dark Matter at the Belle Experiment

Roberto Gargiani, Olivier Schneider, Sun Hee Kim, Tagir Aushev, Chao Wang, Hiroyasu Yamamoto, Yong Chan Choi, Seyed Sina Mirrazavi Salehian, Arnaud Michel Gelb, Ke Huang, Gaétan Charles Antoine Giriat, Jun Yong Kim, Mithilesh Nayak, Linlin Cao, Jiayun Shen, Tara Nanut, Donghyun Kim, Martin Lubej, Chang-Hyun Park, Lei Li, Ji Hyun Kim, Yiming Li

We report on the first Belle search for a light CP-odd Higgs boson, A(0), that decays into low mass dark matter, chi, in final states with a single photon and missing energy. We search for events produced via the dipion transition (sic)(2S) -> (sic)(1S)pi( ...

2019

Correlating oriented grain number density of recrystallisation in particle-containing aluminium alloys

Ke Huang

2018

Experimental and modelling study of an approach to enhance gas bulging formability of TA15 titanium alloy tube based on dynamic recrystallization

Jian Zhao, Ke Huang

2018

Microstructure and flow stress evolution during hot deformation of 304L austenitic stainless steel in variable thermomechanical conditions

Roland Logé, Ke Huang

Most of industrial hot deformation processes are performed in variable conditions where the strain rate and/or deformation temperature are not constant. In this work, hot compression tests in both constant and varying strain rate conditions were performed ...

Elsevier2018

The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials

Roland Logé, Ke Huang

Most industrial alloys contain a matrix phase and dispersed second-phase particles. Several thermomechanical processing (TMP) steps are usually needed to produce a final product, during which recrystallization and its related phenomena may take place. Seco ...

Elsevier2018

Study on the mixed dynamic recrystallization mechanism during the globularization process of laser-welded TA15 Ti-alloy joint under hot tensile deformation

Ke Huang, Gang Liu, Jie Zhao

In this article, the hot deformation mechanism of a laser-welded near a TA15 Ti-alloy joint was studied by hot tensile tests conducted at temperatures ranging from 800 degrees C to 900 degrees C with strain rates ranging from 1.0 x 10(-1) s(-1) to 1.0 x 10 ...

Elsevier2017

Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization

Roland Logé, Ke Huang

The recrystallization behaviour of Al-Mn alloys (AA3xxx series alloys) is affected by randomly distributed dispersoids present before annealing, by dispersoids precipitated at grain/subgrain boundaries before the onset of recrystallization, and by disperso ...

Elsevier2017

Effect of recrystallization on hot deformation mechanism of TA15 titanium alloy under uniaxial tension and biaxial gas bulging conditions

Ke Huang, Gang Liu

To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...

Elsevier2017

The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled Aluminium alloy

Cyril Cayron, Roland Logé, Ke Huang

Pronounced acceleration of recrystallization in cold worked metals is generally observed during annealing with additional high density electric current pulses. In this work, continuous alternating current of low density was applied to heat cold-rolled samp ...

Elsevier2017

The flow stress evolution and grain refinement mechanisms during hot deformation of Al-Mg alloy

Roland Logé, Ke Huang

In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...

2017

Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation

Ke Huang

The influence of concurrent precipitation on recrystallization is analyzed by comparing the nucleation and growth behavior of P ({011} 〈566〉), Cube ({001} 〈100〉), and 20 deg ND-rotated Cube ({001} 〈310〉, NDcube)-oriented grains in Al-xMn-Fe-Si (x = 0, 0.4, ...

Springer Verlag2016

A review of dynamic recrystallization phenomena in metallic materials

Roland Logé, Ke Huang

The dynamic recrystallization (DRX) phenomena occurring in different thermo-mechanical processing (TMP) conditions for various metallic materials are reviewed. Several types of DRX are described: discontinuous dynamic recrystallization (DDRX), continuous d ...

Elsevier Sci Ltd2016