Publications associées à A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

High throughput wide field second harmonic imaging of giant unilamellar vesicles

Sylvie Roke, Pierre-Marc Jean Marie Dansette, Maksim Eremchev, David Roesel

Cell-sized giant unilamellar vesicles (GUVs) are an ideal tool for understanding lipid membrane structure and properties. Label-free spatiotemporal images of their membrane potential and structure would greatly aid the quantitative understanding of membran ...

AIP Publishing2023

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Effects of thermal, mechanical, and electrostatic perturbations on lipid membrane hydration investigated by second harmonic imaging

Seonwoo Lee

Hydrated lipid bilayer membranes are crucial components of cells and organelles, serving as the outer boundary that separates the cellular components from the extracellular environment. Lipid membranes regulate their structures and functions by dynamically ...

EPFL2023

Robust Analog Multisensory Array System for Lossy Capacitive Sensors Over Long Distances

Sandro Carrara, Amar Kapic, Andromachi Tsirou

A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Homogenization theory captures macroscopic flow discontinuities across Janus membranes

François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna, Kevin Wittkowski

Janus membranes, thin permeable structures with chemical and geometrical asymmetric properties, show great potential in industrial separation processes. Yet the link between the micro- and macro-scale behaviours of these membranes needs to be established r ...

Cambridge University Press2023

Micro- or nanostructured optical element

Niels Quack, Dorian Giraud Herle

A micro- or nanostructured optical element (1) is proposed comprising: a membrane (3) with an array of holes (5), the membrane (3) comprising a membrane light wave facing surface; an array of pillars (7) sized and shaped such that a respective pillar (7) i ...

2023

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

Stress induced delamination of suspended MoS2 in aqueous environments

Aleksandra Radenovic, Michal Daniel Macha, Sanjin Marion, Mukeshchand Thakur

Applying hydrostatic pressure with suspended 2D material thin membranes allows probing the effects of lateral strain on the ion and fluid transport through nanopores. We demonstrate how both permanent and temporary delamination of 2D materials can be induc ...

ROYAL SOC CHEMISTRY2022

The Canopy Pavilion: A lightweight shading structure using a deployable auxetic linkage membrane

Etienne Bouleau, Dieter Dietz, Mark Pauly, Arthur François Blanc, Florin Isvoranu, Tian Chen

We present the Canopy Pavilion, a lightweight shading structure for a social gathering space. The shading surface is realized as a tensioned auxetic linkage membrane, composed of two double-curved anticlastic layers separated by a compression pole. The mem ...

2020

Oxygen enrichment of air: Performance guidelines for membranes based on techno-economic assessment

Kumar Varoon Agrawal, Marina Micari

The use of oxygen-enriched air (OEA) is an important strategy for reducing process cost and CO2 emissions in several industrial processes. Membrane-based processes, attributing to their high energy efficiency, are promising alternatives to cryogenic distil ...

ELSEVIER2022

Pressure-Induced Enlargement and Ionic Current Rectification in Symmetric Nanopores

Aleksandra Radenovic, Sebastian James Davis, Michal Daniel Macha, Sanjin Marion, Andrey Chernev

Nanopores in solid state membranes are a tool able to probe nanofluidic phenomena or can act as a single molecular sensor. They also have diverse applications in filtration, desalination, or osmotic power generation. Many of these applications involve chem ...

2020

Design Study of a 50-kA React-and-Wind Bi-2212 Cable for Fusion Magnet

Davide Uglietti

In the last few years, the current density of Bi-2212 wires has been greatly improved by filament densify technologies. One further step toward applications in fusion magnets is to design a high current cable, which must overcome the drawbacks of Bi-2212 w ...

IEEE Institute of Electrical and Electronics Engineers2020

Thermal and pH Sensitive Composite Membrane for On-Demand Drug Delivery by Applying an Alternating Magnetic Field

Giovanni Boero, Jürgen Brugger, Xiao Sheng Zhang, Ya Wang

Implantable drug delivery systems that can realize a scheduled drug release according to the needs of patients would be highly beneficial for the treatment of chronic diseases and cancer. Here, micrometer‐sized hydrogel particles with both thermal and pH s ...

2020

Comb Transducer for Generation of SH0 Mode in Crystalline Piezoelectric Membrane

Victor Plessky, Soumya Yandrapalli

It is shown that the comb IDT (CT) can efficiently excite SH0 mode in piezoelectric membrane of suitable orientation. The transducer has pitch equal to the wavelength (p=lambda) and the electrode size is half of the wavelength. As compared to conventional ...

IEEE2020

Three-dimensional electrodes for dielectrophoretic applications

Kevin Keim

This thesis reports the use of metal-coated three-dimensional SU-8 electrodes for dielectrophoretic bio sensing and particle manipulation applications. Placing free standing three-dimensional electrodes in microfluidic channels, electric fields can be appl ...

EPFL2020