Publications associées à Solution-Controlled Dissolution of Supplementary Cementitious Material Glasses at pH 13: The Effect of Solution Composition on Glass Dissolution Rates

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

This study deals with a comparison of the environmental performance of one-way slabs utilizing steel fibrereinforced limestone calcined clay cement (LC3) concrete with the control case of Ordinary Portland cement concrete. The experimental program constitu ...

Elsevier Sci Ltd2024

Contradict mechanism of long-term magnesium and sodium sulfate attacks of nano silica-modified cement mortars - Experimental and thermodynamic modeling

Qiao Wang

The mechanisms of external sulfate attack on cement mortars containing nano silica have been studied under full immersion conditions after 3 years. The sulfate degradation processes were compared between sodium sulfate and magnesium sulfate solutions with ...

Elsevier Sci Ltd2024

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Corentin Jean-Marie Rémi Noël

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

2024

The role of Zn in C-S-H atomic structure, nucleation and growth

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

Data-driven optimization tool for the functional, economic, and environmental properties of blended cement concrete using supplementary cementitious materials

Hisham Tarek Mohamed Hafez

The need to produce more sustainable concrete is proving imminent given the rising environmental concerns facing the industry. Blended cement concrete, based on any of the prominent supplementary cementitious materials (SCMs) such as fly ash, ground granul ...

ELSEVIER2023

Going Below 50% Clinker Factor in Limestone Calcined Clay Cements (LC3): A Comparison with Pozzolanic Cements from the South American Market

Karen Scrivener, Franco Alberto Zunino Sommariva

Limestone calcined clays are a promising technology as they offer similar performance to OPC from 7 days onwards, while enabling a reduction of the clinker content of 50%. In some regions of the world like South America, pozzolanic cements (i.e., blended c ...

SPRINGER INTERNATIONAL PUBLISHING AG2023

Atomistic modeling of C-S-H: bulk and surface

Ziga Casar

By replacing part of Portland cement with so-called supplementary cementitious materials (SCMs) it is possible to reduce the CO2 footprint of the cement industry. These SCMs are commonly limestone, calcined clay, slag and fly ash. While doing so the early ...

EPFL2023

Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete

Karen Scrivener, Matea Flegar

With the decrease in availability of common supplementary cementitious materials (SCMs) such as fly ash in Europe, the search for appropriate SCMs should be dealt with locally. A com-bination of abundant low-grade calcined clay and limestone powder has pro ...

AMER SOC TESTING MATERIALS2023

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

Atomic-Level and Surface Structure of Calcium Silicate Hydrate Nanofoils

Paul Bowen, Karen Scrivener, Aslam Kunhi Mohamed, Ziga Casar

Deciphering the calcium silicate hydrate (C-S-H) surface is crucial for unraveling the mechanisms of cement hydration and property development. Experimental observations of C-S-H in cement systems suggest a surface termination which is fundamentally differ ...

AMER CHEMICAL SOC2023

Influence of Low- to Medium-Kaolinite Clay on the Durability of Limestone Calcined Clay Cement (LC3) Concrete

Karen Scrivener, Matea Flegar

The kaolinite content is principally responsible for the durability performance of Limestone Calcined Clay Cement (LC3), which calls into question its global applicability. The clay supply has a significant impact on the LC3 system's reduced carbon footpri ...

MDPI2023

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Shashank Bishnoi, Franco Alberto Zunino Sommariva, Sreejith Krishnan

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

Does carbon footprint reduction impair mechanical properties and service life of concrete?

Karen Scrivener, Diana Londoño Zuluaga

The aim of this study is to evaluate how much the changes in the concrete mix design, which enable carbon footprint reduction, are impacting mechanical properties and predicted service life of concrete structure. The starting point of this study was concre ...

SPRINGER2023

Influence of temperature on phase assemblages of belite-ye'elimite cement

Karen Scrivener, Barbara Lothenbach, Natechanok Chitvoranund, Diana Londoño Zuluaga

This paper studies the effect of temperature on the phase assemblages of belite-ye'elimite cement. A comparison is made between thermodynamic modelling and experimental data at 28 and 180 days of hydration at 5, 20, 40, and 60 degrees C. The fast reaction ...

Pergamon-Elsevier Science Ltd2023

Effect of alkali, aluminium and equilibration time on calcium-silicate-hydrates

Yu Yan

Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...

EPFL2022

Report of RILEM TC 267-TRM phase 3: validation of the R-3 reactivity test across a wide range of materials

Mohsen Ben Haha, Karen Scrivener, François Henri Avet, Pawel Tadeusz Durdzinski, Ruben Anton Snellings, Xuerun Li, Diana Londoño Zuluaga, Alastair Thomas Matthew Marsh

RILEM TC 267 TRM- "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R-3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. ...

SPRINGER2022

Effect of different ions on dissolution rates of silica and feldspars at high pH

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri, Mahdieh Shakoorioskooie

The dissolution kinetics of silica-containing minerals in aggregates influences strongly the process of ASR in concrete. In this paper, the effect of different ions on the dissolution rates of SiO2 (amorphous and quartz) and feldspars at high pH values was ...

Pergamon-Elsevier Science Ltd2022

Hydration and durability of fast hardening binders incorporating supplementary cementitious materials

Sarra El Housseini

The use of supplementary cementitious materials (SCMs) is widely considered the most promis-ing approach to reduce CO2 emissions relative to cement production. SCMs are not commonly present in binders used for special applications. On the other hand, due t ...

EPFL2022

Nanoscale modelling of ionic transport in the porous C-S-H network

Khalil Ferjaoui

To reduce the CO2 footprint of construction materials, concrete producers blend their cement with Supplementary Cementitious Materials (SCMs). SCMs such as fly ash or blast furnace slag are mostly the byproducts of other industries. And while SCMs are chos ...

EPFL2022

The effect of paste composition, aggregate mineralogy and temperature on the pore solution composition and the extent of ASR expansion

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri

The reaction kinetics of the alkali silica reaction depends on the composition of the pore solution. The evolution of the pore solution composition in different cement pastes and concretes was studied. Pastes containing silica fume or metakaolin had the lo ...

SPRINGER2022