Publications associées à Analytical model of asymmetrical mixed-mode bending test of adhesively bonded GFRP joint

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

John Martin Kolinski, Chenzhuo Li, Xinyue Wei

This data package supports the publication 'Complexity of crack front geometry enhances toughness of brittle solids' by Xinyue Wei, Chenzhuo Li, Cían McCarthy, and John M. Kolinski Nature physics (2024) - https://doi.org/10.1038/s41567-024-02435-x DOI: 1 ...

Zenodo2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Novel multi-crack damage approach for pultruded fiber-polymer web-flange junctions

Thomas Keller

This paper aims to propose a novel approach to assess the multi-crack behavior of layered fiber-polymer composites. The Compliance and R-curves generated from this novel approach were useful to understand the multiple delamination process, enabling to eval ...

Elsevier Sci Ltd2023

Proposed residual stress model for hot‐rolled wide flange steel cross sections

Albano António De Abreu E Presa De Castro E Sousa, Dimitrios Lignos, Andronikos Skiadopoulos

Residual stresses in hot-rolled wide flange steel cross sections may lead to premature yielding, accelerated corrosion and brittle fracture of steel members. The above phenomena lead to a loss of a steel member's stiffness and resistance under mechanical l ...

Ernst & Sohn2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Automatic and high-precision acoustic emission-based structural health monitoring of concrete structures

Brice Tanguy Alphonse Lecampion, Seyyedmaalek Momeni

Acoustic emission (AE) monitoring is a useful technique to monitor the health of a structure continuously, helping to prevent potential failure. AE are elastic waves produced and emitted during fracture processes inside a material and are recorded by senso ...

DESTech publications inc.2023

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

2023

Three-dimensional stress state during dynamic shear rupture propagation along frictional interfaces in elastic plates

Jean-François Molinari, Roozbeh Rezakhani

The state of stress in plates, where one geometric dimensions is much smaller than the others, is often assumed to be of plane stress. This assumption is justified by the fact that the out-of-plane stress components are zero on the free-surfaces of a plate ...

ELSEVIER2022

Adhesive wear with a coarse-grained discrete element model

Jean-François Molinari, Son-Jonathan Pham-Ba

The use of molecular dynamics (MD) simulations has led to promising results to unravel the atomistic origins of adhesive wear, and in particular for the onset of wear at nanoscale surface asperities. However, MD simulations come with a high computational c ...

ELSEVIER SCIENCE SA2022

Numerical modeling of two-dimensional delamination growth in composite laminates with in-plane isotropy

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

The two-dimensional (2D) delamination growth in fiber-reinforced polymer (FRP) laminates with in-plane isotropy under Mode I loading condition was numerically investigated using finite element analyses. Two sizes of plate models were developed, focusing on ...

2021

Multi-scale modeling of aggregate interlock phenomena in concrete

Mohit Pundir

In concrete structures, opened cracks contribute significantly to the transfer of shear and normal stresses through the contact forces occurring between fractured surfaces. Such contact forces are due to protruding asperities, engaged by interlocking and f ...

EPFL2021

Hydraulic fracture growth in quasi-brittle materials

Dong Liu

Hydraulic fracturing is a technique often used in the oil and gas industry to enhance the production of wells in low-permeability reservoirs. It consists of fluid injection at a sufficiently large injection rate to create and propagate tensile fractures in ...

EPFL2021

Effect of water on sandstone's fracture toughness and frictional parameters: Brittle strength constraints

Marie Estelle Solange Violay, Corentin Jean-Marie Rémi Noël

Water presence causes a dramatic reduction of sandstone strength. Under compressive stress conditions, the strength of a rock sample is controlled by frictional parameters and the fracture toughness of the material. Here, we report fracture toughness, fric ...

2021

A plane‐strain hydraulic fracture driven by a shear‐thinning Carreau fluid

Brice Tanguy Alphonse Lecampion, Lucas Pereira

We study the propagation of a plane‐strain hydraulic fracture driven by a shear thinning fluid following a Carreau rheology. We restrict to the impermeable medium case and quantify in details the impact on fracture growth of the shear‐thinning properties o ...

2021

Planar hydraulic fracture growth perpendicular to the isotropy plane in a transversely isotropic material

Brice Tanguy Alphonse Lecampion, Fatima-Ezzahra Moukhtari, Haseeb Zia

The configuration of a hydraulic fracture (HF) propagating perpendicular to the isotropy plane of a transversely isotropic (TI) material is encountered in most sedimentary basins. We account for both elastic and fracture toughness anisotropy, and investiga ...

2020

Mixed-mode fracture response of anti-symmetric laminates: Experiments and modelling

John Botsis

Multidirectional laminates are very often used in advanced structures. However, the existing data in the literature regarding their fracture response is not conclusive. In this work, the fracture response of a +45 degrees// -45 degrees interface is investi ...

ELSEVIER SCI LTD2020

Propagation of fluid driven fractures in transversely isotropic material

Fatima-Ezzahra Moukhtari

The propagation of fluid driven fractures is used in a number of industrial applications (well stimulation of unconventional reservoirs, development of deep geothermal systems) but also occurs naturally (magmatic dyke intrusion). While the mechanics of hyd ...

EPFL2020

Experimental evaluation and modeling of fatigue of a 316L austenitic stainless steel in high-temperature water and air environments

Wen Chen

Austenitic stainless steels is used in many components of nuclear power plants, particularly in the pipes of cooling systems. Owing to power transients and to start-ups and shutdowns, these components are subjected to thermo-mechanical loadings (low-cycle ...

EPFL2020

Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches

Martin Antonio René Garcia

The objective of this thesis is to improve methods for predicting the fatigue life, multiaxial or not, of mild- and more particularly high-strength steels using local approaches that have the capacity to be applicable to almost any cases, hence the term ge ...

EPFL2020

A new data set of granitic rock strength values from Yosemite Valley, California: applications to rock fall assessment

To explore connections between rock strength and rock falls, we undertook a comprehensive rock mechanics testing program for six granitic rock types in Yosemite Valley (California, USA) where rock falls are a common geomorphic and sometimes hazardous proce ...

2020