Publications associées à Energy saving glazing with a wide band-pass FSS allowing mobile communication: up-scaling and characterisation

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

Cong Ding, Bowen Wang

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

Transparent structured conductive coating for applications in smart windows

Jérémy Jacques Antonin Fleury

Solar radiation reaching the surface of the earth for a period of one hour contains more energy than that consumed by mankind over an entire year. Some of this solar energy is already collected by photovoltaic cells to cover the electricity needs of buildi ...

EPFL2023

Tailoring Organic/Inorganic Interface Trap States of Metal Oxide/Polyimide toward Improved Vacuum Surface Insulation

Chao Wang, Guang-Yu Sun, Haoxiang Zhao

High-voltage and high-power devices are indispensablein spacecraftfor outer space explorations, whose operations require aerospace materialswith adequate vacuum surface insulation performance. Despite persistentattempts to fabricate such materials, current ...

AMER CHEMICAL SOC2023

Taking a step back from glass towers facades to make them compatible with the 2050 targets

Bernard Paule, Sergi Aguacil Moreno

Skyscrapers or glass towers are an extremely common model throughout the world. In the current context of climate change and resource depletion, we need to develop new postures towards these objects, especially for existing buildings that are becoming obso ...

2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Experimental study of the hydrodynamic and thermal performances of ventilated wall structures

Mohammad Rahiminejad, Dolaana Khovalyg

The presence of a ventilated air gap behind the external cladding in a building envelope is known to have a tangible contribution to the overall performance of the wall assembly. In the present study, the hydrodynamic and thermal performances of ventilated ...

2023

Fully reconfigurable MEMS-based second-order coupled-resonator optical waveguide (CROW) with ultra-low tuning energy

Niels Quack, Alain Yuji Takabayashi

Integrated microring resonators are well suited for wavelength-filtering applications in optical signal processing, and cascaded microring resonators allow flexible filter design in coupledresonator optical waveguide (CROW) configurations. However, the imp ...

Optica Publishing Group2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Discomfort glare from daylight: Influence of transmitted color and the eye's macular pigment

Sneha Jain

Designing architectural façades that allow sufficient daylight to create visually comfortable and pleasant environments is a challenging aspect of building design. It requires accounting for visual comfort and discomfort glare risks and understanding the f ...

EPFL2023

Toward Band n78 Shear Bulk Acoustic Resonators Using Crystalline Y-Cut Lithium Niobate Films With Spurious Suppression

Victor Plessky, Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli

This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...

Institute of Electrical and Electronics Engineers2023

A Wide-Frequency-Tuning Micro-Loop-Gap Resonator for Miniature Rubidium Vapor-Cell Atomic Frequency Standards

Anja Skrivervik, Yuanyan Su

To miniaturize the double-resonance (DR) rubidium (Rb) vapor-cell atomic clocks, a new type of micro-loop-gap microwave resonator (mu-LGR) is proposed for TE011-like mode where the magnetic field inside the cavity is homogeneous and oriented along its long ...

Institute of Electrical and Electronics Engineers2023

Thermal Conditions in Indoor Environments: Exploring the Reasoning behind Standard-Based Recommendations

Dolaana Khovalyg

Professionals in the building design and operation fields typically look at standards and guidelines as a reliable source of information and guidance with regard to procedural, contractual, and legal scope and requirements that are relevant to accountabili ...

2023

Glare analysis of an integral daylighting and lighting control strategy for offices

Stephen William Wasilewski

Complex Fenestration Systems (CFSs) can significantly impact both the visual and non-visual daylight effects on the occupants as well as the energy performance of buildings. To ensure that those impacts improve the overall situation, proper control algorit ...

2023

Combining thermal insulation and mobile communication in buildings: influence of laser-treated glazing on microwave propagation

Andreas Schueler, Josef Andreas Schuler, Luc Burnier, Jérémy Jacques Antonin Fleury, Héloïse Ludivine Delaporte

With the purpose of reducing the heating energy in buildings, it is common practice to install energy-efficient windows to increase the thermal insulation of a façade. These insulating glass units (IGIJ) include a thin silver coating acting as an infrared ...

IOP2022

Resiliency lessons of traditional living in nomadic yurts

Dolaana Khovalyg

Technological advancements in the 20th century have significantly changed modern lifestyles and housing. Modern homes are well-insulated, and people in them typically expect minimally varying indoor thermal environments, bought at significant operational a ...

Routledge2022

Measuring the effective thermal resistance of ventilated air-spaces behind common wall assemblies: Theoretical uncertainty analysis and recommendations for the hot box method modifications (ASHRAE 1759-RP)

Mohammad Rahiminejad, Dolaana Khovalyg

A well-designed ventilated wall that incorporates air-space behind cladding can reduce energy use for conditioning buildings by adding a thermally resistive layer. The scarcity of thermal performance data and standardized test methods is a particular barri ...

2022

Study of Thin Film LiNbO3 Laterally Excited Bulk Acoustic Resonators

Victor Plessky, Luis Guillermo Villanueva Torrijo, Hüseyin Baris Atakan, Soumya Yandrapalli

This work presents an in-depth study of simulation and measurement results of laterally excited shear bulk acoustic resonators (XBAR) in Lithium Niobate, at 5 GHz with high electromechanical coupling factor (k(t)(2)) as high as 25%, and with impedances at ...

Institute of Electrical and Electronics Engineers2022

Numerical and experimental study of the dynamic thermal resistance of ventilated air-spaces behind passive and active façades

Mohammad Rahiminejad, Dolaana Khovalyg

The variation of the thermo-hydrodynamic behavior of the airflow in the ventilated cavity behind external claddings in a wall structure could potentially affect the overall thermal resistance of the entire structure. Although the impact of an enclosed air- ...

2022