Publications associées à Rheology of highly concentrated planar fiber suspensions

Noise-induced transitions past the onset of a steady symmetry-breaking bifurcation: The case of the sudden expansion

François Gallaire, Edouard Boujo, Yves-Marie François Ducimetière

We consider fluid flows, governed by the Navier-Stokes equations, subject to a steady symmetry-breaking bifurcation and forced by a weak noise acting on a slow timescale. By generalizing the multiple-scale weakly nonlinear expansion technique employed in t ...

2024

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication

Roberto Guarino

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Aip Publishing2024

Quench Detection and Temperature Measurement With Fiber Optic Sensors

Davide Uglietti, Kamil Sedlák, Christoph Müller

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

IEEE Institute of Electrical and Electronics Engineers2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros

We seek to address how air entrapment mechanisms during infiltration are influenced by the wetting characteristics of the fluid and the pore network formed by the reinforcement. To this end, we evaluated the behavior of two model fluids with different surf ...

Elsevier Sci Ltd2023

Numerical simulation of immiscible incompressible viscous, viscoelastic and elastic multiphase flows

Léo Aurélio Diserens

A unified numerical framework is presented for the modelling of multiphasic viscoelastic and elastic flows. The rheologies considered range from incompressible Newtonian or Oldroyd-B viscoelastic fluids to Neo-Hookean elastic solids. The model is formulate ...

EPFL2023

Permeability sets the linear path instability of buoyancy-driven disks

François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna, Giovanni Vagnoli

The prediction of trajectories of buoyancy-driven objects immersed in a viscous fluid is a key problem in fluid dynamics. Simple-shaped objects, such as disks, present a great variety of trajectories, ranging from zig-zag to tumbling and chaotic motions. Y ...

Cambridge University Press2023

Influence of Viscous Lubricant on Nucleation and Propagation of Frictional Ruptures

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Federica Paglialunga

Fluids are pervasive in the Earth's crust and saturate fractures and faults. The combination of fluids and gouge layers developing along faults can generate fluids of different viscosities. Such viscous fluids were found to influence the reactivation, fric ...

2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros, Guillaume Clément Broggi

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

A Gyrokinetic Moment Model of the Plasma Boundary in Fusion Devices

Baptiste Jimmy Frei

The overall performance of fusion devices, such as tokamaks, is strongly correlated to the phenomena that occur in the boundary region, the outer plasma region that faces the wall of the device. The boundary plays a crucial role in regulating the heat and ...

EPFL2023

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Sofia Lydia Ntella

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Highly Efficient Miniaturized Magnetorheological Valves Using Electropermanent Magnets

Christian Köchli, Yves Perriard, Adrien Jean-Michel Thabuis, Kenny Jeanmonod, Sofia Lydia Ntella, Bhawnath Tiwari

Fluidic systems enable actuation in various applications, such as automotive, medical, and industrial robotics. Miniaturized valves constitute a fundamental controlling element of modern fluidic systems, intriguing the interest of many researchers. This le ...

2023

Process development of pre-impregnated hybrid thin-ply composites

Alexios Argyropoulos

Thin-ply composites, obtained with recently developed fiber spreading techniques, rapidly gained industrial interest because they offer a large composite design freedom, and lead to a composite tensile strength that is close to that of the individual fiber ...

EPFL2023

System for automated and dynamic cell culture

Julia Tischler

The present relates to a system for automated cell culture, the system comprising an inflow module, a cell culture plate and an outflow module, said inflow module being in fluid connection with the outflow module via the cell culture plate, the inflow modu ...

2023

Reactivation of variably sealed joints and permeability enhancement in geothermal reservoir rocks

Michael Heap, Alexandra Roma Larisa Kushnir

Hydraulic stimulation of enhanced deep geothermal reservoirs commonly targets pre-existing joint networks with the goal of increasing reservoir permeability. Here, we study the permeability and strength of joint-free and jointed Buntsandstein sandstones fr ...

2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Microfluidic device combining hydrodynamic and dielectrophoretic trapping for the controlled contact between single micro-sized objects and application to adhesion assays

Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp

The understanding of cell-cell and cell-matrix interactions via receptor and ligand binding relies on our ability to study the very first events of their contact. Of particular interest is the interaction between a T cell receptor and its cognate peptide-m ...

ROYAL SOC CHEMISTRY2023

Fluid flow through microcracked and fractured granitic reservoirs

Marie Estelle Solange Violay, Michael Heap, Lucille Jocelyne Nadine Carbillet

The permeability of crustal rocks and rock-masses dictates the efficiency of hydrothermal circulation and therefore the productivity of geothermal resources. In this study, we find by monitoring P-wave velocity that thermal microcracking in Lanhélin granit ...

2023

Modeling the mechanics and rheology of porous and granular media: an elastoplastic continuum approach

Lars Kristoffer Uhlen Blatny

The complex mechanics of porous and granular media play a significant role in various industrial processes and natural phenomena. As an example, understanding the mechanics of how failure occurs, localizes and propagates in porous brittle solids under vari ...

EPFL2023