Publications associées à Results of CO2 Laser-assisted Deep Sclerectomy as Compared With Conventional Deep Sclerectomy

A new self-adjustable glaucoma valve

Nikolaos Stergiopoulos, Stéphane Bigler, Julien Maxime Gerber, Soroush Rafiei

Introduction: Glaucoma, the leading cause of irreversible blindness globally, affects more than 70 million people across the world. When initial treatments prove ineffective, especially for cases with high intraocular pressure (IOP), the preferred approach ...

Frontiers Media Sa2024

Neuroprotection in the Retina: From Preventing Inflammatory Cell Death to Promoting Vascular Stability in the Central Nervous System

Bokyoung Kim

Glaucoma is one of the leading causes of irreversible blindness worldwide. Glaucoma is defined clinically as the presence of optic nerve head (ONH) degeneration and progressive loss of retinal ganglion cells (RGCs). Intra-ocular pressure (IOP) has been con ...

EPFL2024

Fast-Response Variable-Stiffness Magnetic Catheters for Minimally Invasive Surgery

Dario Floreano, Jun Shintake, Yi Sun, Yegor Piskarev, Matteo Righi

In minimally invasive surgery, such as cardiac ablation, magnetically steered catheters made of variable-stiffness materials can enable higher dexterity and higher force application to human tissue. However, the long transition time between soft and rigid ...

2024

On the interaction of femtosecond laser pulses with layered dielectric materials

Ruben Ricca

Materials properties are strictly dependent on their microstructure. The internal symmetries and the disposition of the constituting atoms of a material, which depend on its crystallographic structure, greatly affect its response to mechanical, electromagn ...

EPFL2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

In situ monitoring of femtosecond laser-induced modifications in dielectrics

Olivier Bernard

Over the last decades, the progress made in the generation of laser pulses shorter than a picosecond (10^-12 s) has allowed us to reach extreme optical power intensities exceeding 10^15 W cm^-2. This tremendous power has triggered an abundance of original ...

EPFL2023

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Olivier Bernard, Assim Boukhayma, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Modulation of Pulsatile Left Ventricular Afterload by Renal Denervation in Heart Failure With Preserved Ejection Fraction

Nikolaos Stergiopoulos, Stamatia Zoi Pagoulatou

Background:Arterial stiffening contributes to hemodynamic derangements in heart failure with preserved ejection fraction (HFpEF). We sought to investigate the impact of renal denervation on pulsatile left ventricular loading in patients with HFpEF and hype ...

Lippincott Williams & Wilkins2023

Cavitation induced by pulsed and continuous-wave fiber lasers in confinement

Christophe Moser, Jan Krizek

Bubbles generated with lasers in liquids under confinement have been investigated for their potential use as the driving mechanism for liquid micro-jets in various microfluidic devices, such as needle-free jet injectors. Here, we report on the study of bub ...

ELSEVIER SCIENCE INC2023

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Jianhang Yang, Jun Shintake, Vivek Ramachandran, Yegor Piskarev, Michael Dickey

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

Effect of femtosecond laser-induced high pressure on fused silica polymorphism

Arunkrishnan Radhakrishnan

High-pressure studies in silica are of great interest to earth and planetary sciences. Highpressure phases are rarely found in nature as a result of shock events like meteorite impacts or volcanic events in nature. Recreating these phases remains a challen ...

EPFL2022

In Vivo Retinal Pigment Epithelium Imaging using Transscleral Optical Imaging in Healthy Eyes

Christophe Moser, Mathieu Künzi, Timothé Laforest, Laura Emmanuelle Kowalczuk

Objective: To image healthy retinal pigment epithelial (RPE) cells in vivo using Transscleral OPtical Imaging (TOPI) and to analyze statistics of RPE cell features as a function of age, axial length (AL), and eccentricity. Design: Single-center, explorator ...

ELSEVIER2022

Engineering Absorption for Foil Applications

Sebastian Mader

Light matter interactions such as extinction, reflection, and transmission can be described by classical optics. Dur-ing the past decades, research focused on a novel resonant extinction type called plasmonics that allows for en-hancement of both types of ...

EPFL2022

Intraocular Lens Refractive Index and Its Impact on External Surface Reflections

Georges Wagnières

PURPOSE: To determine and compare the origin of the external surface reflections produced by commonly used intraocular lenses (IOLs). ...

SLACK INC2021

Laser Processing Methods for Perovskite Solar Cells and Modules

Mohammad Khaja Nazeeruddin

The perovskite photovoltaic technology is now transitioning from basic research to the pre-industrialization phase. In order to achieve reliable and high-performance commercial perovskite solar modules, high throughput manufacturing technologies must now b ...

WILEY-V C H VERLAG GMBH2021

Defect formation and mitigation during laser powder bed fusion of copper

Carl Tore Viktor Lindström

Additive manufacturing (AM) is a group of processing technologies which has the potential to revolutionize manufacturing by allowing easy manufacturing of complex shapes and small series. One AM-method which is of high interest for processing of metals is ...

EPFL2021

Application of virtual reality in neurosurgery: Patient missing. A systematic review

Bruno Herbelin, Olaf Blanke

Virtual reality (VR) technology had its earliest developments in the 1970s in the U.S. Air Force and has since evolved into a budding area of scientific research with many practical medical purposes. VR shows a high potential to benefit to learners and tra ...

2021

Laser treatment systems and methods for in-situ laser shock peening (lsp) treatment of parts during production thereof by a selective laser sintering or melting (sls/slm) process, and additive manufacturing systems and methods implementing the same

Roland Logé, Nikola Kalentics

There is described, in accordance with a first aspect of the invention, a laser treatment system and method for, in particular, imparting beneficial residual stresses into a desired part (P) during production thereof by a Selective Laser Sintering or Melti ...

2021

Time-Resolved Transmission Electron Microscopy: Instrumentation and Applications

Pavel Olshin

In recent decades, in situ electron microscopy has attracted considerable attention. The method enables real time observations of the transformations of nanoparticles under various stimuli with atomic spatial resolution. Time-resolved electron microscopy a ...

EPFL2021