Publications associées à Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The Structural Dispersity of Oligoethylene Glycol-Containing Polymer Brushes Determines Their Interfacial Properties

Harm-Anton Klok, Alberto Ongaro, Irene Filipucci

Ought to their bioinert properties and facile synthesis, poly[(oligoethylene glycol)methacrylate]s (POEGMAs) have been raised as attractive alternatives to poly(ethylene glycols) (PEGs) in an array of (bio)material applications, especially when they are ap ...

Amer Chemical Soc2024

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Zhao Meng

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Biobased Composites from Eugenol- and Coumarin-Derived Methacrylic Latex and Hemp Nanocellulose: Cross-Linking via [2+2] Photocycloaddition and Barrier Properties

Yves Leterrier, Sara Dalle Vacche

A novel-biobased latex was synthesized by redox-initiated emulsion copolymerization of ethoxy dihydroeugenyl methacrylate with 5 wt % of a photosensitive methacrylate containing a coumarin group. A stable copolymer latex having 16 wt % solids content and a ...

Amer Chemical Soc2024

New Polymers from Biomass-Derived Hydroxycinnamic Acid Derivatives

Ghezae Tekleab

Polymers play a central role in shaping our world across various fields, but their heavy reliance on petrochemicals poses climate change, environmental and health risks. To address and alleviate these issues, transitioning to sustainable polymers, sourced ...

EPFL2024

Influence of micro-patterned support properties and interfacial polymerization conditions on performance of patterned thin-film composite membranes

Kumar Varoon Agrawal, Cédric Karel J Van Goethem

Patterned membranes prepared via spray-modified non -solvent induced phase separation (s-NIPS) have successfully shown enhanced fluxes and better fouling control, thanks to the increased surface area and high fluid shear at the membrane/feed interface. The ...

Elsevier2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Supramolecular Polymer Brushes Grown by Surface-Initiated Atom Transfer Radical Polymerization from Cucurbit[7]uril-based Non-Covalent Initiators

Harm-Anton Klok, Friederike Katharina Metze, Irene Filipucci

Polymer brushes are densely grafted, chain end-tethered assemblies of polymers that can be produced via surface-initiated polymerization. Typically, this is accomplished using initiators or chain transfer agents that are covalently attached to the substrat ...

Wiley-VCH Verlag GmbH2023

Revealing the Formation Dynamics of Janus Polymer Particles: Insights from Experiments and Molecular Dynamics

Philip Robin Loche

Seeded emulsion polymerization is one of the best-known methods for preparing polymer particles with a controlled size, composition, and shape. It first requires the preparation of seed particles, which are then swollen with additional monomer (the same as ...

Amer Chemical Soc2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Opportunities, Challenges, and Pitfalls in Making, Characterizing, and Understanding Polymer Brushes

Harm-Anton Klok

Polymer brushes have been theoretically described, their behavior under diverse conditions has been modeled, and their preparation via surface-initiated polymerizations (SIPs) has been progressively refined. However, despite three decades of research endea ...

American Chemical Society2023

Supramolecular Polymer Brushes

Friederike Katharina Metze

Thin polymer coatings present a method to modify the surface properties of underlying substrates. Polymer-coated surfaces have been used as anticorrosive materials, surfaces with special wetting properties, antifriction materials, and as materials for biom ...

EPFL2023

Supramolecular Modifications of Semicrystalline Polymers

Michael Alan Giffin

Supramolecular interactions play an important role in defining the structure and the resulting mechanical properties of materials. For instance, interchain hydrogen-bonding in PAs gives them superior strength and stiffness in engineering materials, while t ...

EPFL2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Effects of Electrode Design on the Melt Electrowriting of Sinusoidal Structures

Biranche Tandon

Melt electrowriting is a microscale manufacturing technique that uses polymer-based melts to create fibrous structures. An electric field is used to stabilize a continuous molten jet, which is then written onto a substrate as a microscale fiber. Herein, it ...

WILEY-V C H VERLAG GMBH2023

Data-driven design of organic electronic materials

Jacob Terence Blaskovits

Singlet fission (SF) is a multiexciton-generating process whereby an excited state singlet (S1) is converted into two lower-energy triplets (T1). The inclusion of a SF-capable material into a photovoltaic device offers the potential for the absorption of p ...

EPFL2023

MPD and TMC supply as parameters to describe synthesis-morphology-performance relationships of polyamide thin film composite membranes

Kumar Varoon Agrawal, Cédric Karel J Van Goethem

This study assesses the influence during interfacial polymerization on polyamide thin film composite (TFC) morphology and performance of varying monomer concentrations and organic phases with widely varying physico-chemical characteristics (interfacial ten ...

ELSEVIER2023