Publications associées à Estimation of interfacial fracture toughness based on progressive edge delamination of a thin transparent coating on a polymer substrate

Strain-based analysis on the influence of local undercut geometry on fatigue crack initiation life

Alain Nussbaumer, Heikki Tapani Remes, Abinab Niraula

The local undercut defects at the weld toe provide a potential initiation site for fatigue cracks and significantly impact the structure's fatigue strength. The influence of continuous undercut depth on fatigue performance is widely studied, but the resear ...

2024

Nanostructure and Optical Property Tailoring of Zinc Tin Nitride Thin Films through Phenomenological Decoupling: A Pathway to Enhanced Control

Aïcha Hessler-Wyser, Johann Michler, Amit Sharma, Daniele Casari, Caroline Hain, Thomas Nelis

This work addresses the need for precise control of thin film sputtering processes to enable thin film material tailoring on the example of zinc tin nitride (ZTN) thin films deposited via microwave plasma-assisted high power reactive magnetron sputtering ( ...

Amer Chemical Soc2024

Investigations on Caesium Dispersion and Molybdenum Coating on SPIDER Components

Michele Fadone

SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydroge ...

2023

RADCAM-A radiation camera system combining foil bolometers, AXUV diodes, and filtered soft x-ray diodes

Basil Duval, Umar Sheikh, Luke Simons

Measurements of radiated power are critical for characterizing and optimizing tokamak performance. The RADCAM system, comprising arrays of foil bolometers, Absolute eXtreme UltraViolet (AXUV), and filtered soft x-ray diodes, has been constructed to provide ...

2022

Stabilized isogeometric discretizations on trimmed and union geometries, and weak imposition of the boundary conditions for the Darcy flow

Riccardo Puppi

Modern manufacturing engineering is based on a ``design-through-analysis'' workflow. According to this paradigm, a prototype is first designed with Computer-aided-design (CAD) software and then finalized by simulating its physical behavior, which usually i ...

EPFL2022

GeoNeRF: Generalizing NeRF with Geometry Priors

François Fleuret

We present GeoNeRF, a generalizable photorealistic novel view synthesis method based on neural radiance fields. Our approach consists of two main stages: a geometry reasoner and a renderer. To render a novel view, the geometry reasoner first constructs cas ...

IEEE COMPUTER SOC2022

Overlapping Multipatch Isogeometric Method With Minimal Stabilization

Annalisa Buffa, Pablo Antolin Sanchez, Riccardo Puppi, Xiaodong Wei

We present a novel method for isogeometric analysis (IGA) to directly work on geometries constructed by Boolean operations including difference (i.e., trimming), union, and intersection. Particularly, this work focuses on the union operation, which involve ...

SIAM PUBLICATIONS2021

Structural elucidation and antibacterial activity of new dialkylstannyl- and chlorodialkylstannyl(IV) 3,4-dihydroisoquinoline-2-(1H)-carbodithioate

Rosario Scopelliti

In extension with growing concern to develop new antimicrobial organometallic drugs, an attempt has been made to synthesize five new antimicrobial organotin(IV) carbodithioates with general formula, Me2SnClL (1), Me2SnL2 (2), Et2SnClL (3), Et2SnL2 (4), Bu2 ...

ELSEVIER2021

Local excitations in amorphous solids

Wencheng Ji

Amorphous solids are structurally disordered. They are very common and include glasses, colloids, and granular materials, but are far less understood than crystalline solids. Key aspects of these materials are controlled by the presence of excitations in w ...

EPFL2021

Buckling of pressurized spherical shells containing a through-thickness defect

Pedro Miguel Nunes Pereira de Almeida Reis, Matteo Pezzulla, Dong Yan

We present a study on the pressure buckling of thin, elastic spherical shells containing a thickness defect. Methodologically, we combine precision model experiments, finite element simulations, and a reduced axisymmetric shell model. We observe qualitativ ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Instability of a thin viscous film flowing under an inclined substrate: steady patterns

Gioele Mariano Nicolò Balestra, François Gallaire, Gaëtan Pierre Clément Lerisson, Pier Giuseppe Ledda

The flow of a thin film coating the underside of an inclined substrate is studied. We measure experimentally spatial growth rates and compare them to the linear stability analysis of a flat film modelled by the lubrication equation. When forced by a statio ...

Cambridge University Press2020

Heterogeneous catalyst preparation by liquid-phase atomic layer deposition

Benjamin Pierre Le Monnier

Heterogeneous catalyst preparation has been performed for close to a century but has been rapidly evolving spurred by the evolution in synthetic techniques and growing needs in energy, chemicals and materials. An increasing number of catalyst synthesis str ...

EPFL2020

Mechanical properties of a balsa wood veneer structural sandwich core material

Thomas Keller, Anastasios Vassilopoulos, Niloufar Vahedi

Balsa wood is an appropriate core material for structural sandwich applications due to its high strength- and stiffness-to-weight ratios. However, the mechanical properties vary considerably owing to the inherent scattering of natural wood materials. One a ...

2020

Gallium-Based Thin Films for Wearable Sensors and Electronic Skins

Laurent Mirko Dejace

Integrated wearable electronics capable of providing biophysical information on complex and dynamic systems have attracted high interest in diverse fields such as healthcare, gaming and robotics. Wearable sensors can create artificial, electronic skins wit ...

EPFL2020

Experiments and modelling for glow discharge plasmas applied to niobium sputter deposition in superconducting radiofrequency cavities

Thibaut François Hugo Richard

Thin film coatings are ubiquitous in modern daily lives, from the semi-conductor industry to aesthetic applications, and rely on the modification of a given material to enhance its surface properties. At CERN (European Organization for Nuclear Research), t ...

EPFL2019

Novel daylighting system based on advanced embedded optical microstructures for various facade orientation and climates

Jing Gong

The design of highly glazed building has become a worldwide trend in modern architecture. However, glazing may induce large thermal loss in winter while increase cooling load in summer, and it may also cause glare. In order to solve the problems, a novel m ...

EPFL2019

The mechanics of crack-tip dislocation emission and twinning

Predrag Andric

Dislocation emission from a crack tip is a necessary mechanism for crack tip blunting and toughening. A material is intrinsically ductile under Mode I loading when the critical stress intensity

K_{Ie}

for dislocation emission is lower than the critical s ...

EPFL2019

A Review and Mathematical Treatment of Infinity on the Smith Chart, 3D Smith Chart and Hyperbolic Smith Chart

Mihai Adrian Ionescu, Andrei Müller

This work describes the geometry behind the Smith chart, recent 3D Smith chart tool and previously reported conceptual Hyperbolic Smith chart. We present the geometrical properties of the transformations used in creating them by means of inversive geometry ...

MDPI2018

Feasibility study on a novel daylighting system with embedded micro compound parabolic concentrators (CPCs)

Jean-Louis Scartezzini, Andreas Schueler, André Gabriel Kostro, Jing Gong

A novel glazing system consisting of a polymer layer with embedded micro compound parabolic concentrators (CPCs), which is attached to a glass pane of glazing, is proposed. It aims to reduce the energy consumption due to cooling in buildings, provide dayli ...

SPIE-INT SOC OPTICAL ENGINEERING2018

Investigations and numerical modeling of mechanical properties of tempered martensitic steel Eurofer97 at various loading rates, temperatures and after spallation irradiation

Serafin Knitel

The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...

EPFL2018