Publications associées à Relief of edge effects in bi-adhesive composite joints

Critical degeneracy in a nonlinear hyperbolic equation can produce atypical instability

This paper deals with the initial value problem for a semilinear wave equation on a bounded domain and solutions are required to vanish on the boundary of this domain. The essential feature of the situation considered here is that the ellipticity of the sp ...

2024

Energy dissipation in fiber-polymer composites adhesive joints under cyclic loading

Ghazaleh Eslami

Sustainable development has emerged as a paramount consideration in various fields of industry, including construction, to preserve the environment and its finite resources. Lightweight structures, such as fiber-polymer composite structures, address both s ...

EPFL2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Control-oriented modeling and analysis of tubular dielectric elastomer actuators dedicated to cardiac assist devices

Yves Perriard, Yoan René Cyrille Civet, Ning Liu, Thomas Guillaume Martinez, Armando Matthieu Walter

This paper deals with the control-oriented modeling of a multilayered dielectric elastomer actuator based tube. The actuator is clamped at both sides and performs a radial displacement. The hyperelastic deformation and the viscoelastic performance, togethe ...

2022

Manufacturing and toughening effects on the material properties of wind turbine blade adhesives

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid adhesives can be developed using commercially available adhesive materials and customized to the required loading conditions. In this paper, SPABONDTM 820HTA (non-toughened) and SPABONDTM 840HTA (toughened) adhesives are hybridized by two strategies ...

2022

Experimental Method to Distinguish between a Solution and a Suspension

Francesco Stellacci, Quy Ong Khac, Paulo Henrique Jacob Silva, Ting Mao, Xufeng Xu

Dispersion of objects in a fluid phase can be classified as solutions (Gibbs free energy of mixing, Delta G(mix) < 0) or suspensions (Delta G(mix) > 0) depending on their thermodynamic stability. Small objects tend to form solutions, larger ones suspension ...

WILEY2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined por ...

FRONTIERS MEDIA SA2022

A complete description of thermodynamic stabilities of molecular crystals

Venkat Kapil, Edgar Albert Engel

Predictions of relative stabilities of (competing) molecular crystals are of great technological relevance, most notably for the pharmaceutical industry. However, they present a long-standing challenge for modeling, as often minuscule free energy differenc ...

National Academy of Sciences2022

Design and Development of Injectable, Tough and Intrinsically-Adhesive Hydrogels for Biomedical Applications

Peyman Karami

Despite the development of hydrogels with a wide range of mechanical properties, insufficient adhesion between these materials and biological surfaces limits their use in the biomedical applications. Most recent advancements in highly adhesive hydrogel sys ...

EPFL2021

Review of fatigue of bulk structural adhesives and thick adhesive joints

Anastasios Vassilopoulos

Fatigue of structural adhesives has been investigated through joints and a little number of works investigate bulk adhesive behaviour itself. Aerospace and automotive engineering focuses more on joint configuration studies, which are correlated with practi ...

TAYLOR & FRANCIS LTD2021

First principles study of the effect of hydrogen in austenitic stainless steels and high entropy alloys

William Curtin, Xiao Zhou

Hydrogen (H) embrittlement in multicomponent austenitic alloys is a serious limitation to their application in many environments. Recent experiments show that the High-Entropy Alloy (HEA) CoCrFeMnNi absorbs more H than 304 Stainless Steel but is less prone ...

2020

On the stabilizing effect of rotation in the 3d Euler equations

Klaus Martin Widmayer

While it is well known that constant rotation induces linear dispersive effects in various fluid models, we study here its effect on long time nonlinear dynamics in the inviscid setting. More precisely, we investigate stability in the 3d rotating Euler equ ...

2020

Stress mitigation for adhesively bonded photovoltaics with fibre reinforced polymer composites in load carrying applications

Thomas Keller, Yu Bai

Structural loads, especially in-plane compression, may cause local buckling and debonding of the photovoltaic (PV) cells that are mechanically integrated with structural members and this may lead to degradation in their electrical performance. This paper p ...

ELSEVIER SCI LTD2019

Turbulent patterns in wall-bounded shear flows: invariant solutions and their bifurcations

Florian Reetz

When laminar shear flows in large wall-bounded domains transition to turbulence, the flow exhibits spatio-temporally chaotic dynamics. Despite its chaotic dynamics, the flow may self-organize into characteristic spatially periodic patterns of unknown origi ...

EPFL2019

Ductile adhesively-bonded timber joints - Part 1: Experimental investigation

Thomas Keller, Anastasios Vassilopoulos, Myrsini Angelidi

In the field of timber load-bearing structures, adhesive bonding is a promising joining technique that may increase the structural stiffness and capacity of timber joints and structures. The use of ductile adhesives may furthermore allow designing ductile ...

2018

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures

Aurelio Muttoni, Miguel Fernández Ruiz

Large efforts have been devoted in the past to understanding size effect in shear failures of members without transverse reinforcement. Experimental works have demonstrated that increasing the size reduces the nominal shear strength provided that the failu ...

2018

Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres

Véronique Michaud, Amaël Maximilien Cohades, Lode Geeraard Daelemans

Phase-separated blends of epoxy and poly(ε-caprolactone) (PCL) provide crack repair in composites after a thermal treatment at 150 °C, but decrease the material’s fracture toughness. This article investigates the combination of healing with interlaminar fr ...

2018

Thermo-mechanical stability of lightweight glass-free photovoltaic modules based on a composite substrate

Christophe Ballif, Valentin Chapuis, Hengyu Li, Laure-Emmanuelle Perret Aebi, Ana Cristina Oliveira Martins, Alessandro Francesco Aldo Virtuani

Lightweight PV modules are attractive for building-integrated photovoltaic (BIPV) applications, especially for renovated buildings, where the additional load bearing capacity is limited. This work focuses on the development of a lightweight, glass-free pho ...

ELSEVIER SCIENCE BV2018

Ductility of adhesively bonded timber joints

Thomas Keller, Anastasios Vassilopoulos, Myrsini Angelidi

In the field of timber engineering, adhesive bonding remains a promising, though poorly developed, joining technique that may increase the structural stiffness and capacity of timber joints and structures. Selecting ductile adhesives may further allow to c ...

WIT Press2017