Publications associées à Built-in, exposed or concealed comfort services. Attempts (incomplete) to industrialise collective housing after 1945

Teaching Not To

Two design studios were successively taught in two schools of architecture: one at the Harvard Graduate School of Design (GSD) and the other at the Swiss Federal Institute of Technology in Lausanne (EPFL) in Lausanne, Switzerland, based on "A Global Morato ...

Taylor & Francis Inc2024

An explorative method to support design decisions based on carbon constraints and daylight sufficiency needs

Nazanin Rezaei Oghazi

The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...

EPFL2024

Correlating long-term performance and aging behaviour of building integrated PV modules

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Ebrar Özkalay

Because building-integrated photovoltaic (BIPV) modules are fully integrated into a building envelope, the back of the module can be exposed to little or no ventilation, resulting in increased operating temperatures. As the temperature increases, the perfo ...

Elsevier Science Sa2024

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Maléna Bastien Masse, Numa Joy Bertola, Célia Marine Küpfer, Corentin Jean Dominique Fivet

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Rising from rubble - Leveraging existing construction tools for upcycling concrete waste into slender walls

Katrin Beyer, Maxence Grangeot, Corentin Jean Dominique Fivet, Qianqing Wang, Stefana Parascho

In this paper, we present a new method for upcycling concrete rubble waste into slender walls through the lightweight digital augmentation of mainstream construction machines. By using such method, the environmental impact of concrete construction and demo ...

Springer2024

What is NExT? A new conceptual model for comfort, satisfaction, health, and well-being in buildings

Dusan Licina

Buildings are designed to respond to functional and regulatory needs, providing comfortable conditions to occupants, offering satisfactory environmental settings, minimising health risks, and enhancing individual and collective quality of life. Although th ...

Pergamon-Elsevier Science Ltd2024

Embodied Carbon Premium for Cantilevers

David Michael Volpe Ruggiero, Paola Costanza Miglietta

This study addresses the critical need for sustainable architectural designs within the context of climate change and the significant role the built environment plays in greenhouse gas emissions. The focus of this paper is on understanding the influence of ...

2024

Exploring High-Performance and Energy-Efficient Architectures for Edge AI-Enabled Applications

Joshua Alexander Harrison Klein

The desire and ability to place AI-enabled applications on the edge has grown significantly in recent years. However, the compute-, area-, and power-constrained nature of edge devices are stressed by the needs of the AI-enabled applications, due to a gener ...

EPFL2024

Spatial Modeling for Building Design Evaluation: from Visual Landscape Quality Assessment to Devaluation Risk Estimation

Adam Robert Swietek

Zoning reform is a crucial tool for cities to adapt to contemporary challenges. However, its implementation remains challenging. Property owners, with a vested interest in the value of their neighborhoods, are sensitive to local developments and the potent ...

EPFL2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Luc Girardin, François Maréchal, Raphaël Briguet, Ana Catarina Gouveia Braz, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Dario Redaelli, Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

Fusing Pre-existing Knowledge and Machine Learning for Enhanced Building Thermal Modeling and Control

Loris Di Natale

Buildings play a pivotal role in the ongoing worldwide energy transition, accounting for 30% of the global energy consumption. With traditional engineering solutions reaching their limits to tackle such large-scale problems, data-driven methods and Machine ...

EPFL2024

Experimental study of the hydrodynamic and thermal performances of ventilated wall structures

Mohammad Rahiminejad, Dolaana Khovalyg

The presence of a ventilated air gap behind the external cladding in a building envelope is known to have a tangible contribution to the overall performance of the wall assembly. In the present study, the hydrodynamic and thermal performances of ventilated ...

2023

Influence of outdoor air pollution on European residential ventilative cooling potential

Dusan Licina, Evangelos Belias

Residential ventilative cooling via natural ventilation is influenced by outdoor air pollution. However, relative to climate, outdoor air pollution is not comprehensively considered in determining the ventilative cooling potential of buildings. To assess t ...

ELSEVIER SCIENCE SA2023

Transparent structured conductive coating for applications in smart windows

Jérémy Jacques Antonin Fleury

Solar radiation reaching the surface of the earth for a period of one hour contains more energy than that consumed by mankind over an entire year. Some of this solar energy is already collected by photovoltaic cells to cover the electricity needs of buildi ...

EPFL2023

Taking a step back from glass towers facades to make them compatible with the 2050 targets

Bernard Paule, Sergi Aguacil Moreno

Skyscrapers or glass towers are an extremely common model throughout the world. In the current context of climate change and resource depletion, we need to develop new postures towards these objects, especially for existing buildings that are becoming obso ...

2023

Building ventilation and outdoor air pollution: Implications for health, comfort and energy

Evangelos Belias

As humans spend most of their time indoors, indoor air quality (IAQ) significantly impacts their health. In parallel, building ventilation consumes significant energy, contributing to climate change. However, the relationships between the building ventilat ...

EPFL2023

Preserving suspended structures with light façades (1960-1980). Architectural study and retrofitting proposals

Giuseppe Galbiati

Nowadays, the energy efficiency of the existing building stock is internationally accepted as a topical issue. Energy retrofitting is encouraged, improving the thermal performances of buildings, but often altering the historical image of our cities. Attent ...

EPFL2023

Autodigit-RAD: Towards an automation of the radon’s concentration dataflow in a new and innovative building

Sebastian Duque Mahecha, Sergi Aguacil Moreno

Radon is a noble, natural, and radioactive gas coming mainly from the ground which might accumulate indoors and lead each year to 200-300 deaths from lung cancer in Switzerland. A brand new and innovative living lab will be built as of 2023 in Fribourg (Sw ...

2023

Energy, SBS symptoms, and productivity in Swiss open-space offices: Economic evaluation of standard, actual, and optimum scenarios

Cecile Anne Berquand, Dusan Licina, Dolaana Khovalyg, Arnab Chatterjee, Verena Marie Barthelmes

The fundamental aspiration of new-generation high-performing buildings is to reduce energy use while securing indoor environmental quality conducive to human health and productivity. However, existing frameworks for identifying Key Performance Indicators ( ...

PERGAMON-ELSEVIER SCIENCE LTD2023