Publications associées à Device comprising electrical contacts and its production process

Pyroresistive response of percolating conductive polymer composites

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

The time-domain Cartesian multipole expansion of electromagnetic fields

Farhad Rachidi-Haeri, Marcos Rubinstein, Nicolas Mora Parra, Elias Per Joachim Le Boudec, Emanuela Radici, Chaouki Kasmi

Time-domain solutions of Maxwell’s equations in homogeneous and isotropic media are paramount to studying transient or broadband phenomena. However, analytical solutions are generally unavailable for practical applications, while numerical solutions are co ...

Nature Publishing Group2024

DC Power Distribution Networks with Direct Current Transformers

Renan Pillon Barcelos

The shift towards DC power distribution networks, enabled by power electronics technologies, is changing the nature of electrical power systems. Nowadays, DC power distribution networks can effectively support the high penetration of distributed energy res ...

EPFL2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Christophe Marcel Georges Galland, Sakthi Priya Amirtharaj, Wen Chen, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Benign termination of runaway electron beams on ASDEX Upgrade and TCV

Basil Duval, Stefano Coda, Joan Decker, Umar Sheikh, Jean Arthur Cazabonne, Claudia Colandrea, Luke Simons, Gergely Papp, Bernhard Sieglin

This paper discusses the development of a benign termination scenario for runaway electron (RE) beams on ASDEX Upgrade and TCV. A systematic study revealed that a low electron density (n e) companion plasma was required to achieve a large MHD instability, ...

Iop Publishing Ltd2024

Direct observations of X-rays produced by upward positive lightning

Farhad Rachidi-Haeri, Marcos Rubinstein, Antonio Sunjerga, Thomas Chaumont

X-rays have been observed in natural downward cloud-to-ground lightning for over 20 years and in rocket-triggered lightning for slightly less. In both cases, this energetic radiation has been detected during the stepped and dart leader phases of downward n ...

Nature Publishing Group2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Design and Development of a Diagnostic System for a Non-Intercepting Direct Measure of the SPIDER Ion Source Beamlet Current

Stable and uniform beams with low divergence are required in particle accelerators; therefore, beyond the accelerated current, measuring the beam current spatial uniformity and stability over time is necessary to assess the beam performance, since these pa ...

MDPI2023

Beam homogeneity of caesium seeded SPIDER using a direct beamlet current measurement

The ITER Heating Neutral Beam (HNB) source prototype SPIDER (Source for the Production of Ions of Deuterium Extracted from a Radio frequency plasma), hosted at the Neutral Beam Test Facility (NBTF) in Padova, Italy, has recently started operating with evap ...

ELSEVIER SCIENCE SA2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Aïcha Hessler-Wyser, Franz-Josef Haug, Luca Massimiliano Antognini, Julien Hurni, Ezgi Genç, Sofia Libraro, Audrey Marie Isabelle Morisset

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

First self-consistent simulations of trapped electron clouds in a gyrotron gun and comparison with experiments

Stefano Alberti, Jean-Philippe Hogge, Joaquim Loizu Cisquella, Ioannis Pagonakis, Jérémy Genoud, Francesco Romano

We report on the initial validation of the novel code FENNECS, which simulates the spontaneous formation of trapped electron clouds in coaxial geometries with strong externally applied azimuthal flows and in the presence of a residual neutral gas. For this ...

American Institute of Physics (AIP)2023

Multiphysics model for assessing photoelectrochemical phenomena under concentrated irradiation

Sophia Haussener, Isaac Thomas Holmes-Gentle, Franky Esteban Bedoya Lora

A multiphysics model was developed for a photoelectrochemical (PEC) cell at the device level to simulate water splitting operating under concentrated irradiation (between 50 to 600 kW m−2). The 2D model couples charge, heat, mass, photon, and momentum tran ...

2023

Cardiovascular response to closed-loop intraneural stimulation of the right vagus nerve: a proof-of-concept study

Silvestro Micera

Vagus nerve stimulation (VNS) is an FDA-approved technique for the neuromodulation of the autonomic nervous system. There are many therapeutic applications where VNS could be used as a therapy, such as cardiovascular diseases, epilepsy, depression, and inf ...

IEEE2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

A 0.21-ps FOM Capacitor-Less Analog LDO with Dual-Range Load Current for Biomedical Applications

Mahsa Shoaran, Yasemin Engür

This paper presents an output capacitor-less low-dropout regulator (LDO) with a bias switching scheme for biomedical applications with dual-range load currents. Power optimization is crucial for systems with multiple activation modes such as neural interfa ...

ArXiv2023

Modal engineering of electromagnetic circuits to achieve rapid settling times

Matthias Imboden

Inductive circuits and devices are ubiquitous and important design elements in many applications, such as magnetic drives, galvanometers, magnetic scanners, applying direct current (DC) magnetic fields to systems, radio frequency coils in nuclear magnetic ...

AIP Publishing2023

Device, system, and method for ion fragmentation by use of an ion mobility device and messenger tagging

Thomas Rizzo, Ahmed Ben Faleh, Stephan Warnke

A device for fragmenting ions by collision induced dissociation, the device intended to be used together with a planar ion mobility apparatus, the device including a first conductive grid having a plurality of first openings, the first conductive grid conf ...

2023

ICRH assisted breakdown study on JET

Thomas Binderup Jensen, Benoît Labit, Haomin Sun

Ion cyclotron (IC) wave assisted breakdown has the potential to increase the robustness of plasma initiation during the ITER pre-fusion operation phase. Studies were performed at JET at ITER relevant loop electric field, E-loop ? 0.33 Vm(-1), and a range o ...

IOP Publishing Ltd2023

A review of the modeling approaches of the lightning M-component with special attention to their current and electric field characteristics

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci, Mohammad Azadifar, Qi Li

In this paper, we present the characteristics of current, electric fields and modeling approaches of lightning M-component mode of charge transfer. We consider both the classical M-components (occurring after return strokes) and M-component-type ICC (Initi ...

Elsevier2023