Publications associées à Beam-induced etching of material on substrate involves directing gaseous compound which reacts in the presence of beam to etch the excess material which not etching the substrate

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

High density lithium niobate photonic integrated circuits

Rui Ning Wang, Tobias Kippenberg, Mikhail Churaev, Anat Siddharth, Zelin Tan, Nikolai Kuznetsov, Zihan Li, Junyin Zhang

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but ar ...

Nature Portfolio2023

Characterization of transversely confined electron beam-generated plasma using two-dimensional particle-in-cell simulations

Guang-Yu Sun, Haomin Sun

Electron beam-generated plasmas (EBPs) have been used to modify the surface properties. In certain applications, EBPs are transversely confined and their properties are of value to the treatment. In this paper, the characteristics of an electron beam-gener ...

American Institute of Physics (AIP)2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

Charge Dynamics Electron Microscopy Nanoscale Imaging of Femtosecond Plasma Dynamics

Thomas La Grange, Fabrizio Carbone, Luca Piazza, Ivan Madan, Tom Theodorus Antonius Lummen, Gabriele Berruto, Giovanni Maria Vanacore, Francesco Barantani, Ido Kaminer, Simone Gargiulo

Understanding and actively controlling the spatiotemporal dynamics of nonequilibrium electron clouds is fundamental for the design of light and electron sources, high power electronic devices, and plasma-based applications. However, electron clouds evolve ...

AMER CHEMICAL SOC2023

Controlling motion at the nanoscale with light

Mintae Chung

Optical manipulation at the micro- nano-scale is a fascinating topic due to its inherent non-invasive properties and multifaceted applications in various fields such as biology, sensing, micro-fluidics, and micro- nano-robotics. This thesis involves intens ...

EPFL2022

Demonstrating and Unraveling a Controlled Nanometer-Scale Expansion of the Vacancy Defects in Graphene by CO2

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Kuang-Jung Hsu

A controlled manipulation of graphene edges and vacancies is desired for molecular separation, sensing and electronics applications. Unfortunately, available etching methods always lead to vacancy nucleation making it challenging to control etching. Herein ...

Wiley-VCH Verlag GmbH2022

Precise Capillary‐Assisted Nanoparticle Assembly in Reusable Templates

Giovanni Boero, Jürgen Brugger, Olivier Martin, Henry Shao-Chi Yu, Hsiang-Chu Wang, Ana Conde Rubio

Capillary-assisted particle assembly (CAPA) in predefined topographical templates is a scalable method for the precise positioning of nanoscale objects on various surfaces. High-resolution CAPA templates are typically fabricated by expensive electron-beam ...

2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Christian Santschi, Olivier Martin, Debdatta Ray, Jeonghyeon Kim, Hsiang-Chu Wang

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, David Brown, Caroline Hain, Thomas Nelis

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

Christian Santschi, Olivier Martin, Banafsheh Abasahl

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resis ...

IOP PUBLISHING LTD2021

Fabrication and applications of AuAg alloy metasurfaces and hybrid metal dielectric nanoantennas

Debdatta Ray

The most prevalent materials used in the field of plasmonics are Au and Ag. However, for the past few years, the plasmonic community has also been looking for alternative materials that have lower losses than Au and higher stability than Ag. This thesis is ...

EPFL2021

Shining Diamond: from Micro- and Nano-Engineering to Quantum Photonics

Sichen Mi

The discovery of room-temperature single photon emission from color centers in diamond has in recent years boosted research interest in this renowned material in photonics and quantum community and beyond. Following understanding some basic principles of h ...

EPFL2021

Smart Slit Assembly Employing Continuously Tunable MEMS Shutter

Benedikt Guldimann, Niels Quack, Gergely Huszka, Hamed Sattari, Anton Lagosh

We present the concept and detailed design of a Smart Slit Assembly for next generation spectrometers, and we experimentally demonstrate operation of an individual 221 mu m x 111 mu m smart slit channel employing a MEMS actuated shutter to continuously mod ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Femtosecond laser-based optomechanical processes for permanent and high-precision fine alignment of optical systems

Saood Ibni Nazir

Miniaturization has been at the forefront of scientific research in the past decade covering diverse areas such as electronics, mechanics, and optics. While 'small is beautiful' may be a vast generalization, the true benefits of miniaturization are especia ...

EPFL2021

Nanopillars Enabling III-V Integration on Si (100) and (111)

Lucas Güniat

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

EPFL2021

Development of microdevices for the in-plane thermoelectric characterization of deposited films

Stefano Mischler

Measuring the thermoelectric transport properties of a material is a prerequisite to determining its usefulness for application in waste heat recovery or cooling and the basis for devising improvement strategies. While well-established characterization met ...

ELSEVIER2021

Systematic design of millisecond gasification reactor for the incorporation of gas-sieving nanopores in single-layer graphene

Kumar Varoon Agrawal, Shiqi Huang, Luis Francisco Villalobos Vazquez de la Parra, Shaoxian Li, Kuang-Jung Hsu

Etching an ensemble of vacancy defects (nanopores) in single-layer graphene (SLG) to obtain a high density of nanopores with an effective size that enables high-performance gas sieving is challenging. This is because nanopore nucleation and expansion are u ...

2021