Publications associées à Experimental investigation on the bending response of reuse-ready timber slabs – The Pixel Slab System

Short-term behavior of glass fiber-polymer composite bending-active elastica beam under service load application

Thomas Keller, Landolf-Giosef-Anastasios Rhode-Barbarigos, Tara Habibi

Bending-active elastica beam is a structural configuration that is based on the elastic deformation of an initially straight beam. This deformation occurs when horizontal displacements are applied to a sliding support, causing the beam to bend into an arch ...

2024

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Maléna Bastien Masse, Numa Joy Bertola, Célia Marine Küpfer, Corentin Jean Dominique Fivet

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Rising from rubble - Leveraging existing construction tools for upcycling concrete waste into slender walls

Katrin Beyer, Maxence Grangeot, Corentin Jean Dominique Fivet, Qianqing Wang, Stefana Parascho

In this paper, we present a new method for upcycling concrete rubble waste into slender walls through the lightweight digital augmentation of mainstream construction machines. By using such method, the environmental impact of concrete construction and demo ...

Springer2024

RE:SLAB — a load bearing system for open-ended component reuse in building structures

Dario Redaelli, Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos

The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...

2024

A Reuse-Ready Timber Slab-and-Column System for Modular Building Structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Alex-Manuel Muresan, Jonas Warmuth, Edisson Xavier Estrella Arcos

The construction industry is a significant contributor to resource consumption and waste generation. To address this issue, component reuse has been proposed as a way to prevent valuable building elements from being discarded and avoid producing new ones. ...

Curran Associates, Inc.2023

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

2023

BamX: Rethinking Deployability in Architecture through Weaving

Mark Pauly, Yingying Ren, Tian Chen, Seiichi Eduardo Suzuki Erazo, Stefana Parascho

Deployable gridshells are a class of planar-to-spatial structures that achievea 3D curved geometry by inducing bending on a flat grid of elastic beams. However, theslender nature of these beams often conflicts with the structure’s load-bearing capacity.To ...

De Gruyter2023

Reusability Assessment of Obsolete Reinforced Concrete Structural Components

Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes, Corentin Jean Dominique Fivet

The production of concrete, the most widely used construction material, detrimentally affects the environment. Obsolete reinforced concrete (RC) load-bearing structures, even when still in good condition, are today prematurely crushed and landfilled or rec ...

Springer2023

Circularity by stock in Sri Lanka: Economic necessity meets urban fabric renovation

Paolo Tombesi, Milinda Pathiraja

Persistent fiscal and political mismanagement, together with the financial pressures of the COVID-19 pandemic, have driven Sri Lanka into a social and economic crisis triggering a decrease in national foreign exchange reserves, an inability to purchase vit ...

FRONTIERS MEDIA SA2023

Steel Pipes and Global Networks: The Influence of Dalmine S.p.A in Shaping Resource Extraction Infrastructures

Anna Karla De Almeida Milani

Pipelines for extracting oil, gas, water, and supporting energy systems are part of the infrastructure of extractive sites, especially marked in countries with less urbanized areas. Throughout the twentieth century, such regions were influenced by economic ...

2023

Circular economy digital market solutions for reuse in the European construction sector

Martin Fröhlich, Corentin Jean Dominique Fivet, Maria Sivers

Focusing on the cross-matching supply and demand for reused building components and related services, the paper analyses existing Digital Reuse Market Solutions (DRMS) in the European construction sector. A collection of 746 DRMS is built from major online ...

2022

Environmental and economic analysis of new construction techniques reusing existing concrete elements: two case studies

Maléna Bastien Masse, Célia Marine Küpfer, Julie Rachel Devènes, Corentin Jean Dominique Fivet

As the most widely used construction material worldwide, concrete is the main cause of greenhouse gas emissions, material depletion, and waste generation by the construction industry. Typically, concrete waste is crushed and, at best, reclaimed into recycl ...

2022

Towards sufficiency in housing: Agent-based model and transition scenarios

Margarita Agriantoni

Research problem: Housing is responsible for a considerable part of global resource consumption. In Switzerland, it accounts for almost one third of the country's CO2 emissions and half of the total energy demand. Thus, housing plays an important role in t ...

EPFL2022

Strategies for a Circular Economy in the Construction and Demolition Sector: Identifying the Factors Affecting the Recommendation of Recycled Concrete

Claudia Rebeca Binder Signer, Valeria Superti, Cynthia Houmani, Ivo Philippe Baur, Ralph Hansmann

With increasing urbanisation, new approaches such as the Circular Economy (CE) are needed to reduce resource consumption. In Switzerland, Construction & Demolition (C&D) waste accounts for the largest portion of waste (84%). Beyond limiting the depletion o ...

2021

Upcycling Space Structures (Preface to special issue)

Olivier Baverel, Corentin Jean Dominique Fivet

The construction industry’s contribution to the deterioration of Earth’s ecosystem is huge. 11% of all anthropic greenhouse gas emissions worldwide are due to the construction, demolition, and transformation of buildings and infrastructure. Construction an ...

2021

Study on Mechanical Performance of Prestressed UHPFRC U-Beam Bridges

Eugen Brühwiler

The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...

2021

Web buckling mechanism of pultruded GFRP bridge deck profiles subjected to concentrated load

Congzhe Wang, Yuqing Liu, Yun Sun

The web's local buckling is a major failure type of pultruded glass fiber-reinforced polymer (GFRP) bridge deck subjected to concentrated wheel loads. Three kinds of external actions-that is, in-plane shear force, local compressive force and bending moment ...

ELSEVIER SCIENCE INC2021

Scrutinizing the Circular Economy concept applied at the urban level: A contribution based on the analysis of urban circularity indicators, the categorization of Circular Economy interventions, and the identification of factors fostering the adoption of circular innovation

Valeria Superti

Problem. Our current economic systems are deemed unsustainable. Although a global issue, the objective of living in a sustainable society is increasingly an urban challenge, as a rising 50% of the world's population currently dwell in cities. To secure a b ...

EPFL2021

Unraveling how the concept of circularity relates to sustainability: An indicator-based meta-analysis applied at the urban scale

Claudia Rebeca Binder Signer, Valeria Superti, Albert Merino

Cities account for 75% of resource consumption and 80% of CO2 emissions. With rising urbanization, achieving urban sustainability becomes crucial. The Circular Economy (CE) concept has been proposed to reduce resource consumption, although its link to sust ...

2021

RC U-shaped walls subjected to in-plane, diagonal, and torsional loading: New experimental findings

Katrin Beyer, Ryan Hoult

Although reinforced concrete U-shaped walls are popular in construction practice internationally, there is a paucity of experimental research investigating the seismic performance of such salient elements. The present paper summarizes an experimental campa ...

2021