Publications associées à Control of cavity lifetime of 1.5 mu m wafer-fused VCSELs by digital mirror trimming

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

Metasurface-stabilized optical microcavities

Ileana-Cristina Benea-Chelmus

Cavities concentrate light and enhance its interaction with matter. Confining to microscopic volumes is necessary for many applications but space constraints in such cavities limit the design freedom. Here we demonstrate stable optical microcavities by cou ...

Nature Portfolio2023

Fab-to-fab and run-to-run variability in 130 nm and 65 nm CMOS technologies exposed to ultra-high TID

Jean-Michel Sallese, Adil Koukab, Stefano Michelis, Gennaro Termo

The discovery of a large fab-to-fab variability in the TID response of the CMOS technologies used in the design of ASICs for the particle detectors of the HL-LHC triggered a monitoring effort to verify the consistency of the CMOS production process over ti ...

IOP Publishing Ltd2023

Nonlinear Integrated Photonics for Ranging Applications

Anton Lukashchuk

This thesis explores the application of recent advances in integrated photonics to the field of light detection and ranging (LiDAR). The progress in photonic integration allows for unprecedented levels of light manipulation on micrometer scales through the ...

EPFL2023

Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview

Elison de Nazareth Matioli

With the increase in penetration of power electronic converters in the power systems, a demand for overcurrent/ overloading capability has risen for the fault clearance duration. This article gives an overview of the limiting factors and the recent technol ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Low-noise frequency-agile photonic integrated lasers for coherent ranging

Rui Ning Wang, Tobias Kippenberg, Junqiu Liu, Wenle Weng, Andrey Voloshin, Jijun He, Anat Siddharth, Viacheslav Snigirev, Vladimir Shadymov

Stable and tunable integrated lasers are fundamental building blocks for applications from spectroscopy to imaging and communication. Here the authors present a narrow linewidth hybrid photonic integrated laser with low frequency noise and fast linear wave ...

Nature Portfolio2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Alexandre Masserey, Eric Boillat, Bastian Meylan

Laser polishing (LP) is a process that allows a significant reduction of the surface roughness of a metal workpiece via re-melting a shallow layer of material. However, the practical use of LP is limited due to the difficulty of satisfying the high surface ...

MDPI2022

Smart Slit Assembly Employing Continuously Tunable MEMS Shutter

Benedikt Guldimann, Niels Quack, Gergely Huszka, Hamed Sattari, Anton Lagosh

We present the concept and detailed design of a Smart Slit Assembly for next generation spectrometers, and we experimentally demonstrate operation of an individual 221 mu m x 111 mu m smart slit channel employing a MEMS actuated shutter to continuously mod ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Fabrication of Single-Crystalline InSb-on-Insulator by Rapid Melt Growth

Anna Fontcuberta i Morral, Nicholas Paul Morgan, Heera Menon

InSb has the smallest bandgap and highest electron mobility among III-V semiconductors and is widely used for photodetectors and high-frequency electronic applications. Integration of InSb directly on Si would drastically reduce the fabrication cost and en ...

Wiley2021

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Samuel Rosset, Herbert Shea, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Mems Shutter Based Variable Optical Attenuator Integrated With Large Core Multimode Rectangular Waveguides

Benedikt Guldimann, Niels Quack, Gergely Huszka, Hamed Sattari, Anton Lagosh

We present the concept and design, and we report on the experimental performance of a broadband Variable Optical Attenuator (VOA) for integration with large-core rectangular multimode waveguides. Operation of an individual 221 mu m x 111 mu m optical waveg ...

IEEE2021

Microwave-to-Optical Transduction with Gallium Phosphide Electro-Optomechanical Devices

Simon Benjamin Klaus Hönl

Quantum computing is one of the great scientific challenges of the 21st century. Small-scale systems today promise to surpass classical computers in the coming years and to enable the solution of classically intractable computational tasks in the fields of ...

EPFL2021

Exploring nonlinearities in multimode optical fibers for lasers and computing

Ugur Tegin

Multimode optical fibers are the backbone of telecommunication and medical imaging. When light with high intensity travels through a multimode fiber, photons and matter start to interact and propa-gation becomes nonlinear. The nonlinear propagation of ligh ...

EPFL2021

Smooth GaN membranes by polarization-assisted electrochemical etching

Jean-François Carlin, Nicolas Grandjean, Joachim Armand Simonne Ciers

III-nitride membranes offer promising perspectives and improved device designs in photonics, electronics, and optomechanics. However, the removal of the growth substrate often leads to a rough membrane surface, which increases scattering losses in optical ...

AMER INST PHYSICS2021

Development of a Data Concentrator ASIC for the High Luminosity upgrade of the CMS Outer Tracker detector with tracking trigger

Simone Scarfì

With the increasing capabilities of the microelectronics technology, future particle detectors in high energy physics will be able to yield high-level features that are not only simple geometrical positions or energy measurement in the silicon sensors used ...

EPFL2021

Integration of MEMS in Silicon Photonics

Alain Yuji Takabayashi

Like integrated electronics, integrated photonics such as Silicon Photonics benefit from increased device-density on a single chip. Silicon is an excellent material for integrated photonics because its high refractive index allows devices to be made small, ...

EPFL2021