Publications associées à Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023

Appropriations and Uses of Travel Time

Ludy Juliana González Villamizar

Time has always been a central factor in understanding the challenges of daily mobility. For a long time, and still today, methods of economic evaluation of transport projects have monetized time savings so that they can be included in the cost–benefit ana ...

ISTE Wiley2023

Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview

Elison de Nazareth Matioli

With the increase in penetration of power electronic converters in the power systems, a demand for overcurrent/ overloading capability has risen for the fault clearance duration. This article gives an overview of the limiting factors and the recent technol ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Reuse of Load-Bearing Timber Elements - Case Study of a Lookout Tower in Lausanne, Switzerland

Julius Natterer, Benoît Pascal Kälin, Corentin Jean Dominique Fivet, Jonas Warmuth, Edisson Xavier Estrella Arcos

The construction industry is jeopardizing Earth’s environment; current mitigation efforts do not suffice; and additional sustainable strategies are required. One such strategy consists of reusing structural building elements over multiple service lives. In ...

Curran Associates, Inc.2023

A Collaborative Workflow to Automate the Design, Analysis, and Construction of Integrally-Attached Timber Plate Structures

Pierre Latteur, Yves Weinand, Aryan Rezaei Rad, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper introduces a computational framework that fosters collaboration between architects, engineers, and contractors by bridging the gap between architectural design, structural analysis, and digital construction. The present research is oriented towa ...

CAADRIA2022

Cockroach: an open-source tool for point cloud processing in cad

Yves Weinand, Julien Gamerro, Andrea Settimi, Petras Vestartas

In the architecture, engineering and construction (AEC) sector, the use of point cloud data is not a novelty. Usually employed to retrieve data for inspecting construction sites or retrofitting pre-existing buildings, sensors like LiDAR cameras have been k ...

Association for Computer-Aided Architectural Design Research in Asia (CAADRIA)2022

Structural design methodology in Integrally-Attached Timber Plate structures

Aryan Rezaei Rad, Petras Vestartas

The immediate application of research discoveries requires a global and exact understanding of the structure under consideration. To gain insight into the complex behavior of structures, numerical simulations are carried out in parallel to physical experim ...

Routledge, Taylor & Francis Group2021

An integrated design tool for timber plate structures to generate joints geometry, fabrication toolpath, and robot trajectories

Pierre Latteur, Yves Weinand, Nicolas Henry Pierre Louis Rogeau

This paper presents an integrated design tool for structures composed of engineered timber panels that are connected by traditional wood joints. Recent advances in computational architecture have permitted to automate the fabrication and assembly of such s ...

2021

Design of Integrally-Attached Timber Plate Structures

Yves Weinand

Design of Integrally-Attached Timber Plate Structures outlines a new design methodology for digitally fabricated spatial timber plate structures, presented with examples from recent construction projects. It proposes an innovative and sustainable design me ...

Routledge, Taylor & Francis Group, London, 20222021

Design-to-Fabrication Workflow for Raw-Sawn-Timber using Joinery Solver

Petras Vestartas

Currently, the Swiss timber industry in mountain areas largely exports unprocessed lumber and imports finished timber products due to the lack of digital tools. By using new digital design-to-production workflows, it is possible to investigate new building ...

EPFL2021

Upcycling Space Structures (Preface to special issue)

Olivier Baverel, Corentin Jean Dominique Fivet

The construction industry’s contribution to the deterioration of Earth’s ecosystem is huge. 11% of all anthropic greenhouse gas emissions worldwide are due to the construction, demolition, and transformation of buildings and infrastructure. Construction an ...

2021

Transformations silencieuses : étude sur l'architecture alpine

Patrick Giromini

This thesis addresses the question of abandonment in architecture, not in its negative sense of desertion, but as a possibility offered to buildings which have lost their original purpose, which is to say those buildings from social and economic contexts w ...

EPFL2021

Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections

Julien Gamerro

Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...

EPFL2020

Experimental investigations on the load-carrying capacity of digitally produced wood-wood connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

The rise of digital fabrication has increased the use of wood-wood connections inspired by traditional carpentry in modern timber constructions. With recent developments on standard construction systems, the mechanical behavior of such joints for in-plane ...

2020

Joinery Solver for Whole Timber Structures

Yves Weinand, Petras Vestartas

This paper presents a digital joinery generation method for whole-timber structures using wood-wood connections. The research is based on a collaboration with a local timber company located in a mountain area [1]. In this context, there is a need to explor ...

2020

The SONATA data format for efficient description of large-scale network models

James Gonzalo King, Juan Bautista Hernando Vieites, Eilif Benjamin Muller, Jean-Denis Georges Emile Courcol, Werner Alfons Hilda Van Geit, Michael Emiel Gevaert, Judit Planas Carbonell, Adrien Michel Achille Devresse

Increasing availability of comprehensive experimental datasets and of high-performance computing resources are driving rapid growth in scale, complexity, and biological realism of computational models in neuroscience. To support construction and simulation ...

2020

A Calculation Method for Interconnected Timber Elements Using Wood-Wood Connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

Wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners in timber constructions. Currently, they can be manufactured and implemented more efficiently thanks to digital fabrication techniques. In addition, with th ...

2020

Characterization of mortar-timber and timber-timber cyclic friction in timber floor connections of masonry buildings

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

The seismic performance of buildings depends critically on the stiffness and strength of storey diaphragms. Whilst for modern reinforced concrete or steel structures the connection between floors and lateral resisting members is often assumed as monolithic ...

SPRINGER2020

Modelling Workflow for Segmented Timber Shells using Wood-wood Connections

Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau

This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...

Springer2019

New perspectives for design of lightweight structures by using textile reinforced concrete

Aurelio Muttoni, Miguel Fernández Ruiz, Patrick Lorenzo Valeri

Nowadays, reinforced concrete (RC) is one of the most widely spread construction materials: allowing to build robust and durable structures. Traditionally, due to cover requirements of the reinforcement and to casting and vibration needs, it has yet been a ...

2019