Publications associées à Exploring the inner workings of the clove hitch knot

Modeling friction and wear using an adaptive discrete-continuum coupling

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Capsizing due to friction-induced twist in the failure of stopper knots

Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns

We investigate the failure mechanism of stopper knots, with a particular focus on the figure -8 knot as a representative example. Stopper knots are widely used in climbing, sailing, racket stringing, and sewing to maintain tension in ropes, strings, or thr ...

Elsevier2024

A method and system for optimizing design, implantation, and stimulation protocols of electrodes stimulating the nervous system

Silvestro Micera, Simone Romeni

A method for optimizing at least one of a geometry, an implantation procedure, and/or stimulation protocol of one or more electrodes for an electrical stimulation of a target structure in a nervous system of a living being by a computer device, the method ...

2024

Strain-based analysis on the influence of local undercut geometry on fatigue crack initiation life

Alain Nussbaumer, Heikki Tapani Remes, Abinab Niraula

The local undercut defects at the weld toe provide a potential initiation site for fatigue cracks and significantly impact the structure's fatigue strength. The influence of continuous undercut depth on fatigue performance is widely studied, but the resear ...

2024

FENNECS: a novel particle-in-cell code for simulating the formation of magnetized non-neutral plasmas trapped by electrodes of complex geometries

Stefano Alberti, Jean-Philippe Hogge, Joaquim Loizu Cisquella, Jérémy Genoud, Guillaume Michel Le Bars, Francesco Romano

This paper presents the new 2D electrostatic particle -in -cell code FENNECS developed to study the formation of magnetized non -neutral plasmas in geometries with azimuthal symmetry. This code has been developed in the domain of gyrotron electron gun desi ...

2024

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Paul Johanns

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

EPFL2023

Computational Exploration of Multistable Elastic Knots

Mark Pauly, Michele Vidulis, Yingying Ren

We present an algorithmic approach to discover, study, and design multistable elastic knots. Elastic knots are physical realizations of closed curves embedded in 3-space. When endowed with the material thickness and bending resistance of a physical wire, t ...

2023

The strength of surgical knots involves a critical interplay between friction and elastoplasticity

Paul Grandgeorge, Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Changyeob Baek

Knots are the weakest link in surgical sutures, serving as mechanical ligatures between filaments. Exceeding their safe operational limits can cause fatal complications. The empirical nature of present guidelines calls for a predictive understanding of the ...

AMER ASSOC ADVANCEMENT SCIENCE2023

T-5 configurations and hyperbolic systems

Carl Johan Peter Johansson, Riccardo Tione

In this paper, we study the rank-one convex hull of a differential inclusion associated to entropy solutions of a hyperbolic system of conservation laws. This was introduced in [B. Kirchheim, S. Muller and V. S(sic)ver & aacute;k, Studying Nonlinear PDE by ...

WORLD SCIENTIFIC PUBL CO PTE LTD2023

A review of materials used in tomographic volumetric additive manufacturing

Christophe Moser, Jorge Andres Madrid Wolff, Riccardo Rizzo

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light pat ...

SPRINGER HEIDELBERG2023

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Nicolas Blondiaux, Elias Sebastian Klauser, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Lisa Salamin, Florent Alexandre Boudoire

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Reduced order modelling of nonaffine problems on parameterized NURBS multipatch geometries

Annalisa Buffa, Pablo Antolin Sanchez, Margarita Chasapi

This contribution explores the combined capabilities of reduced basis methods and IsoGeometric Analysis (IGA) in the context of parameterized partial differential equations. The introduction of IGA enables a unified simulation framework based on a single g ...

2022

Conjugate heat transfer in isolated granular clusters with interstitial fluid using lattice Boltzmann method

Mehrdad Kiani Oshtorjani

The conjugate heat transfer in mixtures of a fluid and single granular clusters is studied in this paper using a novel lattice Boltzmann method (LBM) programmed for parallel computation on the graphics processing unit (GPU). The LBM is validated for heat c ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Modeling the origins of adhesive wear across scales

Son-Jonathan Pham-Ba

Friction and wear occur at every interface between solid materials. In the design of mechanical devices, it is desirable to be able to quantify and control the amount of friction and wear, as well as predict their evolution with time. ``Tribology'' is the ...

EPFL2022

Planar Equilibria of an Elastic Rod Wrapped Around a Circular Capstan

Harmeet Singh

We present a study on planar equilibria of a terminally loaded elastic rod wrapped around a rigid circular capstan. Both frictionless and frictional contact between the rod and the capstan are considered. We identify three cases of frictionless contact - n ...

SPRINGER2022

Cross verified independent measurements of correlated bubble property distributions as part of the scale-up of a catalytic bubbling fluidized bed reactor

Philipp Fedor Riechmann

Methanation can be applied as part of a Power-to-Gas (PtG) concept to store renewable electricity. Using a catalytic bubbling fluidized bed (BFB) methanation reactor allows a flexible and economic operation. Properties of bubbles rising through the fluidiz ...

EPFL2022

An elastic rod in frictional contact with a rigid cylinder

Paul Grandgeorge, Pedro Miguel Nunes Pereira de Almeida Reis, Tomohiko Sano

We investigate the load transmission along an elastic rod of finite cross-section in contact with a rigid cylinder, as system often referred to as the generalized capstan problem. In the presence of friction, the idealized classic capstan equation predicts ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Bragg edge tomography characterization of additively manufactured 316L steel

Christian Leinenbach, Roland Logé, Nikola Kalentics, Efthymios Polatidis, Markus Strobl

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Stabilized isogeometric discretizations on trimmed and union geometries, and weak imposition of the boundary conditions for the Darcy flow

Riccardo Puppi

Modern manufacturing engineering is based on a ``design-through-analysis'' workflow. According to this paradigm, a prototype is first designed with Computer-aided-design (CAD) software and then finalized by simulating its physical behavior, which usually i ...

EPFL2022

Adhesive wear with a coarse-grained discrete element model

Jean-François Molinari, Son-Jonathan Pham-Ba

The use of molecular dynamics (MD) simulations has led to promising results to unravel the atomistic origins of adhesive wear, and in particular for the onset of wear at nanoscale surface asperities. However, MD simulations come with a high computational c ...

ELSEVIER SCIENCE SA2022