Publications associées à Cold neutron diffraction contrast tomography of polycrystalline material

High brightness neutron source optimized for very high pulsed magnetic field experiments

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

High-Resolution Modeling Without Computation Slowdown for PETALE in CROCUS

Andreas Pautz, Vincent Pierre Lamirand, Thomas Jean-François Ligonnet, Axel Guy Marie Laureau

In a collaboration between Ecole Polytechnique Fédérale de Lausanne (EPFL) and CEA, in the fall of 2020, the experimental Programme d’Étude en Transmission de l’Acier Lourd et ses Eléments (PETALE) was successfully carried out in the CROCUS reactor of EPFL ...

2024

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino, Alberto Ferro

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Magnetic structure and magnetoelectric properties of the spin-flop phase in LiFePO4

Sofie Janas, Ellen Fogh, Paola Caterina Forino

We investigate the magnetic structure and magnetoelectric(ME) effect in the high -field phase of the antiferromagnet LiFePO 4 above the critical field of 31 T. A neutron diffraction study in pulsed magnetic fields reveals the propagation vector to be q = 0 ...

Amer Physical Soc2024

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Matteo Vallar

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

IOP Publishing Ltd2024

Measuring electrical properties in semiconductor devices by pixelated STEM and off-axis electron holography (or convergent beams vs. plane waves)

Victor Carle Adrien Boureau

We demonstrate the use of both pixelated differential phase contrast (DPC) scanning transmission electron microscopy (STEM) and off-axis electron holography (EH) for the measurement of electric fields and assess the advantages and limitations of each techn ...

Pergamon-Elsevier Science Ltd2024

Weyl metallic state induced by helical magnetic order

Henrik Moodysson Rønnow, Ivica Zivkovic, Jan Hugo Dil, Jian Rui Soh, Xupeng Yang

In the rapidly expanding field of topological materials there is growing interest in systems whose topological electronic band features can be induced or controlled by magnetism. Magnetic Weyl semimetals, which contain linear band crossings near the Fermi ...

Nature Portfolio2024

Anomalous Hall effect and magnetic structure of the topological semimetal (Mn0.78Fe0.22)3Ge

Jan Persson, Jian Rui Soh

Me3+8Ge, being a Weyl semimetal, shows a large anomalous Hall effect (AHE), which decreases slowly with an increase in 8 from 0.1 to 0.4. However, AHE in this compound remains significantly large in the whole range of 8 because of the robust nature of the ...

AMER PHYSICAL SOC2023

Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy

Cyril Cayron, Roland Logé, Aryan Rezaei Rad

Two severe plastic deformation (SPD) techniques of simple shear extrusion (SSE) and equal channel angular pressing (ECAP) were employed to process an extruded Mg -6Gd -3Y -1.5Ag (wt%) alloy at 553 K for 1, 2, 4 and 6 passes. The microstructural evolutions ...

KEAI PUBLISHING LTD2023

Gamma-Blind Fast Neutron Detection for Spent Nuclear Fuel Characterization

Alexander Wolfertz

In this thesis, the development and testing of a system for measuring the axial distribution of fast neutron emission of spent nuclear fuel rods is presented. Emphasis is placed on the novel fast neutron detector used which can reliably work in extremely h ...

EPFL2023

Evaluation of neutron dose rates at the TCV tokamak facility

Patrick Blanchard, Henri Weisen, Matteo Vallar

A detailed MCNP neutronics model of the building housing the TCV tokamak has been developed. Predicted dose rates have been compared to neutron dose measurements at 12 locations in the building obtained during neutral beam injection into TCV plasmas. This ...

2023

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

Christian Brandl, Carolina Baruffi

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Pergamon-Elsevier Science Ltd2023

Magnetic structure of the two-dimensional XY antiferromagnet Sr2CoSi2O7 studied using single-crystal neutron diffraction

Bálint Náfrádi

We report a combined polarized and unpolarized neutron diffraction study on a multiferroic Sr2CoSi2O7 (SCSO) single crystal below and above the antiferromagnetic ordering temperature TN = 6.5 K. Unpolarized neutron diffraction measurements at 15 K confirm ...

AMER PHYSICAL SOC2023

Effect of Co-Substitution on Hydrogen Absorption and Desorption Reactions of YMgNi4-Based Alloys

Loris Giovanni Lombardo, Andreas Züttel, Wen Luo, Heena Yang

YMgNi4-based alloys exhibit reversible hydrogen absorption and desorption reactions at near room temperature. Here, we report that Co-substituted YMgNi4-based alloys exhibited higher hydrogen contents and lower hydrogen absorption and desorption reaction p ...

AMER CHEMICAL SOC2022

Real space and reciprocal space investigations of the spin dynamics in skyrmion-hosting materials

Le Yu

Magnetic skyrmions are whirl-like spin configurations with particle-like properties protected by non-trivial topology. Due to their unique spin structures and dynamical properties, they have attracted tremendous interests over the past decade, from fundame ...

EPFL2022

Bragg edge tomography characterization of additively manufactured 316L steel

Christian Leinenbach, Roland Logé, Nikola Kalentics, Efthymios Polatidis, Markus Strobl

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Investigating field-induced magnetic order in Han purple by neutron scattering up to 25.9 T

Philippe Heller, Frédéric Mila, Bruce Normand, Nicolas Laflorencie

BaCuSi2O6 is a quasi-two-dimensional (2D) quantum antiferromagnet containing three different types of stacked, square-lattice bilayer hosting spin-1/2 dimers. Although this compound has been studied extensively over the last two decades, the critical appli ...

2022

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

Christian Leinenbach, Roland Logé, Efthymios Polatidis, Markus Strobl

Laser-powder bed fusion (L-PBF) has gained significant research interest, not only for its profound advantage of producing near-net shape complex geometries of metallic parts, but also for the possibility of producing tailored microstructures. Here we expl ...

ELSEVIER SCI LTD2022

High-Resolution Photoemission Study of Neutron-Induced Defects in Amorphous Hydrogenated Silicon Devices

Sylvain Dunand, Nicolas Würsch, Giulia Rossi, Matthew James Large

In this paper, by means of high-resolution photoemission, soft X-ray absorption and atomic force microscopy, we investigate, for the first time, the mechanisms of damaging, induced by neutron source, and recovering (after annealing) of p-i-n detector devic ...

MDPI2022

Miniature and Minimalistic Neutron Detectors for Online High-Resolution Experiments in the Zero-Power Reactor CROCUS

Fanny Vitullo

The continuous strive for more efficient and reliable nuclear power plants is leading to increasing complexity in the design and operations of reactors. As a consequence, comprehensive analyses are required to assess the reactor's safety during normal and ...

EPFL2022