Publications associées à Nonreciprocal reconfigurable microwave optomechanical circuit

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Jalaledin Tayebpour, Amir Jafargholi

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

The 2024 Magnonics Roadmap

Dirk Grundler, Benedetta Flebus, Ping Che, Wei Zhang, Thomas Yu, Qi Wang

Magnonics is a research field that has gained an increasing interest in both the fundamental and applied sciences in recent years. This field aims to explore and functionalize collective spin excitations in magnetically ordered materials for modern informa ...

2024

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

Parametric Wavelength Conversion in Waveguiding Structures: Efficiency, Bandwidth and Polarization

Arman Ayan

Photonics integrated circuits are a promising solution for the growing demands of data transmission and future system-on-chip technologies. Within this context, nonlinear optical interactions offer unique opportunities for all-optical processing, sampling, ...

EPFL2024

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Resonators with tailored optical path by cascaded-mode conversions

Ileana-Cristina Benea-Chelmus, Marco Piccardo

Optical resonators enable the generation, manipulation, and storage of electromagnetic waves. The physics underlying their operation is determined by the interference of electromagnetic waves, giving rise to the resonance spectrum. This mechanism causes th ...

Nature Portfolio2023

Nanomechanical resonators with low dissipation for quantum optomechanics

Alberto Beccari

Fields of technology as diverse as microwave filter construction, characterization of material interfaces with atomic precision, and detection of gravitational waves from astronomical sources employ mechanical resonators at their core. The utility of mecha ...

EPFL2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

Time-Domain Integration of Broadband Terahertz Pulses via Tapered Two-Wire Waveguide

Alessandro Tomasino

In this work, we report on the implementation of a time-domain integrator device operating on arbitrary broadband Terahertz (THz) pulses. This analog signal-processing functionality is implemented by employing a two-wire waveguide (TWWG) variant, based on ...

IEEE2023

Waveguide amplifier and waveguide amplifier fabrication method

Tobias Kippenberg, Xinru Ji, Yang Liu, Zheru Qiu

The present invention concerns a waveguide amplifier comprising: - at least one embedding cladding material or layer, and - at least one rare-earth ion implanted silicon nitride material or layer embedded in the at least one embedding cladding material or ...

2023

Numerical and experimental investigations of a microwave interferometer for the negative ion source SPIDER

Ivo Furno, Rémy Jacquier, Riccardo Agnello

The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed inhibit the negativ ...

IOP Publishing Ltd2023

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

Terahertz waveform synthesis in integrated thin-film lithium niobate platform

Jérôme Faist, Ileana-Cristina Benea-Chelmus, Francesca Fabiana Settembrini

Bridging the "terahertz gap" relies upon synthesizing arbitrary waveforms in the terahertz domain enabling applications that require both narrow band sources for sensing and few-cycle drives for classical and quantum objects. However, realization of custom ...

Nature Portfolio2023

4-Port Microstrip planar resonator for multiband microwave material characterization applications

Anja Skrivervik, Sujith Raman

Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...

IEEE2022

Inflight Microwave Drying Process of Micro-droplets for High Resolution 3D printing

Kwanghoon Choi

A new Additive-Manufacturing (AM) or 3D printing concept is proposed to improve the printing resolution for metal additive manufacturing in the frame of the SFA-AM project, Powder Focusing for Beam-Induced Laser 3D Printing. The project aims to transport s ...

EPFL2022

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, David Brown, Caroline Hain, Thomas Nelis

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

Ultra-Small Bent Meta-Waveguide Filters

Maliheh Khatibi Moghaddam, Romain Christophe Rémy Fleury

This paper demonstrates the capability of locally resonant metamaterials (LRMs) for creating compact metallic waveguide E- and H-bends, which are simultaneously working as bandpass filters. For creating these bent meta-filters, we use composite pin-pipe wa ...

IEEE2022

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

Nanoplasma-based Millimiter-wave Modulators on a Single Metal Layer

Elison de Nazareth Matioli, Mohammad Samizadeh Nikooytabalvandani

Fundamental constraints imposing power-frequency trade-offs in conventional electronics have stimulated research on alternative technologies for millimeter-wave and sub-millimeter-wave applications. In this work, we use the picosecond threshold firing of n ...

Institute of Electrical and Electronics Engineers2022