Publications associées à Mechanisms of films and coatings formation from gaseous and liquid precursors with low pressure plasma spray equipment

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

EPFL2024

Nanostructure and Optical Property Tailoring of Zinc Tin Nitride Thin Films through Phenomenological Decoupling: A Pathway to Enhanced Control

Aïcha Hessler-Wyser, Johann Michler, Amit Sharma, Daniele Casari, Caroline Hain, Thomas Nelis

This work addresses the need for precise control of thin film sputtering processes to enable thin film material tailoring on the example of zinc tin nitride (ZTN) thin films deposited via microwave plasma-assisted high power reactive magnetron sputtering ( ...

Amer Chemical Soc2024

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Raffaella Buonsanti, Anna Loiudice, Petru Pasquale Albertini, Ona Segura Lecina, Coline Marie Agathe Boulanger, Philippe Benjamin Green, Mark Adrian Newton, Krishna Kumar, Jari Leemans

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Amer Chemical Soc2024

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Farzaneh Talebkeikhah

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

EPFL2023

Investigations on Caesium Dispersion and Molybdenum Coating on SPIDER Components

Michele Fadone

SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydroge ...

2023

Examination of commercial ceramic coatings for the electrical insulation of Bi-2212 wire

Andrea Testino, Davide Uglietti, Robert Sobota

In the last twenty years, a number of studies have been dedicated to the development of thin ceramic coating for the electrical insulation of Ag-sheathed Bi-2212 wires. Instead of preparing a coating by mixing different compounds in house, this technical n ...

2023

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Caroline Hain

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Polysaccharide Layer-by-Layer Coating for Polyimide-Based Neural Interfaces

Silvestro Micera

Implantable flexible neural interfaces (IfNIs) are capable of directly modulating signals of the central and peripheral nervous system by stimulating or recording the action potential. Despite outstanding results in acute experiments on animals and humans, ...

MDPI2022

Structural and photophysical investigation of single-source evaporation of CsFAPbI(3) and FAPbI(3) perovskite thin films

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Nadja Isabelle Desiree Klipfel, Albertus Adrian Sutanto, Maria Cristina Momblona Rincón

Thermal vacuum deposition is a stimulating technique for upscaling perovskite solar cells. However, the operational complexity of multisource vapor deposition (MSVD) and achieving stoichiometric perovskite layers may impede its implementation. The single-s ...

Royal Society of Chemistry2022

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, David Brown, Caroline Hain, Thomas Nelis

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

Narrowband Optical Coupler Using Fano Interference in First Order Diffraction

Olivier Martin, Benjamin Gallinet, Fabian Michael Lütolf, Giorgio Quaranta

Light coupling in waveguides has been extensively investigated in a variety of contexts, from photonic integrated circuits to biosensing and near-eye displays for augmented reality. Here, narrowband diffraction is reported using a Fano interference effect ...

AMER CHEMICAL SOC2021

Atomic layer deposition of Ni and Ni80Fe20 for tubular spin-wave nanocavities

Maria Carmen Giordano

Magnetic thin films and magnetic nanostructures have become essential components of modern technological applications. Modern branches of magnetisms focus on spin-charge coupling (spintronics) and the collective excitation of spin waves in magnetically ord ...

EPFL2021

Heterogeneous catalyst preparation by liquid-phase atomic layer deposition

Benjamin Pierre Le Monnier

Heterogeneous catalyst preparation has been performed for close to a century but has been rapidly evolving spurred by the evolution in synthetic techniques and growing needs in energy, chemicals and materials. An increasing number of catalyst synthesis str ...

EPFL2020

Gallium-Based Thin Films for Wearable Sensors and Electronic Skins

Laurent Mirko Dejace

Integrated wearable electronics capable of providing biophysical information on complex and dynamic systems have attracted high interest in diverse fields such as healthcare, gaming and robotics. Wearable sensors can create artificial, electronic skins wit ...

EPFL2020

Instability of a thin viscous film flowing under an inclined substrate: steady patterns

Gioele Mariano Nicolò Balestra, François Gallaire, Gaëtan Pierre Clément Lerisson, Pier Giuseppe Ledda

The flow of a thin film coating the underside of an inclined substrate is studied. We measure experimentally spatial growth rates and compare them to the linear stability analysis of a flat film modelled by the lubrication equation. When forced by a statio ...

Cambridge University Press2020

Spectrally Selective Mid-Wave Infrared Detection Using Fabry-Perot Cavity Enhanced Black Phosphorus 2D Photodiodes

Christophe Ballif, Quentin Thomas Jeangros, Wei Yan

Thin two-dimensional (2D) material absorbers have the potential to reduce volume-dependent thermal noise in infrared detectors. However, any reduction in noise must be balanced against lower absorption from the thin layer, which necessitates advanced optic ...

AMER CHEMICAL SOC2020

Experiments and modelling for glow discharge plasmas applied to niobium sputter deposition in superconducting radiofrequency cavities

Thibaut François Hugo Richard

Thin film coatings are ubiquitous in modern daily lives, from the semi-conductor industry to aesthetic applications, and rely on the modification of a given material to enhance its surface properties. At CERN (European Organization for Nuclear Research), t ...

EPFL2019

Coatings with tailored electronic and optical properties for advanced glazing

Olivia Valérie Charlotte Bouvard

Modern envelope glazing relies on nanoscale coatings to meet a range of specific needs. Low emissivity coatings can improve the thermal performance of glazing thanks to a thin metallic film. However, the conductive nature of this layer leads to an attenuat ...

EPFL2019

Atomic Layer Deposition on Dispersed Materials in Liquid Phase by Stoichiometrically Limited Injections

Jeremy Luterbacher, Benjamin Pierre Le Monnier, Frederick Georges Wells, Farzaneh Talebkeikhah

Atomic layer deposition (ALD) is a well‐established vapor‐phase technique for depositing thin films with high conformality and atomically precise control over thickness. Its industrial development has been largely confined to wafers and low‐surface‐area ma ...

Wiley2019