Publications associées à An Effective Pd–Ni2P/C Anode Catalyst for Direct Formic Acid Fuel Cells

Electrochemical devices and computer science: water/thermal management of proton exchange membrane fuel cells and electrolyzers in different scales

The current restrictions on the registration of combustion engines in different countries and the harmful impacts of fossil fuels on the environment and human health have motivated decision-makers to use batteries and/or fuel cells as alternatives for comb ...

EPFL2023

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Jan Van Herle, Zoé Mury, Suhas Nuggehalli Sampathkumar, Khaled Lawand

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

Reversible photo-electrochemical device for solar hydrogen and power generation

Sophia Haussener, Alexandre Dominique M. Cattry, Saurabh Yuvraj Tembhurne, Matthieu Jonin, Mahendra Patel

A reversible photo-electrochemical device operating under concentrated irradiation could offer a stand-alone solution for producing solar fuel (in photo-driven electrolysis mode) and power (in fuel cell mode). This strategy would present the advantage of h ...

2024

In Situ Synthesis of CuxO/N Doped Graphdiyne with Pyridine N Configuration for Ammonia Production via Nitrate Reduction

Sophia Haussener, Roberto Valenza, Jian Li

Electroreduction of nitrate to ammonia provides an interesting pathway for wastewater treatment and valorization. Cu-based catalysts are active for the conversion of NO3− to NO2− but suffer from an inefficient hydrogenation process of NO2−. Herein, CuxO/N- ...

2024

Quantifying mass transport limitations in a microfluidic CO2 electrolyzer with a gas diffusion cathode

Sophia Haussener, Venu Gopal Agarwal

A gas diffusion electrode (GDE) based CO2 electrolyzer shows enhanced CO2 transport to the catalyst surface, significantly increasing current density compared to traditional planar immersed electrodes. A two-dimensional model for the cathode side of a micr ...

2024

Stability and degradation of (oxy)nitride photocatalysts for solar water splitting

Sophia Haussener, Franky Esteban Bedoya Lora

Advancing towards alternative technologies for the sustainable production of hydrogen is a necessity for the successful integration of this potentially green fuel in the future. Photocatalytic and photoelectrochemical water splitting are promising concepts ...

2024

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Michele Morgante

In recent years, many efforts have been made to find alternative renewable energy sources that can ideally replace the use of fossil fuels in all aspects. One of the new emerging energy technologies is the bioelectrochemical system, of which two types are ...

EPFL2024

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Samaneh Daviran

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

EPFL2024

High-throughput parallel testing of ten photoelectrochemical cells for water splitting: case study on the effects of temperature in hematite photoanodes

Sophia Haussener, Isaac Thomas Holmes-Gentle, Roberto Valenza, Franky Esteban Bedoya Lora

High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte inter ...

Royal Soc Chemistry2024

Atomic level insight into irradiation effects in nuclear fuel materials

Shaileyee Bhattacharya

Microstructural evolution during in-pile irradiation, radiation damage effects and fission products behavior in UO2 nuclear fuel are key issues in understanding and for the modeling of the performance as well as safety characteristics of nuclear fuels in t ...

EPFL2024

The design and development of anion exchange membranes for hydrogen fuel cells

Xingyu Wu

Hydrogen fuel cells are an essential component of hydrogen economy, which have been advocated as a major path towards the decarbonization of the energy sector. Within the two main types of low-temperature hydrogen fuel cells, anion-exchange membrane fuel c ...

EPFL2023

Performance evaluation and the implementation of the turbocharger, fuel cell, and battery in Unmanned Aerial Vehicles (UAVs)

Jan Van Herle, Hossein Pourrahmani

The current study evaluates integrating fuel cell technology into the batteries as an alternative for internal combustion engines (ICEs) for Unmanned Aerial Vehicles (UAV). To further improve the performance of the UAV, a turbocharger is also integrated to ...

Elsevier2023

Using Complex Hydrides for Hydrogen Storage and Direct Borohydride Fuel Cells for Electricity Production

Youngdon Ko

Hydrogen storage and utilization are the technologies to achieve carbon-neutral energy systems with renewable energy sources. Among the various materials that have been investigated, complex hydrides are a material exhibiting high gravimetric hydrogen dens ...

EPFL2023

Insights into Electrocatalyst Transformations Studied in Real Time with Electrochemical Liquid-Phase Transmission Electron Microscopy

Vasiliki Tileli, Tzu-Hsien Shen, Robin Pierre Alain Girod

The value of operando and in situ characterization methodologies for understanding electrochemical systems under operation can be inferred from the upsurge of studies that have reported mechanistic insights into electrocatalytic processes based on such mea ...

Amer Chemical Soc2023

Three-dimensional nanoimaging of fuel cell catalyst layers

Vasiliki Tileli, Robin Pierre Alain Girod, Timon Lazaridis

Catalyst layers in proton exchange membrane fuel cells consist of platinum-group-metal nanocatalysts supported on carbon aggregates, forming a porous structure through which an ionomer network percolates. The local structural character of these heterogeneo ...

NATURE PORTFOLIO2023

An Advanced Alkaline Al-Air Fuel Cell Using L-Ascorbic Acid Interface Layer upon Al Anode via Gradient Anti-corrosion

Pengfei Zhang, Manhui Wei

Al metal is considered as an excellent anode material for metal-air fuel cells thanks to the advantages in terms of capacity and energy density. However, the anodic parasitic corrosion has brought great obstacles to the performance breakthrough of Al-air f ...

AMER CHEMICAL SOC2023

Expansion Work Recovery of Hydrogen for a FC-Truck-Tentative Design of an Expansion Machine

Alfred Rufer

Hydrogen powered vehicles use high-pressure reservoirs from which the gas is transferred to the low-pressure fuel-cell via a classical pressure reduction valve. In these systems no expansion work is recovered and the question is addressed of the potential ...

MDPI2023

Decoupling the Contributions of Different Instability Mechanisms to the PEMFC Performance Decay of Non-noble Metal O2-Reduction Catalysts

Vasiliki Tileli, Robin Pierre Alain Girod, Secil Unsal

Non-noble metal catalysts (NNMCs) hold the potential to replace the expensive Pt-based materials currently used to speed up the oxygen reduction reaction (ORR) in proton exchange membrane fuel cell (PEMFC) cathodes, but they feature poor durability that in ...

AMER CHEMICAL SOC2023

Anion Exchange Ionomers Enable Sustained Pure-Water Electrolysis Using Platinum-Group-Metal-Free Electrocatalysts

Xile Hu, Fang Song, Nanjun Chen, Ariana Serban, Yiwei Zheng

Anion exchange membrane water electrolyzer (AEMWE) is a rising technology that offers potential advantages in cost and scalability over proton exchange membrane water electrolyzer (PEMWE) technology. However, AEMWEs that stably operate in pure water still ...

2023

The thermodynamic and life-cycle assessments of a novel charging station for electric vehicles in dynamic and steady-state conditions

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

The current study performs the thermodynamic and life-cycle assessments (LCA) of a novel charging station in two system designs. The goal is to design an efficient charging station for electric vehicles with high efficiencies and low environmental impacts ...

Nature Portfolio2023