Publications associées à A fixed-volume microfluidic mixer realized using multilayer PDMS technology

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Single emulsion drops for photocatalytic water splitting as a membrane-free approach to product separation

Sophia Haussener, Esther Amstad, Swarnava Nandy, Sangram Ashok Savant, Gaia De Angelis

The coevolution of hydrogen and oxygen during photocatalytic water splitting presents a challenge for efficient product separation. Here, we demonstrate membrane-free, drop-based photocatalytic water splitting with inherent product separation and competiti ...

2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Electronic readout of DNA amplification in nanoliter chambers. Strategies towards highly parallel semiconductor-based nucleic acid amplification testing

Saurabh Tomar

Polymerase chain reaction (PCR) has been the most significant driver in the field of nucleic acid testing (NAT) since its invention. Popularized as an abbreviation by the Covid-19 pandemic, PCR-based methods are the gold standard in the field of diagnostic ...

EPFL2023

Hydrogel-Encased Photonic Microspheres with Enhanced Color Saturation and High Suspension Stability

Esther Amstad

Regular arrays of colloidal particles can produce striking structural colors without the need for any chemical pigments. Regular arrays of colloidal particles can be processed into microparticles via emulsion templates for use as structural colorants. Phot ...

Amer Chemical Soc2023

Development of next-generation microfluidic systems for enhanced, faster, and cost-effective immunoassays for tissue diagnostics - Ac electrothermal flow & Acoustofluidics

Muaz Salama Abdelmonem Draz

The application of microfluidics in the field of surface-based assays and more specifically, the spatial molecular profiling of tumor tissues has gained a lot of interest, especially with the increased interest in personalized medicine and targeted therapy ...

EPFL2023

Combination of dielectrophoretic and hydrodynamic traps for the controlled contact between cells or beads and application to adhesion assays

Clémentine Sophie Sarah Lipp

Multicellular organisms require very well organized and finely balanced cell-cell communication, adhesion and coordination to ensure the organisms homeostasis. These functions rely on specialized receptors placed at the cells membrane whose binding to thei ...

EPFL2023

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Arnaud Bertsch, Jürgen Brugger, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

Microfluidic device combining hydrodynamic and dielectrophoretic trapping for the controlled contact between single micro-sized objects and application to adhesion assays

Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp

The understanding of cell-cell and cell-matrix interactions via receptor and ligand binding relies on our ability to study the very first events of their contact. Of particular interest is the interaction between a T cell receptor and its cognate peptide-m ...

ROYAL SOC CHEMISTRY2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Analytic modelling of passive microfluidic mixers

Christophe Lallement, Jean-Michel Sallese

This paper deals with a new analytical model for microfluidic passive mixers. Two common approaches already exist for such a purpose. On the one hand, the resolution of the advection-diffusion-reaction equation (ADRE) is the first one and the closest to ph ...

AMER INST MATHEMATICAL SCIENCES-AIMS2022

Microfluidic systems for in-flow bioanalytes collection

Pierre-Emmanuel Marie Thiriet

Microfluidic is an ensemble of technologies and methods that permits the handling and analysis of minute volumes of samples in short timescales. Since its introduction it revealed a remarkable potential to unveil novel biological mechanisms. The small volu ...

EPFL2022

Piezoelectric suspended microchannel resonators

Damien Maillard

The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level. The systems developed for these purposes consist of piezoelectrica ...

EPFL2022

Polydimethylsiloxane microstructure-induced acoustic streaming for enhanced ultrasonic DNA fragmentation on a microfluidic chip

Thomas Lehnert, Martinus Gijs, Lin Sun

Next-generation sequencing (NGS) is an essential technology for DNA identification in genomic research. DNA fragmentation is a critical step for NGS and doing this on-chip is of great interest for future integrated genomic solutions. Here we demonstrate fa ...

ROYAL SOC CHEMISTRY2022

Inflight Microwave Drying Process of Micro-droplets for High Resolution 3D printing

Kwanghoon Choi

A new Additive-Manufacturing (AM) or 3D printing concept is proposed to improve the printing resolution for metal additive manufacturing in the frame of the SFA-AM project, Powder Focusing for Beam-Induced Laser 3D Printing. The project aims to transport s ...

EPFL2022

Solvent-Free Synthesis and Processing of Conductive Elastomer Composites for Green Dielectric Elastomer Transducers

Frank Nüesch

Stretchable electrodes are more suitable for dielectric elastomer transducers (DET) the closer the mechanical characteristics of the electrodes and elastomer are. Here, a solvent-free synthesis and processing of conductive composites with excellent electri ...

WILEY-V C H VERLAG GMBH2022

Microfluidic Device for Droplet Pairing by Combining Droplet Railing and Floating Trap Arrays

Philippe Renaud, Margaux Catherine Marie Duchamp, George Coukos, Alexandre Harari, Marion Arnaud

Droplet microfluidics are characterized by the generation and manipulation of discrete volumes of solutions, generated with the use of immiscible phases. Those droplets can then be controlled, transported, analyzed or their content modified. In this wide d ...

MDPI2021

Electronic Multi-material Fibers and Textiles: Novel Designs and Applications

Chaoqun Dong

Flexible electronics and particularly soft fibers and textiles are becoming key components in rapidly developing fields such as robotics, health and personal care, sensing, or implantable and wearable devices. Thus far however, the ability to impart soft a ...

EPFL2021

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Reusable support for additive manufacturing

Additive manufacturing (AM) processes such as material extrusion and vat photopolymerization all require supports to print parts with overhang features. These additional supports using the same or different materials are a waste of materials since they nee ...

2021