Publications associées à A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by gamma ' and gamma '' particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical composition have ad ...

MDPI2024

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Elyas Ghafoori, Christian Leinenbach, Irene Ferretto, Mahbod Golrang, Mahshid Memarian

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

First-principles thermodynamics of precipitation in aluminum-containing refractory alloys

Anirudh Raju Natarajan

Materials for high -temperature environments are actively being investigated for deployment in aerospace and nuclear applications. This study uses computational approaches to unravel the crystallography and thermodynamics of a promising class of refractory ...

Pergamon-Elsevier Science Ltd2024

Design for demise applied to spacecraft structural panels and experiments for ClearSpace One platform

Alexandre Achille Looten

With growing awareness of the vulnerability of the near-Earth space region and the anticipated surge in satellite objects, efforts are underway to assess and implement various mitigation strategies. These aim to minimize the impact of space activities and ...

EPFL2024

A Cavity-Microscope for Quantum Simulations with Locally-Controllable All-to-All Interactions

Nick Jacob Sauerwein

This thesis presents the development, construction, and benchmark of an experimental platform that combines cold fermionic 6Li atoms with locally controllable light-matter interactions. To enable local control, a new device, the cavity-microscope, was crea ...

EPFL2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Two-particle Bose-Einstein correlations and their Lévy parameters in PbPb collisions at √sNN=5.02 TeV

Rakesh Chawla, Andrea Rizzi, Matthias Finger, Federica Legger, Matteo Galli, Sun Hee Kim, Jian Zhao, João Miguel das Neves Duarte, Tagir Aushev, Hua Zhang, Alexis Kalogeropoulos, Yixing Chen, Tian Cheng, Ioannis Papadopoulos, Gabriele Grosso, Valérie Scheurer, Meng Xiao, Qian Wang, Michele Bianco, Varun Sharma, Joao Varela, Sourav Sen, Ashish Sharma, Seungkyu Ha, David Vannerom, Csaba Hajdu, Sanjeev Kumar, Sebastiana Gianì, Kun Shi, Abhisek Datta, Siyuan Wang, Anton Petrov, Jian Wang, Yi Zhang, Muhammad Ansar Iqbal, Yong Yang, Xin Sun, Muhammad Ahmad, Donghyun Kim, Matthias Wolf, Anna Mascellani, Paolo Ronchese, , , , , , , , , , , , , , , , , , , , , , , ,

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

This study investigated the origin of the enhanced pseudo-elasticity of additively manufactured vanadium carbide-containing Fe-based shape memory alloys. The aged samples with two different starting microstructures, as-built and solution-treated, showed co ...

Elsevier Science Sa2023

Modelling of metal alloys in realistic conditions with machine learning

Nataliya Lopanitsyna

Computer simulations based on statistical methods have emerged as a powerful tool for studying structure-property relationships at the atomistic level. However, to provide reliable insights into materials in realistic conditions, it is essential to accurat ...

EPFL2023

Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules

Johann Michler, Ashish Sharma, Caroline Hain

In this work, we reviewed the available phase selection rules comprising atomic size and topological aspects, entropies, enthalpies, melting points, valence and itinerant electron concentrations, as well as electronegativity, and validated them using a car ...

ELSEVIER SCI LTD2023

Higher Order Asymptotics: Applications to Satellite Conjunction and Boundary Problems

Soumaya Elkantassi

Higher-order asymptotics provide accurate approximations for use in parametric statistical modelling. In this thesis, we investigate using higher-order approximations in two-specific settings, with a particular emphasis on the tangent exponential model. ...

EPFL2023

Element- and enantiomer-selective visualization of molecular motion in real-time

Majed Chergui, Malte Oppermann, Jérémy Raymond Jean Maurice Rouxel

Ultrafast optical-domain spectroscopies allow to monitor in real time the motion of nuclei in molecules. Achieving element-selectivity had to await the advent of time resolved X-ray spectroscopy, which is now commonly carried at X-ray free electron lasers. ...

Nature Portfolio2023

Epigenome-wide DNA methylation in externalizing behaviours: A review and combined analysis

Maria del Carmen Sandi Perez, Mandy Meijer

DNA methylation (DNAm) is one of the most frequently studied epigenetic mechanisms facilitating the interplay of genomic and environmental factors, which can contribute to externalizing behaviours and related psychiatric disorders. Previous epigenome-wide ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Dated: Guidelines for Creating Synthetic Datasets for Engineering Design Applications

Jürg Alexander Schiffmann, Cyril Picard, Faez Ahmed

Exploiting the recent advancements in artificial intelligence, showcased by ChatGPT and DALL-E, in real-world applications necessitates vast, domain-specific, and publicly accessible datasets. Unfortunately, the scarcity of such datasets poses a significan ...

Amer Soc Mechanical Engineers2023

Progress and prospects in nonlinear extreme-ultraviolet and X-ray optics and spectroscopy

Majed Chergui

Free-electron lasers and high-harmonic-generation table-top systems are new sources of extreme-ultraviolet to hard X-ray photons, providing ultrashort pulses that are intense, coherent and tunable. They are enabling a broad range of nonlinear optical and s ...

NATURE PORTFOLIO2023

GTC Follow-up Observations of Very Metal-poor Star Candidates from DESI

Pascale Jablonka, Arjun Dey

The observations from the Dark Energy Spectroscopic Instrument (DESI) will significantly increase the numbers of known extremely metal-poor stars by a factor of similar to 10, improving the sample statistics to study the early chemical evolution of the Mil ...

Iop Publishing Ltd2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Alberto Ortona, Manoj Kondibhau Naikade, Caroline Hain, Annapaola Parrilli

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Jahn-Teller effects in initial and final states: high-resolution X-ray absorption, photoelectron and Auger spectroscopy of allene

Majed Chergui, Luca Longetti, Thomas Roland Barillot, Camila Bacellar Cases Da Silveira, Rebecca Ann Ingle, Daniel Hollas, Ludmila Maria Diniz Leroy

Carbon K-edge resonant Auger spectra of gas-phase allene following excitation of the pre-edge 1s -> pi* transitions are presented and analysed with the support of EOM-CCSD/cc-pVTZ calculations. X-Ray absorption (XAS), X-ray photoelectron (XPS), valence ban ...

ROYAL SOC CHEMISTRY2023

Center-aware Adversarial Augmentation for Single Domain Generalization

Mathieu Salzmann, Zhiye Wang

Domain generalization (DG) aims to learn a model from multiple training (i.e., source) domains that can generalize well to the unseen test (i.e., target) data coming from a different distribution. Single domain generalization (SingleDG) has recently emerge ...

IEEE COMPUTER SOC2023