Publications associées à Swelling Behavior and Nanomechanical Properties of (Peptide-Modified) Poly(2-hydroxyethyl methacrylate) and Poly(poly(ethylene glycol) methacrylate) Brushes

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Osmosis-driven stiffening of structured hydrogels

Esther Amstad, Ran Zhao, Alexandra Thoma

Plant cells harness osmotic pressures to stiffen their leaves through strong turgor pressures. Key to this osmosisdriven stiffening is the confinement of liquids within semipermeable membranes that can regulate the transport of water molecules and ions. In ...

Elsevier2024

The Structural Dispersity of Oligoethylene Glycol-Containing Polymer Brushes Determines Their Interfacial Properties

Harm-Anton Klok, Alberto Ongaro, Irene Filipucci

Ought to their bioinert properties and facile synthesis, poly[(oligoethylene glycol)methacrylate]s (POEGMAs) have been raised as attractive alternatives to poly(ethylene glycols) (PEGs) in an array of (bio)material applications, especially when they are ap ...

Amer Chemical Soc2024

Monitoring an Emergent Pathogen at Low Incidence in Wastewater Using qPCR: Mpox in Switzerland

Tamar Kohn, Timothy R. Julian

Wastewater-based epidemiology offers a complementary approach to clinical case-based surveillance of emergent diseases and can help identify regions with infected people to prioritize clinical surveillance strategies. However, tracking emergent diseases in ...

2024

Verification of the Fourier-enhanced 3D finite element Poisson solver of the gyrokinetic full-f code PICLS

Stephan Brunner, Laurent Villard, Alberto Bottino, Moahan Murugappan

We introduce and derive the Fourier -enhanced 3D electrostatic field solver of the gyrokinetic full -f PIC code PICLS. The solver makes use of a Fourier representation in one periodic direction of the domain to make the solving of the system easily paralle ...

Elsevier2024

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Elyas Ghafoori, Christian Leinenbach, Irene Ferretto, Mahbod Golrang, Mahshid Memarian

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

Exploring High-Performance and Energy-Efficient Architectures for Edge AI-Enabled Applications

Joshua Alexander Harrison Klein

The desire and ability to place AI-enabled applications on the edge has grown significantly in recent years. However, the compute-, area-, and power-constrained nature of edge devices are stressed by the needs of the AI-enabled applications, due to a gener ...

EPFL2024

Dual-frame optimization for informationally complete quantum measurements

Ivano Tavernelli

Randomized measurement protocols such as classical shadows represent powerful resources for quantum technologies, with applications ranging from quantum state characterization and process tomography to machine learning and error mitigation. Recently, the n ...

2024

Non-volatile data storage medium and system

Martin Vetterli, Yves Bellouard, Ruben Ricca

A data storage medium (2) comprising a stacked plurality of layers (9), each layer composed of a layer material selected from a group comprising at least two different dielectric materials, adjacent layers being formed of different materials, and at least ...

2023

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

Regularization of polynomial networks for image recognition

Volkan Cevher, Bohan Wang, Grigorios Chrysos

Deep Neural Networks (DNNs) have obtained impressive performance across tasks, however they still remain as black boxes, e.g., hard to theoretically analyze. At the same time, Polynomial Networks (PNs) have emerged as an alternative method with a promising ...

Ieee Computer Soc2023

Effects of Head-Tracking Artefacts on Externalization and Localization in Azimuth With Binaural Wearable Devices

Hervé Lissek, Gilles André Courtois, Vincent Pierre Olivier Grimaldi

Head tracking combined with head movements have been shown to improve auditory externalization of a virtual sound source and contribute to the performance in localization. With certain technically constrained head-tracking algorithms, as can be found in we ...

Audio Engineering Soc2023

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...

EPFL2023

Near-wall hemodynamic parameters quantification in in vitro intracranial aneurysms with 7 T PC-MRI

Mohamed Farhat, Philippe Reymond

ObjectiveWall shear stress (WSS) and its derived spatiotemporal parameters have proven to play a major role on intracranial aneurysms (IAs) growth and rupture. This study aims to demonstrate how ultra-high field (UHF) 7 T phase contrast magnetic resonance ...

SPRINGER2023

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Reduced order models for coupled systems

Niccolo' Discacciati

Efficient numerical simulations of coupled multi-component systems can be particularly challenging. This is mostly due to the complexity of their solutions, as mutual interactions may cause emergent behaviors, including synchronization and instabilities. V ...

EPFL2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Directionality-Aware Design of Embroidery Patterns

Zhenyuan Liu

Embroidery is a long-standing and high-quality approach to making logos and images on textiles. Nowadays, it can also be performed via automated machines that weave threads with high spatial accuracy. A characteristic feature of the appearance of the threa ...

2023

A semi-supervised algorithm for improving the consistency of crowdsourced datasets: The COVID-19 case study on respiratory disorder classification

David Atienza Alonso, Lara Orlandic, Tomas Teijeiro Campo

Background and Objective: Cough audio signal classification is a potentially useful tool in screening for respiratory disorders, such as COVID-19. Since it is dangerous to collect data from patients with contagious diseases, many research teams have turned ...

2023