Publications associées à An Ink Spreading Model for Dot-On-Dot Spectral Prediction

3D Printing of Customizable Transient Bioelectronics and Sensors

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Carbon based printed electrodes for DEAs: study of pad, inkjet, and stencil printing

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Armando Matthieu Walter, Simon Holzer

Dielectric elastomer actuators (DEAs) have raised interest due to their remarkable capabilities in various applications, such as soft robotics, haptic feedback systems, and biomedical devices. To harness the full potential of DEAs, the choice of the electr ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Arnaud Bertsch, Jürgen Brugger, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

A Sprayable Electrically Conductive Edible Coating for Piezoresistive Strain Sensing

Dario Floreano, Pietro Rossi, Bokeon Kwak

Edible electronics leverages the electronic properties of food-derived materials to deliver safer technologies that can be degraded (or digested) in the environment (or body) at the end-of-life. Sensors will be central to future smart edible robots, and ed ...

2024

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Horst Pick, Andreas Stephan Lesch, Emanuela Maiorano

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

Functional Ink Formulation for Printing and Coating of Graphene and Other 2D Materials: Challenges and Solutions

Frank Nüesch, Jakob Heier, Sina Abdolhosseinzadeh, Mohammad Jafarpour

The properties of 2D materials are unparalleled when compared to their 3D counterparts; many of these properties are a consequence of their size reduction to only a couple of atomic layers. Metallic, semiconducting, and insulating types can be found and fo ...

WILEY2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices

Manuel Bianco

Inkjet printing technology was employed for the application of protective layer coatings in SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on standard and surface nitrided K41 ferritic stainless-steel substrates. Inkjet-prin ...

ELSEVIER SCI LTD2022

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Jürgen Brugger, Christophe Moser, Damien Claude-Marie Loterie, Max Kollep, Paul Delrot, Georgia Konstantinou, Lorenz Hagelüken, Jorge Andres Madrid Wolff, Antoine Vincent Boniface

Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ...

2022

Low-temperature and rapid photo-annealing process for metal-oxide thin-film transistors using combined excimer deep-ultraviolet and intensely pulsed light irradiation

Jaemin Kim

The fabrication of high-performance metal-oxide-based thin-film transistors (TFTs) on flexible and transparent polymer substrates by solution processes has garnered substantial interest, particularly for manufacturing flex-ible electronics. However, the an ...

ELSEVIER2022

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Samuel Rosset, Herbert Shea, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Reusable support for additive manufacturing

Additive manufacturing (AM) processes such as material extrusion and vat photopolymerization all require supports to print parts with overhang features. These additional supports using the same or different materials are a waste of materials since they nee ...

2021

All-Printed Electrocorticography Array for In Vivo Neural Recordings

Fabian Michael Lütolf, Diego Ghezzi, Eleonora Borda, Laura Ferlauto, Nenad Marjanovic

Bioelectronic and neuroprosthetic interfaces rely on implanted microelectrode arrays (MEAs) to interact with the human body. Printing techniques, such as inkjet and screen printing, are attractive methods for the manufacturing of MEAs because they allow fl ...

2020

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto, Massimo Rosa

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

Inkjet printed mesoscopic perovskite solar cells with custom design capability

Frank Nüesch, Jakob Heier, Sina Abdolhosseinzadeh

Customizable solar cells are required for aesthetic indoor and outdoor photovoltaic deployment as well as for the freedom of design of small and portable power supplies. We demonstrate that drop on demand inkjet printing can be used for the fabrication of ...

ROYAL SOC CHEMISTRY2020