Publications associées à Nanoscale film structure related to capacitive effects in ethylene-glycol monolayers

The Structural Dispersity of Oligoethylene Glycol-Containing Polymer Brushes Determines Their Interfacial Properties

Harm-Anton Klok, Alberto Ongaro, Irene Filipucci

Ought to their bioinert properties and facile synthesis, poly[(oligoethylene glycol)methacrylate]s (POEGMAs) have been raised as attractive alternatives to poly(ethylene glycols) (PEGs) in an array of (bio)material applications, especially when they are ap ...

Amer Chemical Soc2024

Surface passivation and functionalisation for mass photometry

Suliana Manley, Jenny Sülzle, Laila Abdelaziz Abdelmoniem Elfeky

Interferometric scattering (iSCAT) microscopy enables the label-free observation of biomolecules. Consequently, single-particle imaging and tracking with the iSCAT-based method known as mass photometry (MP) is a growing area of study. However, establishing ...

Wiley2024

Additive Fabrication of Microsupercapacitors

Amin Hodaei

Microsupercapacitors (with footprints from -mm up to -cm scale) have attracted attention for use as electrochemical energy storage devices to power wearables, IoT, and other small microsystems due to their high power density, excellent charge/discharge rev ...

EPFL2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

3D printed fiber-optic nanomechanical bioprobe

Sandor Kasas, Yuguang Chen, Jiangtao Zhou, Yiping Wang

Ultrasensitive nanomechanical instruments, e.g. atomic force microscopy (AFM), can be used to perform delicate biomechanical measurements and reveal the complex mechanical environment of biological processes. However, these instruments are limited because ...

IOP Publishing Ltd2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Tandem effect of Ag@C@Cu catalysts enhances ethanol selectivity for electrochemical CO2 reduction in flow reactors

Thi Ha My Pham, Andreas Züttel, Wen Luo, Jie Zhang, Mo Li, Youngdon Ko, Cedric David Koolen, Liping Zhong

CO-selective metals (e.g., Ag) on Cu catalysts improve the selec-tivity of multi-carbon (C2+) products in electrochemical CO2 reduc-tion. However, the origin of the improvement remains unclear due to the convolution of tandem and interface effects. Here, A ...

ELSEVIER2022

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider, Wenxin Liu, Yang Liu

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

Pascal Alexander Schouwink, Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

There has been a considerable interest in developing stiff, strong, tough, and highly stretchable hydrogels in various fields of science and technology including biomedical and sensing applications. However, simultaneous optimization of stiffness, strength ...

2021

Light-induced assembly and disassembly of polymers with PdnL2n-type network junctions

Kay Severin, Cristian Pezzato, Cesare Berton, Rujin Li

Polymers containing PdnL2n complexes as network junctions were obtained by reaction of poly(ethylene glycol)-linked N-donor ligands with Pd2+. The addition of a metastable state photoacid renders the networks light sensitive, and gel–sol transitions can be ...

2021

New Insights into the Interface of Electrochemical Flow Cells for Carbon Dioxide Reduction to Ethylene

Michael Graetzel, Shaik Mohammed Zakeeruddin, Dan Ren, Jing Gao

The implementation of an electrochemical flow cell has enabled improved efficiency for CO2 reduction. However, in situ spectroscopic insights into the interface are still lacking. Here, we investigate a series of copper layers with different thicknesses on ...

AMER CHEMICAL SOC2021

In situ nanoscale studies of copper-based catalysts for carbon dioxide electroreduction

Karla Banjac

The urgency of climate change demands the simultaneous removal of carbon dioxide from the atmosphere and the transition to renewable energy sources. This aim is realizable through electrochemical reduction of carbon dioxide (CO2RR), which is a promising ro ...

EPFL2021

Coating Porous MXene Films with Tunable Porosity for High-Performance Solid-State Supercapacitors

Jakob Heier, Sina Abdolhosseinzadeh

Two-dimensional MXenes with their outstanding physical and chemical properties have been extensively used in numerous fields such as electrochemical energy storage, catalysis, and sensing. In these applications, high active surface area and facilitated dif ...

WILEY-V C H VERLAG GMBH2021

Reinforced polypyrrole with 2D graphene flakes decorated with interconnected nickel-tungsten metal oxide complex toward superiorly stable supercapacitor

Ulf Anders Hagfeldt, Seyyed Alireza Hashemi

Prompt development of electronic devices and sensors raised the requirement for design/fabrication of advanced energy sources capable of providing considerable amount of energy for consuming platforms through practical nanotechnological approaches. For thi ...

ELSEVIER SCIENCE SA2021

Shape-controlled Copper Nanocrystals as Electrocatalysts for CO2RR

Pranit Srinivas Iyengar

The electrochemical CO2 reduction reaction (CO2RR) has the potential to mitigate the rising CO2 levels while storing renewable energy in chemical bonds. Copper is the only single metal electrocatalyst producing high energy dense hydrocarbons, albeit into 1 ...

EPFL2021

Porous granules by freeze granulation of Pickering emulsions stabilized with halloysite particles

Paul Bowen

Pickering emulsions stabilized with a natural silicate mineral, halloysite, were dried by freeze granulation in order to prepare porous granules. Different formulations were studied, by varying the pH of the suspension, the ionic strength and with the addi ...

ELSEVIER2020

Degradation of plastic materials into terephthalic acid (tpa), ethylene glycol and/or other monomers that form the plastic materials

Berend Smit, Samantha Lynn Anderson, Kyriakos Stylianou, Christopher Patrick Ireland

The invention relates to a method for degradation of plastic materials into terephthalic acid (TPA)and/or ethylene glycol and/or other monomers that form the plastic materials. ...

2020

Metal-organic framework derived copper catalysts for CO2 to ethylene conversion

Jun Li, Yun Liu, Ning Wang

The electrochemical reduction of CO2 to ethylene provides a carbon-neutral avenue for the conversion of CO2 to value-added fuels and feedstocks, so contributing to the storage of intermittent renewable electricity. The exploration of efficient electrocatal ...

Royal Society of Chemistry2020

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Enrico Bertero

Electrodeposition of stainless steel-like materials such as FeCrNi alloy into micro- and nanotemplates provides a sustainable framework for creating biomedical-oriented micro- and nanocomponents with outstanding characteristics. While Cr(III)-based electro ...

2020