Publications associées à Tuning the pH Sensitivity of Poly(methacrylic acid) Brushes

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Soft Mechanochemistry of Disulfide-Crosslinked Polymer Networks

Zhao Meng

Mechanochemistry harnesses mechanical force to facilitate chemical reactions. Traditionally, the field of polymer mechanochemistry has used methods to activate chemical bonds, which use forces that are larger than those that are required to break a covalen ...

EPFL2024

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Supramolecular Polymer Brushes

Friederike Katharina Metze

Thin polymer coatings present a method to modify the surface properties of underlying substrates. Polymer-coated surfaces have been used as anticorrosive materials, surfaces with special wetting properties, antifriction materials, and as materials for biom ...

EPFL2023

Reinforced Supramolecular Networks of End Functionalized Polymers for Tailored Thermomechanical Property Profiles

Yevhen Hryshunin

Thermoset rubbers give rise to elastomers with tunable stiffness and high resilience but are not recyclable. Thermoplastic elastomers can address this problem but their broad applicability is impeded by either limited operating temperatures or inferior ela ...

EPFL2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Jianhang Yang, Jun Shintake, Vivek Ramachandran, Yegor Piskarev, Michael Dickey

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

Engineering of chitosan-based derivatives for non-viral gene delivery

Laura Camille Louise Nicolle

Gene therapy offers the possibility to treat or even cure diseases originating from genetic defects by introducing a therapeutic gene in target cells or correcting the initial defective gene. Amongst different options, non-viral vectors rely on the deliver ...

EPFL2022

Polymer Translocation through Nanometer Pores

Maria-Alexandra Paun

In this paper the loaded polymer transport and its escape via a nanometer size aperture, virtually by nanomembrane, the polymer being moved by an exterior electrostatic field, has been studied. Assuming a linear dependency of the friction coefficient on th ...

MDPI2022

Systematic extraction of a control-oriented model from perturbative experiments and SOLPS-ITER for emission front control in TCV

Mirko Wensing, Olivier Claude Martin Février, Artur Perek

Systematic extraction of locally valid dynamic models from experiments is necessary for controller design and the validation of high fidelity models. This paper describes the extraction of a dynamic model in the form of a transfer function, giving the dyna ...

IOP Publishing Ltd2022

Extraction and controlled functionalization of lignin for materials applications

Stefania Bertella

Lignin is a renewable aromatic polymer that due to its abundance and unique chemical structure is a promising candidate to replace aromatic materials that are currently sourced from fossil oil. The same structure of lignin poses however drawbacks for its v ...

EPFL2022

Label-Free C-Reactive Protein Si Nanowire FET Sensor Arrays With Super-Nernstian Back-Gate Operation

Mihai Adrian Ionescu, Yann Christophe Sprunger, Luca Capua, Ron Gill, Aristea Grammoustianou, Felix Risch

We present a CMOS-compatible double gate and label-free C-reactive protein (CRP) sensor, based on silicon on insulator (SOI) silicon nanowires arrays. We exploit a reference subtracted detection method and a super-Nernstian internal amplification given by ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Mechanical Activation of Chemical Bonds at Polymer Interfaces

Julian Nicolas Bleich

Polymer brushes are a specific class of polymer thin films in which each chain is tethered to the underlying substrate via one chain end. In sufficiently densely grafted assemblies, the individual polymer chains are forced into an extended chain conformati ...

EPFL2021

Renewable monomer and polymer thereof

Jeremy Luterbacher, Graham Reid Dick, Stefania Bertella, Lorenz Perry Manker

Described is a compound having the structure (I), (II) or (V), Formulae(I), (II), (V), wherein R1 is -H, -CH2OH or -CH(OH)CH2OH; R2 is -H, -OH, or -CH2OH; R3 is -H, -OH, or -CH2OH; n is 0 or 1; p is 0 or 1; R10 is hydrogen or a hydrocarbon moiety with 1 to ...

2021

Balancing of Coupled Piezoelectric NEMS Resonators

Luis Guillermo Villanueva Torrijo, Damien Maillard, Johannes Mathis Valentin Lemonde

Micro and Nano Electro Mechanical systems (M/NEMS) have a lot of potential to be used for sensing in different schemes and operation modes. We focus here on the use of coupled resonators for sensing and address the major limitation that these systems face, ...

FRONTIERS MEDIA SA2021

Reversible and Broad-Range Oxygen Sensing Based on Purely Organic Long-Lived Photoemitters

Esther Amstad, Efe Armagan, René M. Rossi

The detection of oxygen (O-2) by optical sensors is of growing importance, for example, in biology, life science, environmental science, and aerodynamics, where the composition of gases is crucial for many applications. Purely organic optical O-2 sensors a ...

2021

Printed Polymer Composite Sensors for Low-Power, Near Room-Temperature Detection and Classification of VOCS

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

We demonstrate the application of inkjet-printed near room-temperature chemiresistors composed of polymer-carbon black (CB) composites for detecting and classifying volatile organic compounds (VOC). Our results demonstrate that the printed sensors can sele ...

IEEE2021

Phase behaviour and structure of a model biomolecular condensate

Julian Charles Shillcock

Phase separation of immiscible fluids is a common phenomenon in polymer chemistry, and is recognized as an important mechanism by which cells compartmentalize their biochemical reactions. Biomolecular condensates are condensed fluid droplets in cells that ...

2020

Reversibly Cross-Linking Polymer Brushes Using Interchain Disulfide Bonds

Harm-Anton Klok, Piotr Mocny

The introduction of interchain cross-links in surface-grafted polymer brushes increases the robustness and mechanical properties of these thin polymer films. In most cases, cross-linked polymer brushes contain permanent interchain cross-links. The use of r ...

American Chemical Society2020