Publications associées à Use of compact Laser Doppler Velocimetry in reduced scale model testing of hydraulic machines

On the prediction of the induced damage by the start-up sequence of Francis turbines: On operational resilience framework

Christophe Nicolet, Mario Paolone, Martin Seydoux, Elena Vagnoni

The number of transient operations in hydraulic machinery connected to power grid, notably start-ups and shut-downs, has observed a substantial increase in recent decades, primarily driven by the global shift toward intermittent renewable energy sources. S ...

Pergamon-Elsevier Science Ltd2024

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

Twenty years of irrigation acclimation is driven by denser canopies and not by plasticity in twig- and needle-level hydraulics in a Pinus sylvestris forest

Charlotte Grossiord, Eugénie Isabelle Mas, Christoph Bachofen, Alex Tunas Corzon, Hervé Cochard, Alice Jacqueline Frédérique Gauthey

Climate change is predicted to increase atmospheric vapor pressure deficit, exacerbating soil drought, and thus enhancing tree evaporative demand and mortality. Yet, few studies have addressed the longer-term drought acclimation strategy of trees, particul ...

Oxford Univ Press2024

Design ontology for cognitive thread supporting traceability management in model-based systems engineering

Dimitrios Kyritsis, Yan Yan, Jinzhi Lu

Industrial information integration engineering (IIIE) is an interdisciplinary field to facilitate the industrial information integration process. In the age of complex and large-scale systems, model-based systems engineering (MBSE) is widely adopted in ind ...

Elsevier2024

Structural impact of the start-up sequence on Pelton turbines lifetime: Analytical prediction and polynomial optimization

Mario Paolone, Elena Vagnoni, Aldo Leonardo Alerci

Hydropower plants play a crucial role in the power system facing ambitious renewable energy targets. Due to their inherent controllability, they are well suited to provide flexibility to the grid. However, an increased flexibility provision leads to a prol ...

Pergamon-Elsevier Science Ltd2023

Community-Aware Group Testing

Suhas Diggavi, Christina Fragouli, Pavlos Nikolopoulos, Sundara Rajan Srinivasavaradhan

Group testing is a technique that can reduce the number of tests needed to identify infected members in a population, by pooling together multiple diagnostic samples. Despite the variety and importance of prior results, traditional work on group testing ha ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Seismic Testing of Adjacent Interacting Masonry Structures

Katrin Beyer, Andrea Penna, Igor Tomic

Masonry buildings form building aggregates around the world in historical centers, which developed as the layout of the city or village densified. In these aggregates, adjacent buildings can share structural walls, connected at the interfaces by interlocki ...

2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Enhancing Flood Resilience: Sediment Management in Le Bez Torrent

Giovanni De Cesare, Azin Amini, Romain Nathan Hippolyte Merlin Van Mol

In the canton of Bern, Switzerland, the “Le Bez” torrent is known for its flash floods, causing sediment and wood debris buildup in Villeret village settled on the alluvial fan. To mitigate this issue, a sediment/wood trap system is being implemented upstr ...

Swiss Academy of Sciences (SCNAT)2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Addressing the challenges of homogeneity, quality control and waste handling in soil bio-cementation: A large-scale experiment

Lyesse Laloui, Dimitrios Terzis, Ray Harran

In an attempt to go beyond the conventional laboratory experiments widely reported in literature around the emerging technique of soil bio-cementation, this work addresses key challenges related to its large-scale application. Precisely, a state-of-the-art ...

JAPANESE GEOTECHNICAL SOC2023

Impact of substrate clogging on vertical connectivity

Giovanni De Cesare, Romain Maxime Dubuis, Robin Schroff

Connectivity between the hyporheic zone and the flow is essential for the development of benthos and the reproductive success of spawning fish. The infiltration of fine sediment leads to clogging of the riverbed, reducing porosity and vertical water exchan ...

2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

CFD simulations of hydraulic short-circuits in junctions, application to the Grand’Maison power plant

François Avellan, Cécile Münch-Alligné

In the framework of the XFLEX HYDRO H2020 European Project, the pumped-storage power plant of Grand'Maison (France), owned by Electricité De France, focuses on the implementation of the hydraulic short-circuit (HSC) operating mode. This mode increases the ...

2022

Code Generation Approach Supporting Complex System Modeling based on Graph Pattern Matching

Dimitrios Kyritsis, Yan Yan, Jinzhi Lu

Code generation is an effective way to drive the complex system development in model-based systems engineering. Currently, different code generators are developed for different modeling languages to deal with the development of systems with multi-domain. T ...

ELSEVIER2022

Weakening effect of various pore fluids on the tensile strength of granite

Guanyi Lu

Laboratory three-point bending experiments are carried out to evaluate the effect of various fluids on the tensile strength of granite. The granite specimens were tested under both dry and saturated conditions. The fluids used to saturate the granite inclu ...

SPRINGER HEIDELBERG2022

Drained Axial Pipe-Soil Resistance at Low Confinement Using Tilt Table and Direct Shear Tests

Roba Houhou

Establishing a reliable value for the axial pipe-soil interface resistance is critical for the design of offshore pipelines. Over the last few years, several independent research groups have modified existing methodologies or devised new testing setups to ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

Towards Beam-Beam Simulations for FCC-ee

Tatiana Pieloni, Xavier Buffat, Péter Kicsiny, Mike Seidel, Giovanni Iadarola

The FCC-ee (Future Circular Collider) lepton collider is currently the most favored next generation research infrastructure project at CERN, aimed at studying properties of standard model particles with the highest precision ever. The chosen parameters of ...

JACoW Publishing, Geneva, Switzerland2022