Publications associées à Wireless neuromodulation with porous silicon

Bodily implant microelectrode and bodily implant microelectrode fabrication method

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

The present invention concerns a bodily implantable or probe device and microelectrode fabrication method comprising providing at least one silicon substrate including an electronic device or unit; providing, on a first side of the silicon substrate, at le ...

2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Investigation and Mitigation of Moisture- and Potential-Induced Degradation Mechanisms of Silicon Heterojunction Solar Cells and Modules

Olatz Arriaga Arruti

Photovoltaic (PV) technology is one of the most promising renewable energy sources. The PV market is dominated by crystalline silicon (c-Si) based technologies, thus ensuring their long-term performance is of paramount importance for manufacturers, investo ...

EPFL2023

Performance and degradation in silicon PV systems under outdoor conditions in relation to reliability aspects of silicon PV modules - Summary of results of COST Action PEARL PV

David Moser, Andrew Wayne Fairbrother

This paper presents the main results of COST Action PEARL PV, aiming at finding connections between the observed performance of monitored PV systems and degradation causes and failure modes according to literature with a focus on the most dominant technolo ...

IEEE2023

22.8% full-area bifacial n-PERT solar cells with rear side sputtered poly-Si (n) passivating contact

Christophe Ballif, Sylvain Nicolay, Bertrand Yves Paul Paviet-Salomon, Andrea Ingenito, Sofia Libraro

High-temperature compatible passivating contacts based on phosphorus doped polysilicon (poly-Si(n)) on a thin silicon oxide, employed on the rear side of bifacial n-PERT like solar cells provide an efficiency increase while being compatible with current ph ...

ELSEVIER2023

Vapor Deposition of Perovskite Solar Cells

Quentin Jean-Marie Armand Guesnay

Thanks to the continuous improvement of crystalline silicon (c-Si) solar cells, largely dominating the market, photovoltaic electricity is nowadays the cheapest source of energy on the market. Yet, solar energy is far from being completely harvested, as t ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Rear textured p-type high temperature passivating contacts and their implementation in perovskite/silicon tandem cells

Christophe Ballif, Antoine Descoeudres, Sylvain Nicolay, Quentin Thomas Jeangros, Philippe Wyss, Soo-Jin Moon, Arnaud Walter, Andrea Ingenito

Silicon solar cells based on high temperature passivating contacts are becoming mainstream in the photovoltaic industry. Here, we developed a high-quality boron-doped poly-silicon hole contact. When combined with a co-processed phosphorus-doped poly-silico ...

Royal Soc Chemistry2023

Silica aerogel as rear reflector in silicon heterojunction solar cells for improved infrared response

Deniz Türkay

Silicon (Si), with its indirect bandgap, is a non-ideal absorber. Thus, various strategies to boost silicon solar cells' efficiency, including advanced texturing, multilayer anti-reflecting coating, and rear reflectors are utilized. Dielectrics, deposited ...

ELSEVIER2023

Status and perspectives of crystalline silicon photovoltaics in research and industry

Christophe Ballif, Franz-Josef Haug, Mathieu Gérard Boccard

Crystalline silicon (c-Si) photovoltaics has long been considered energy intensive and costly. Over the past decades, spectacular improvements along the manufacturing chain have made c-Si a low-cost source of electricity that can no longer be ignored. Over ...

2022

SiNx and AlOx Nanolayers in Hole Selective Passivating Contacts for High Efficiency Silicon Solar Cells

Xinya Niu, Audrey Marie Isabelle Morisset

The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiNx and AlOx nanolayers as promising interface dielectrics to enable high efficiency ho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

In Situ Reflectometry and Diffraction Investigation of the Multiscale Structure of p-Type Polysilicon Passivating Contacts for c-Si Solar Cells

Christophe Ballif, Franz-Josef Haug, Andrea Ingenito, Audrey Marie Isabelle Morisset

The integration of passivating contacts based on a highly doped polycrystalline silicon (poly-Si) layer on top of a thin silicon oxide (SiOx) layer has been identified as the next step to further increase the conversion efficiency of current mainstream cry ...

AMER CHEMICAL SOC2022

Carrier-selective contacts using metal compounds for crystalline silicon solar cells

Mathieu Gérard Boccard, Julie Amandine Dreon

Solar cells rely on the efficient generation of electrons and holes and the subsequent collection of these photoexcited charge carriers at spatially separated electrodes. High wafer quality is now commonplace for crystalline silicon (c-Si) based solar cell ...

WILEY2023

Material Development for Perovskite/Silicon Tandem Photovoltaics

Peter Joseph Fiala

The developed world is built on the fact that energy is readily available and functionally infinite. The electricity from the wall, the gas at the station, and the heat in our homes are reliable and low-cost. But this comfort is so far only possible throug ...

EPFL2022

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022

Impact of rapid thermal processing on bulk and surface recombination mechanisms in FZ silicon with fired passivating contacts

Christophe Ballif, Franz-Josef Haug, Mario Joe Lehmann, Andrea Ingenito, Sofia Libraro, Audrey Marie Isabelle Morisset

We investigate bulk and interface recombination in crystalline silicon with p-type fired passivating contacts. These consist of a chemical oxide and an in-situ doped layer of SiCx with low carbon content. Following a rapid thermal annealing to activate the ...

ELSEVIER2022

Monolithic Perovskite-Silicon Tandem Solar Cells: From the Lab to Fab?

Christophe Ballif, Antonin Faes, Quentin Thomas Jeangros, Chien-Jen Yang, Fan Fu

This review focuses on monolithic 2-terminal perovskite-silicon tandem solar cells and discusses key scientific and technological challenges to address in view of an industrial implementation of this technology. The authors start by examining the different ...

Wiley-V C H Verlag Gmbh2022

New metric for carrier selective contacts for silicon heterojunction solar cells

Mathieu Gérard Boccard, Jakub Holovsky

Heterojunction carrier selective contacts for solar cells have gained great attention because of the ability of these contacts to efficiently collect majority carriers while hindering the recombination of minority carriers, thus resulting in the highest re ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Contact Design for Silicon Heterojunction Solar Cells

Luca Massimiliano Antognini

Today more than ever the world needs clean energy sources and thus a fast deployment and scaling up of the photovoltaic industry. In this context improving solar cell efficiency plays a major role. In order to achieve the maximum single junction efficiency ...

EPFL2022