Publications associées à Experimental investigation of hydraulic fracture growth in an anisotropic rock with pre-existing discontinuities under different propagation regimes

Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades

Véronique Michaud, Anastasios Vassilopoulos, Jialiang Fan

This article investigates the effects of voids, joint geometry, and test conditions on the quasi-static Mode I fracture performance of thick adhesive Double Cantilever Beam (DCB) joints such as those prevailing in wind industry and shipbuilding. The specim ...

2024

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

2023

Propagation of planar three-dimensional buoyant hydraulic fractures

Andreas Möri

Hydraulic fractures are driven by an internal fluid pressure exceeding the minimum compressive stress, propagating in a direction perpendicular to the latter. This class of tensile fractures has gained interest over the last fifty years due to the developm ...

EPFL2023

Three-dimensional hydraulic fracture propagation in homogeneous and heterogeneous media

Carlo Peruzzo

Hydraulic fractures are tensile fractures that occur in solid materials due to the natural intrusion or anthropogenic injection of a viscous fluid into a fracture channel. The deliberate creation of hydraulic fractures is part of an industrial technology h ...

EPFL2023

Arrest Mechanisms of Buoyant Hydraulic Fractures

Andreas Möri, Brice Tanguy Alphonse Lecampion, Dmitriy Garagash, Carlo Peruzzo

Hydraulic fracturing (HF) treatments can form widespread fractures. Understanding their containment at depth is critical, given the positive buoyancy contrast between the fracturing fluid and the surrounding rock, promoting upward growth. We study arrest m ...

American Rock Mechanics Association (ARMA), OnePetro2023

Three-dimensional buoyant hydraulic fractures: finite volume release

Andreas Möri, Brice Tanguy Alphonse Lecampion

In impermeable media, a hydraulic fracture can continue to expand even without additional fluid injection if its volume exceeds the limiting volume of a hydrostatically loaded radial fracture. This limit depends on the mechanical properties of the surround ...

Cambridge University Press2023

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

Véronique Michaud, Anastasios Vassilopoulos, Jialiang Fan

The influence of voids on the quasi-static Mode I fracture performance of thick adhesive joints was investigated in this article. Double Cantilever Beam (DCB) joints were manufactured with glass fiber reinforced epoxy adherends and SikaPower®-830 epoxy adh ...

2023

Shearing and opening of a pre-existing discontinuity in response to fluid injection

Brice Tanguy Alphonse Lecampion, Ankit Gupta, Alexis Alejandro Sáez Uribe

We investigate the fluid-driven growth of a shear crack along a frictional discontinuity and its transition to hydraulic fracturing (sometimes referred to as hydraulic jacking) under plane-strain conditions. We focus on the case of a constant friction coef ...

2023

Modeling of solids particle diversion to promote uniform growth of multiple hydraulic fractures

Guanyi Lu

Solid particulate additives are sometimes used to promote the uniform growth of multiple hydraulic fractures in horizontal oil and gas wells. The principle is that solid particulates block, accumulate, and form larger porous plugging zones preferentially a ...

ELSEVIER2023

Reactivation of variably sealed joints and permeability enhancement in geothermal reservoir rocks

Michael Heap, Alexandra Roma Larisa Kushnir

Hydraulic stimulation of enhanced deep geothermal reservoirs commonly targets pre-existing joint networks with the goal of increasing reservoir permeability. Here, we study the permeability and strength of joint-free and jointed Buntsandstein sandstones fr ...

2023

The influence of water-saturation on the strength of volcanic rocks and the stability of lava domes

Marie Estelle Solange Violay, Michael Heap

The rocks forming a volcanic edifice or dome are typically saturated or partially-saturated with water. However, most experiments aimed at better understanding the mechanical behaviour of volcanic rocks have been performed on dry samples, and therefore mos ...

2023

Single-Well Pore Pressure Preconditioning for Enhanced Geothermal System Stimulation

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Mathias Alexandre David Lebihain

The stress state is an important parameter in terms of both earthquake nucleation and rupture. Here, a new stimulation technique is proposed for Enhanced Geothermal Systems (EGSs), which have previously been burdened with a number of high-profile incidence ...

2023

CRACK SHIELDING MECHANISMS OF INTERLAYERED EPOXY MATERIALS UNDER QUASI-STATIC AND FATIGUE LOADING

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

This research explores the capability of PEI and PVDF thermoplastic interlayers to arrest cracks in epoxy materials modified with short-glass fibers and core-shell rubber particles. It also investigates the effect of interlayer position, the number of inte ...

Queen's University Belfast2023

Experimental Investigation of Hydraulic Fracture Closure in a Porous Sandstone

Brice Tanguy Alphonse Lecampion, Mohsen Talebkeikhah, Seyyedmaalek Momeni, Guanyi Lu

Depending on the type of fracture propagation regime when the injection stops, the closure of the fracture may occur exactly after the injection ceases, in the case where the fracturing process is dominated by fracture energy, or the fracture propagate for ...

Onepetro2022

Effects of velocity-dependent apparent toughness on the pre- and post-shut-in growth of a hydraulic fracture

Dong Liu, Guanyi Lu

We investigate the growth of a plane-strain/radial hydraulic fracture in an infinite impermeable medium driven by a constant injection rate assuming that the apparent toughness scales with the decreasing fracture growth rate in a power-law relation. The vi ...

ELSEVIER SCI LTD2022

On the scale dependence in the dynamics of frictional rupture: Constant fracture energy versus size-dependent breakdown work

Fabian Barras, Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Federica Paglialunga, Mathias Alexandre David Lebihain

Potential energy stored during the inter-seismic period by tectonic loading around faults is released during earthquakes as radiated energy, frictional dissipation and fracture energy. The latter is of first importance since it is expected to control the n ...

2022

Determining crack kinematics from imaged crack patterns

Katrin Beyer, Amir Rezaie, Bryan German Pantoja Rosero, Ketson Roberto Maximiano Dos Santos

Determining the relationship between the cause of damage and the subsequent structural behavior of infrastructure systems requires an accurate characterization of the propagation of cracks, which represents the evolution of the damage state. When no inform ...

2022

Improving the Accuracy of Fracture Toughness Measurement in Burst Experiments

Guanyi Lu, Yixuan Zhang

Experimental studies suggest that the fracture toughness of rocks increases with the confining pressure. Among many methods to quantify this dependency, a so-called burst experiment (Abou-Sayed, 1978) may be the most widely applied in practice. Its thick w ...

SPRINGER WIEN2022

Prediction of crack nucleation and propagation in porous ceramics using the phase-field approach

Arata Nakajo

The relevance of the phase-field approach to simulate the fracture in porous ceramics has been investigated. For this purpose, the conditions for the crack initiation using the phase-field model have been compared to the theoretical predictions of the coup ...

ELSEVIER2022

Understanding the mechanisms of adhesive wear for heterogeneous materials through atomistic simulations

Jean-François Molinari, Sacha Zenon Wattel, Antonio Joaquin Garcia Suarez

When two rough surfaces slide against each other, two main behaviors can be observed at the asperity level: A ductile behavior where the asperities tend to smooth out or a brittle behavior where the asperities detach and form debris. Recently, a critical l ...

2022