Publications associées à Closed-loop PLM for intelligent products in the era of the Internet of things

Morphological and Material Programability of a Hall-Effect Based Soft Tactile Sensors

Josephine Anna Eleanor Hughes, Sudong Lee

The different receptors in human skin show not only diversity in the stimuli to which they respond, but also variable sensitivity and directionality. This is often determined by their location or morphology, and can play an important role in filtering or a ...

IEEE2024

Eco-Conscious Approach to Wireless Gas Monitoring With a Hybrid Printed Passive Sensor Tag

Sandro Carrara, Johanna Zikulnig, Jürgen Kosel

Addressing the environmental impact of electronic waste in biomedical sensing, an eco-conscious approach to the realization of a Chitosan-based Acetone sensor tag for wireless gas monitoring is presented. The fabrication involves inkjet printing of silver ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Generalization and Personalization of Machine Learning for Multimodal Mobile Sensing in Everyday Life

Lakmal Buddika Meegahapola

A range of behavioral and contextual factors, including eating and drinking behavior, mood, social context, and other daily activities, can significantly impact an individual's quality of life and overall well-being. Therefore, inferring everyday life aspe ...

EPFL2024

Design and Evaluation of Modular Gas and Wind Sensing Nodes for Static and Mobile Deployments

Alcherio Martinoli, Emmanuel Droz, Wanting Jin

Static and mobile sensor nodes can be employed in gas monitoring tasks to detect gas leaks in an early stage and localize gas sources. Due to the intermittent nature of gas plumes and the slow dynamics of commonly used gas sensors, measuring gas concentrat ...

2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Spatial-Temporal Graph Attention Fuser for Calibration in IoT Air Pollution Monitoring Systems

Olga Fink, Mengjie Zhao, Keivan Faghih Niresi

The use of Internet of Things (IoT) sensors for air pollution monitoring has significantly increased, resulting in the deployment of low-cost sensors. Despite this advancement, accurately calibrating these sensors in uncontrolled environmental conditions r ...

Institute of Electrical and Electronics Engineers2023

Radiation Hardness of MALTA2, a Monolithic Active Pixel Sensor for Tracking Applications

Edoardo Charbon, Ashish Sharma, Francesco Piro

MALTA is a depleted monolithic active pixel sensor (DMAPS) developed in the Tower Semiconductor 180-nm CMOS imaging process. Monolithic CMOS sensors offer advantages over current hybrid imaging sensors in terms of both increased tracking performance due to ...

Ieee-Inst Electrical Electronics Engineers Inc2023

MALTA-Cz: a radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate

Edoardo Charbon, Ashish Sharma, Francesco Piro

Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czoch ...

Iop Publishing Ltd2023

Integrated electronics for time-of-flight positron emission tomography photodetectors

Andrada Alexandra Muntean

Positron emission tomography is a nuclear imaging technique well known for its use in oncology for cancer diagnosis and staging. A PET scanner is a complex machine which comprises photodetectors placed in a ring configuration that detect gamma photons gen ...

EPFL2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Performance investigation of cameras using HDR sensors for daylight glare evaluations

Jan Wienold, Geraldine Cai Ting Quek, Dong Hyun Kim

This study presents a novel framework for evaluating the luminance measurement capabilities of High Dynamic Range (HDR) sensor cameras in indoor glare conditions. Results indicate that the practical usage range of the CSEM VIP camera is significantly lower ...

International Commission on Illumination2023

Front-End Circuits for Radiation-Hard Monolithic CMOS Sensors targeting High-Energy Physics Applications

Francesco Piro

Monolithic pixel sensors integrate the sensor matrix and readout in the same silicon die, and therefore present several advantages over the more largely used hybrid detectors in high-energy physics. They offer an easier detector assembly, lower cost, lower ...

EPFL2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Highly Sensitive Detection of the Antidepressant Fluoxetine With an Extended Gate Field Effect Transistor

Mihai Adrian Ionescu, Shokoofeh Sheibani

Fluoxetine (FL) is one of the selective serotonin reuptake inhibitors, which is used as an anti-depressant, as well as anti-panic drug. In this work, a sensor for label-free recognition of trace amounts of FL is introduced, which is based on an extended ga ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

MALTA3: Concepts for a new radiation tolerant sensor in the TowerJazz 180 nm technology

Francesco Piro

The upgrade of the MALTA DMAPS designed in Tower 180 nm CMOS Imaging process will implement the numerous modifications, as well as front-end changes in order to boost the charge collection efficiency after the targeted fluence of 1x10(15) 1 MeVn(eq)/cm(2). ...

ELSEVIER2022

Modelling electronic transport in monocrystalline metal oxide gas sensors: from the surface kinetics to the experimental response

Roberto Guarino, Gianluca Piccinini

Gas sensing systems and devices based on metal oxides are widely spreading due to their high performance in terms of sensor response and relatively low costs. Despite several experimental studies, as well as molecular simulations, are available in the lite ...

2022

A 500 x 500 Dual-Gate SPAD Imager With 100% Temporal Aperture and 1 ns Minimum Gate Length for FLIM and Phasor Imaging Applications

Claudio Bruschini, Edoardo Charbon, Arin Can Ülkü, Andrei Ardelean, Paul Mos, Michael Alan Wayne

In this article, we report on SwissSPAD3 (SS3), a 500 x 500 pixel single-photon avalanche diode (SPAD) array, fabricated in 0.18-mu m CMOS technology. In this sensor, we introduce a novel dual-gate architecture with two contiguous temporal windows, or gate ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Configurable Organic Electrochemical Transistors with Printed Functional Materials for Multiplexed Sweat Analysis

Silvia Demuru

Monitoring human sweat with wearable biochemical sensors could give insights into the hydration, fatigue, and health status, tracking the variations of biomarkers non-invasively and in real-time. In this field, organic electrochemical transistors (OECTs) a ...

EPFL2022

Asynchrony Increases Efficiency: Time Encoding of Videos and Low-Rank Signals

Martin Vetterli, Adam James Scholefield, Karen Adam

In event-based sensing, many sensors independently and asynchronously emit events when there is a change in their input. Event-based sensing can present significant improvements in power efficiency when compared to traditional sampling, because (1) the out ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

High-Performance CMOS SPAD-Based Sensors for Time-of-Flight PET Applications

Francesco Gramuglia

Detecting light, photon by photon, has been possible since the 1930s, with the invention of the photomultiplier tube (PMT). However, it is only since the 1970s, that solid-state single-photon detectors have emerged and only since 2003 that a new technology ...

EPFL2022