Publication

High resolution eddy current inspection and eddy current testing for additive manufacturing

Publications associées (30)

Reduced Training Data for Laser Ultrasound Signal Interpretation by Neural Networks

Romain Christophe Rémy Fleury, Janez Rus

The performance of machine learning algorithms is conditioned by the availability of training datasets, which is especially true for the field of nondestructive evaluation. Here we propose one reconfigurable specimen instead of numerous reference specimens ...

2024

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Modeling, Optimization and Design of High Power Medium Frequency Transformers

Nikolina Djekanovic

Nowadays, direct current (DC) technology is increasing its presence in alternating current (AC) power systems. This trend is enabled by the progress in energy conversion through semiconductor devices and power electronics. Therefore, it is possible to imag ...

EPFL2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

A review of the modeling approaches of the lightning M-component with special attention to their current and electric field characteristics

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci, Mohammad Azadifar, Qi Li

In this paper, we present the characteristics of current, electric fields and modeling approaches of lightning M-component mode of charge transfer. We consider both the classical M-components (occurring after return strokes) and M-component-type ICC (Initi ...

Elsevier2023

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Ryan Mitchell van Dommelen, Jaemin Kim

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

Tailoring Organic/Inorganic Interface Trap States of Metal Oxide/Polyimide toward Improved Vacuum Surface Insulation

Chao Wang, Guang-Yu Sun, Haoxiang Zhao

High-voltage and high-power devices are indispensablein spacecraftfor outer space explorations, whose operations require aerospace materialswith adequate vacuum surface insulation performance. Despite persistentattempts to fabricate such materials, current ...

AMER CHEMICAL SOC2023

Impact of Hysteresis Losses in Hybrid (HTS-LTS) Coils for Fusion Applications

Davide Uglietti

Several conductor designs featuring High Temperature Superconducting (HTS) stacked tapes for fusion coils are being proposed. These conductors are planned to operate in time-varying magnetic field and current; thus, the estimation of AC losses is fundament ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Manufacturing and toughening effects on the material properties of wind turbine blade adhesives

Anastasios Vassilopoulos, Dharun Vadugappatty Srinivasan

Hybrid adhesives can be developed using commercially available adhesive materials and customized to the required loading conditions. In this paper, SPABONDTM 820HTA (non-toughened) and SPABONDTM 840HTA (toughened) adhesives are hybridized by two strategies ...

2022

Defects in III-N LEDs: experimental identification and impact on electro-optical characteristics

Jean-François Carlin, Nicolas Grandjean, Mauro Mosca, Camille Haller

III-N light-emitting-diodes (LEDs) are subject of intense investigations, thanks to their high efficiency and great reliability. The quality of the semiconductor material has a significant impact on the electro-optical performance of LEDs: for this reason, ...

SPIE-INT SOC OPTICAL ENGINEERING2022

Reduced material loss in thin-film lithium niobate waveguides

Tobias Kippenberg, Di Zhu, Guanhao Huang, Mikhail Churaev, Zihan Li

Thin-film lithium niobate has shown promise for scalable applications ranging from single-photon sources to high-bandwidth data communication systems. Realization of the next generation high-performance classical and quantum devices, however, requires much ...

AIP Publishing2022

Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè

Paschen failures in ITER, W7-X and JT60 superconducting coils at the acceptance tests have shown that it is highly desirable to lower the coil discharge voltage (U-d) of the DEMO Toroidal Field (TF) coils. Another benefit of lowering the U-d might be the r ...

IEEE Institute of Electrical and Electronics Engineers2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

Virtual metrology applied to milling process

Paul Arthur Adrien Pierre Dreyfus

Production quality and process efficiency are the two main drivers that lead any industrial strategy. To ensure product quality, a duality historically existed between two approaches, namely batch sampling and systematic sampling. In batch sampling, the ba ...

EPFL2022

Roadmap on Machine learning in electronic structure

Michele Ceriotti, Andrea Grisafi, Max David Veit, Jigyasa Nigam

In recent years, we have been witnessing a paradigm shift in computational materials science. In fact, traditional methods, mostly developed in the second half of the XXth century, are being complemented, extended, and sometimes even completely replaced by ...

IOP Publishing Ltd2022

A Homogenization Model for Soft Magnetic Composites Considering the Effect of Mechanical Stress

Xiaotao Ren

Soft Magnetic Composites (SMC) are an alternative to laminated steels for the design of smaller and lighter electromagnetic devices.Such electromagnetic devices might be subjected to significant mechanical stresses that can alter their electromagnetic prop ...

Institute of Electrical and Electronics Engineers2022

Lifetime of dielectric elastomer actuators under DC electric fields

Fabio Beco Albuquerque

Dielectric elastomer actuators (DEAs) are interesting soft actuators compared to other actuation technologies owing to large achievable actuation strains, high energy density and fast actuation. However, because DEAs need to be operated under high electric ...

EPFL2022