Publications associées à Edge strength model for glass based on the mirror zone depth

Real-time Personalized Monitoring of Neurological Disorders on Wearable Systems

The terminology of neurological disorders encompasses a range of serious illnesses (e.g., epilepsy, Alzheimer's disease) leading to morbidity, disability, and stigma. Epilepsy alone affects over 50 million people worldwide, and these figures are rising as ...

EPFL2023

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Jordi Escarre Palou, Alessandro Francesco Aldo Virtuani, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023

Formation Mechanism of Elemental Te Produced in Tellurite Glass Systems by Femtosecond Laser Irradiation

Yves Bellouard, Gözden Torun

The formation of elemental trigonal tellurium (t-Te) on tellurite glass surfaces exposed to femtosecond laser pulses is discussed. Specifically, the underlying elemental crystallization phenomenon is investigated by altering laser parameters in common tell ...

Wiley2023

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Effect of window glazing color and transmittance on human visual comfort

Marilyne Andersen, Jan Wienold, Sneha Jain

: Occupants’ visual comfort in an indoor space strongly depend on the quantity and quality of the daylight inside the space which can be altered with the type of window glazing. In this study, we compared the visual comfort perception of participants with ...

2022

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022

Explosive fragmentation of Prince Rupert's drops leads to well-defined fragment sizes

Jean-François Molinari

Anyone who has ever broken a dish or a glass knows that the resulting fragments range from roughly the size of the object all the way down to indiscernibly small pieces: typical fragment size distributions of broken brittle materials follow a power law, an ...

Nature Research2021

Flexural behaviour of post-tensioned glass beams: Experimental and analytical study of three beam typologies

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

The concept of post-tensioned glass beams builds on the concrete analogy of the reinforced glass beams. By additionally prestressing the reinforcement in a post-tensioned system, a compressive pre-stress is applied on the glass, enhancing the initial fract ...

2021

Ug-value and edge heat loss of triple glazed insulating glass units:A comparison between measured and declared values

Andreas Schueler, Anna Krammer

Triple glazed low-e coated insulating glass units with argon filling of five different suppliers on the European market with a declared thermal transmittance in the undisturbed centre of glass (Ug-value) of 0.6 W/m(2)K have been purchased from resellers an ...

ELSEVIER2021

Passive diamagnetic contactless suspension rotor with electrostatic glass motor

Hannes Bleuler, Jin Zhou, Ryosuke Kan, Yuanping Xu

In this work, we introduce a newly developed passive and frictionless diamagnetic contactless suspension rotor with electrostatic glass motor. A 20 mm diameter disc-shaped rotor comprised of pyrolytic graphite with glass is fabricated. The rotor is diamagn ...

INST ENGINEERING TECHNOLOGY-IET2019

Coatings with tailored electronic and optical properties for advanced glazing

Olivia Valérie Charlotte Bouvard

Modern envelope glazing relies on nanoscale coatings to meet a range of specific needs. Low emissivity coatings can improve the thermal performance of glazing thanks to a thin metallic film. However, the conductive nature of this layer leads to an attenuat ...

EPFL2019

Non-contact femtosecond laser-based methods for investigating glass mechanics at small scales

Christos Edouardos Athanasiou

With the progress made in miniaturizing systems over the last decades, understanding materialsâ behavior at small scales has become a necessity. In this context, glass behavior has remained largely unknown, partly for technological reasons and partly due ...

EPFL2018

Hybrid laser 3D microprocessing in glass/polymer micromechanical sensor: towards chemical sensing applications

Yves Bellouard

We demonstrate the fabrication of a 3D polymer/glass micromechanical sensor by combining two femtosecond laser direct writing processes: subtractive laser-assisted chemical etching combined with additive two-photon polymerization techniques. In the first s ...

SPIE-INT SOC OPTICAL ENGINEERING2018

Through-Glass Vias for Glass Interposers and MEMS Packaging Applications Fabricated Using Magnetic Assembly of Microscale Metal Wires

Göran Stemme, Mikhail Asiatici

A through-glass via (TGV) provides a vertical electrical connection through a glass substrate. TGVs are used in advanced packaging solutions, such as glass interposers and wafer-level packaging of microelectromechanical systems (MEMS). However, TGVs are ch ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2018

Laminated connections for structural glass components: a full-scale experimental study

Alain Nussbaumer, Pieter Christian Louter, Manuel Santarsiero

The use of glass material for structural components has drastically increased in the last decade. Among others, a laminated connection is a type of adhesive joint that makes use of foil interlayer adhesive to transfer forces between glass and metal parts. ...

Springer International Publishing Ag2017

Post-tensioned glass beams

Jagoda Cupac

Over the last few decades, the application of glass in building construction has extended from small four-side supported windowpanes to areas traditionally reserved for other materials, such as roofs, floors, staircases and full building envelopes. Glass i ...

EPFL2017

Combination of additive and subtractive laser 3D microprocessing in hybrid glass/polymer microsystems for chemical sensing applications

Yves Bellouard, Matthieu Perrenoud

We present a novel hybrid glass-polymer micromechanical sensor by combining two femtosecond laser direct writing processes: laser illumination followed by chemical etching of glass and two-photon polymerization. This incorporation of techniques demonstrate ...

Optical Society of America2017

From rock to magma and back again: The evolution of temperature and deformation mechanism in conduit margin zones

Marie Estelle Solange Violay, Michael Heap

Explosive silicic volcanism is driven by gas overpressure in systems that are inefficient at outgassing. The zone at the margin of a volcanic conduit-thought to play an important role in the outgassing of magma and therefore pore pressure changes and explo ...

Elsevier2017

On the Limits of Precision Glass Molding for Diffractive Optical Elements

Karin Prater

Diffractive optical elements (DOEs) consist of surface reliefs with dimensions in the micrometer range and nanometer precision. Two technologies dominate: Elements replicated in plastic and directly microfabricated elements in fused silica. Plastic DOEs ar ...

EPFL2017

Adhesion and interfacial healing between supramolecular hybrid networks and glass substrates

Véronique Michaud, Federica Sordo

Adhesion towards glass and interfacial healing of partially supramolecular hybrid polymer networks featuring a range of H-bdnds content were investigated through two dedicated adhesion test methods. In a first series of tests, adhesion strength was measure ...

Elsevier2017