Publications associées à Mid-span connection of a deployable tensegrity footbridge

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Environmental and Life-Cycle Cost Evaluation of a Composite Timber-UHPFRC Bridge

Eugen Brühwiler, Numa Joy Bertola

Ultra-High-Performance Fibre Reinforced Cementitious Composite (UHPFRC) has recently been used to design lightweight structures and strengthen existing ones, with more than 300 applications in Switzerland. Several composite timber-UHPFRC bridges have been ...

2023

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

Robust Analog Multisensory Array System for Lossy Capacitive Sensors Over Long Distances

Sandro Carrara, Amar Kapic, Andromachi Tsirou

A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Design of slender and squat reinforced concrete members with shear reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Marko Pejatovic

As proposed in several design standards for structural concrete, including Eurocode 2 (EN:1992-1-1:2004) and fib's Model Code 2010, the shear design of slender members with shear reinforcement can be performed by means of consistent models based on suitabl ...

ERNST & SOHN2022

Assessment of the Environmental Impacts of Bridge Designs Involving UHPFRC

Eugen Brühwiler, Numa Joy Bertola, Célia Marine Küpfer

Ultra-High-Performance Fibre-Reinforced Cementitious Composite (UHPFRC) has been developed to design lightweight structures and enhance existing designs. As the environmental footprint of the construction industry must be significantly reduced, the potenti ...

2021

Minimal mass design of active tensegrity structures

Yafeng Wang

Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yieldin ...

ELSEVIER SCI LTD2021

Fatigue examination of reinforced-concrete bridge slabs using acoustic emission and strain monitoring data

Imane Bayane

The examination of bridges under service loading is key for understanding their condition and thus for their sustainable and efficient use. The need to extend the service duration of existing bridges is increasing, and therefore, efficient tools for examin ...

EPFL2021

Fatigue Damage Factor Calibration for Long-Span Cable-Stayed Bridge Decks

Alain Nussbaumer, Cláudio Alexandre Pereira Baptista, José Joaquim Costa Branco de Oliveira Pedro

Part 2 of the Eurocode 3 (EN 1993-2) proposes a straight forward fatigue verification method using a single heavy vehicle model (FLM3) and a damage equivalent factor, lambda, to represent the fatigue damaging effects of the real traffic on road bridges. Th ...

SPRINGER NATURE SWITZERLAND AG2019

Biomimetic adaptive control of a deployable tensegrity structure

Ann Christine Sychterz

Biomimetic behavior includes aspects such as learning from previous experience, self-diagnosis, and adaptation. This thesis describes control methodologies that are essential to development towards biomimetic behavior of a complex deployable structure. Sim ...

EPFL2018

Durability and fatigue performance of a typical cold-curing structural adhesive in bridge construction

Maria Savvilotidou

The science of adhesives and adhesion for structural connections has undergone significant development during the last few decades - and successfully so in a wide variety of industries. Recent applications of structural bonding are being adopted in the con ...

EPFL2017

HTS high current cable for fusion application

Nikolay Bykovskiy

State-of-the-art magnets of fusion devices, which are based on low temperature superconductors (LTS), have almost reached their technological limits in terms of generated magnetic fields. Further progress can be made using novel high temperature supercondu ...

EPFL2017

Active control for mid-span connection of a deployable tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

Tensegrity structures are spatial self-stressed pin jointed structures where compression components (struts) are surrounded by tension elements. This paper describes a near full-scale deployable tensegrity footbridge that deploys from both sides and connec ...

2016

Deriving a load model for the braking force on road bridges: Comparison between a deterministic and a probabilistic approach

André-Gilles Dumont, Glauco Feltrin, Marc-Antoine Fénart, Katrin Beyer

The current provisions for the braking force in the Eurocodes are much more demanding than previously enforced national codes from most European countries. Hence, safety assessments of existing bridges may show a lack of compliance with the new safety requ ...

Springer International Publishing2016

Contribution to the study of the vulnerability of critical systems to Intentional Electromagnetic Interference (IEMI)

Nicolas Mora Parra

The progress of high power electromagnetic (HPEM) sources during the late 1990s raised the concern in the electromagnetic compatibility (EMC) community that they could be deployed for criminal purposes to interfere with the operation of modern electronic s ...

EPFL2016

A deployable tensegrity footbridge that connects at mid-span

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

This paper describes a near full-scale deployable tensegrity footbridge that deploys from both sides and connects at mid-span. Tensegrity structures are pre-stressed structures composed of tension elements (cables) surrounded by compression elements (strut ...

2015

Deployment of a tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

Deployable structures are structures that transform their shape from a compact state to an extended in-service position. Structures composed of tension elements that surround compression elements in equilibrium are called tensegrity structures. Tensegritie ...

Asce-Amer Soc Civil Engineers2015

Toward development of a biomimetic tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

Biomimetic structures interact with their environment, change their properties, learn and self-repair, thereby providing properties that are similar to living organisms. Interactions with the environment involve unique challenges in the field of computatio ...

International Center for Numerical Methods in Engineering (CIMNE)2014

Structural performance of complex core systems for FRP-balsa composite sandwich bridge decks

Michael Osei-Antwi

Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs ...

EPFL2014

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

Pierluigi Bruzzone, Ciro Calzolaio

The knowledge of the thermal strain distribution of the Nb3Sn filaments in a cable in conduit conductor (CICC) cross section is a key parameter in understanding the cable performance evolution when it undergoes electromagnetic (EM) cyclic loading. A CICC i ...

IEEE Institute of Electrical and Electronics Engineers2014