Publications associées à GaN grown on (111) single crystal diamond substrate by molecular beam epitaxy

Growth and Doping Mechanisms of III-V Nanostructures by Selective Area Epitaxy

Selective area epitaxy (SAE), applied to semiconductor growth, allows tailored fabrication of intricate structures at the nanoscale with enhanced properties and functionalities. In the field of nanowires (NWs), it adds scalability by enabling the fabricati ...

EPFL2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Study of growth-induced point defects and their impact on InGaN-based optoelectronic devices

Yao Chen

GaN exhibits a decomposition tendency for temperatures far below its melting point and common growth temperatures used in metal-organic vapour phase epitaxy (MOVPE).This characteristic is known to be a major obstacle for realising GaN bulk substrate. There ...

EPFL2024

Exciton migration in two-dimensional materials

Excitons play an essential role in the optical response of two-dimensional materials. These are bound states showing up in the band gaps of many-body systems and are conceived as quasiparticles formed by an electron and a hole. By performing real-time simu ...

Nature Portfolio2024

Long live(d) CsPbBr3 superlattices: colloidal atomic layer deposition for structural stability

Raffaella Buonsanti, Alexander Nicolas Chen, Philippe Benjamin Green, Victoria Lapointe

Superlattice formation afforded by metal halide perovskite nanocrystals has been a phenomenon of interest due to the high structural order induced in these self-assemblies, an order that is influenced by the surface chemistry and particle morphology of the ...

Royal Soc Chemistry2024

Surfactant behavior and limited incorporation of indium during in situ doping of GeSn grown by molecular beam epitaxy

Anna Fontcuberta i Morral, Andrea Giunto, Thomas Hagger, Louise Emma Webb

GeSn is a promising group-IV semiconductor material for on-chip Si photonics devices and high-mobility transistors. These devices require the use of doped GeSn regions, achieved preferably in situ during epitaxy. From the electronic valence point of view, ...

AMER PHYSICAL SOC2023

Ferroelectric device or structure and a method for producing ferroelectric devices or structures

Rui Ning Wang, Tobias Kippenberg, Zelin Tan

The present invention concerns a method for producing at least one ferroelectric device or structure comprising the steps of providing at least one ferroelectric material or layer, or providing at least one ferroelectric material or layer to be patterned o ...

2023

High-precision optical magnetometry using Nitrogen Vacancies in CVD diamond

Hossein Babashah

Sensing weak magnetic fields is a topic of great importance in basic science and technology due to its wide range of applications. In this context, solid-state and nanoscale quantum sensors are poised to revolutionize the sensing platforms due to their ult ...

EPFL2023

Momentum-Space Imaging of Ultra-Thin Electron Liquids in δ-Doped Silicon

Nicolò D'Anna, Gabriel Aeppli

Two-dimensional dopant layers (δ-layers) in semiconductors provide the high-mobility electron liquids (2DELs) needed for nanoscale quantum-electronic devices. Key parameters such as carrier densities, effective masses, and confinement thicknesses for 2DELs ...

WILEY2023

GeSn as next-generation material for short-wave infrared single-photon detection

Andrea Giunto

In recent years, the automotive industry has aspired to bring self-driving vehicles to the general public and light detection and ranging (LiDAR) sensors have emerged as the preferred solution for car vision systems. At present, LiDAR technologies employ e ...

EPFL2023

Murunskite - a new class of functional material

Davor Tolj

The subject of the present work is discovery and in-depth characterization of a new class of functional materials. Tuning of the bond polarity and orbital occupation with a goal of establishing balance between localization and delocalization of electrons - ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

From pulsed-DCMS and HiPIMS to microwave plasma-assisted sputtering: Their influence on the properties of diamond-like carbon films

Aïcha Hessler-Wyser, Johann Michler, David Brown, Caroline Hain, Thomas Nelis

The fabrication of high-hardness non-hydrogenated diamond-like carbon (DLC) via standard magnetron sputtering (MS) is often hindered by the low sputtering yields and ionisation rates of carbon, therefore investigations into pulsed alternatives of MS, else ...

ELSEVIER SCIENCE SA2022

GaN growth on ScAlMgO4 substrates via thermally-dewetted thin Al films

Elison de Nazareth Matioli, Alessandro Floriduz

In this note, we demonstrate the high-temperature growth of GaN on ScAlMgO4 substrates by metalorganic vapor phase epitaxy when a thin Al film is deposited ex situ on the ScAlMgO4 surface, prior to GaN growth. Mirror-like high-quality GaN epitaxial layers ...

IOP Publishing Ltd2022

Microwave plasma-assisted reactive HiPIMS of InN films: Plasma environment and material characterisation

Aïcha Hessler-Wyser, Johann Michler, Jonathan Emanuel Thomet, Caroline Hain, Thomas Nelis

This work focuses on the low temperature fabrication process of InN thin films via microwave plasma-assisted reactive high power impulse magnetron sputtering (MAR-HiPIMS). The influence of microwave plasma on the HiPIMS discharge process at various nitroge ...

ELSEVIER SCIENCE SA2022

Direct high-temperature growth of single-crystalline GaN on ScAlMgO4 substrates by metalorganic chemical vapor deposition

Elison de Nazareth Matioli, Alessandro Floriduz

In this note, we demonstrate direct high-temperature growth of single-crystalline GaN on c-plane ScAlMgO4 substrates by metalorganic chemical vapor deposition, without using low-temperature buffers. We found that a trimethylaluminium preflow was crucial to ...

IOP Publishing Ltd2022

Electrical Spectroscopy of Defect States in Synthetic 2D Materials

Yanfei Zhao

Two-dimensional (2D) materials such as graphene and transition metal dichalcogenide (TMDC) are considered as one of the most promising material platforms for future electronic devices, due to their ultra-thin thickness and fascinating electrical and optica ...

EPFL2022

Wafer-scale MoS2 with water-vapor assisted showerhead MOCVD

Andras Kis, Aleksandra Radenovic, Yanfei Zhao, Michal Daniel Macha, Mukeshchand Thakur, Jing Zhang, Mukesh Kumar Tripathi, Hyungoo Ji

Among numerous thin film synthesis methods, metalorganic chemical vapor deposition performed in a showerhead reactor is the most promising one for broad use in scalable and commercially adaptable two-dimensional material synthesis processes. Adapting the m ...

ROYAL SOC CHEMISTRY2022

New Technologies to Enhance the Figures-of-Merit of GaN Power Devices

Luca Nela

Gallium Nitride (GaN) has enabled groundbreaking developments in the field of optoelectronics and radio frequency communication. More recently, GaN devices for power conversion applications have demonstrated excellent potential. Thanks to Gallium Nitride w ...

EPFL2022

Concrete cancer : characterization of Alkali Silica Reaction early stage products by electron microscopy

Solène Anne-Lise Albinski

Concrete deterioration is a natural process, which has to be carefully monitored over a the service life of a structure. The Alkali-Silica Reaction (ASR) is a slow-process degradation, which devel-ops over decades and is therefore difficult to predict. Sin ...

EPFL2022