Publications related to Thermogravimetric analysis

Tailor-made Piezoelectric Elastomer Materials

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach, Rafal Wróbel, Thomas Mayer

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

Characterization of water sorption cycle in the cement microstructure of controlled oxide composition

Monisha Rastogi

This thesis investigates the water vapour sorption behaviour of samples with maximized calcium-silicate-hydrate (C-S-H) content. Primarily, the role of heterogeneous and homogeneous cavitation has been studied during the drying of cementitious materials. C ...

EPFL2022

A long-term study on structural changes in calcium aluminate silicate hydrates

Christian Ludwig, Barbara Lothenbach, Sonya Barzgar, Yu Yan, Mohamed Tarik

Production of blended cements in which Portland cement is combined with supplementary cementitious materials (SCM) is an effective strategy for reducing the CO2 emissions during cement manufacturing and achieving sustainable concrete production. However, t ...

SPRINGER2022

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

Cyril Cayron

Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...

SPRINGER HEIDELBERG2022

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

NIR Fluorescence lifetime macroscopic imaging with a time-gated SPAD camera

Edoardo Charbon, Claudio Bruschini, Arin Can Ülkü

The performance of SwissSPAD2 (SS2), a large scale, widefield time-gated CMOS SPAD imager developed for fluorescence lifetime imaging, has recently been described in the context of visible range and fluorescence lifetime imaging microscopy (FLIM) of dyes w ...

SPIE-INT SOC OPTICAL ENGINEERING2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

Partitioning soil organic carbon into its centennially stable and active fractions with machine-learning models based on Rock-Eval (R) thermal analysis (PARTY(SOC)v2.0 and PARTY(SOC)v2.0 (EU))

Juan Carlos Quezada Rivera

Partitioning soil organic carbon (SOC) into two kinetically different fractions that are stable or active on a century scale is key for an improved monitoring of soil health and for more accurate models of the carbon cycle. However, all existing SOC fracti ...

COPERNICUS GESELLSCHAFT MBH2021

An Experimental Setup for Heterogeneous Catalysis on Atomically Defined Metal Nanostructures

Jean-Guillaume De Groot

The main objective of this PhD thesis is to link the atomic scale structure to the catalytic properties of self-assembled nanostructures. The growth and characterization of these nanostructures was carried out in an ultra-high vacuum (UHV) chamber initiall ...

EPFL2021

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel, Lu Jiang

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Systematic investigations of uranium carbide composites oxidation from micro- to nano-scale: Application to waste disposal

Nhât-Tân Vuong

The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...

EPFL2021

Evaporation of Metals during the Thermal Treatment of Oxide Nanomaterials in Cellulose-Based Matrices

Christian Ludwig, Mohamed Tarik

Like conventional material products, waste is the last stage of the life cycle of engineered nanomaterials, which are then incinerated or stabilized before disposal. However, because of their special physical characteristics, the fate of the thermally trea ...

2020

Beam duct for the 1 MW neutral beam injector on TCV

Basil Duval, Stefano Coda, Yves Martin, Alexander Karpushov, Matthieu Toussaint, Frédéric Dolizy, Roberto Maurizio

The 1MW power of the neutral beam injector (NBI) enters the plasma of the Tokamak a Configuration Variable (TCV) through a duct. The original beam propagation model predicted a maximal heat flux on the internal faces of the duct below 350 kW/m(2), leading ...

2020

Effect of temperature on the water content of C-A-S-H in plain Portland and blended cements

Karen Scrivener, François Henri Avet

This study aims to investigate the change with temperature of the water content of the C-(A)-S-H of plain cement (PC) and Limestone Calcined Clay Cement (LC3). The water content was determined by various methods: thermogravimetric analysis (TGA), H-1-nucle ...

Pergamon-Elsevier Science Ltd2020

Tethering (Arene)Ru(II) Acylpyrazolones Decorated with Long Aliphatic Chains to Polystyrene Surfaces Provides Potent Antibacterial Plastics

Paul Joseph Dyson

The acylpyrazolone proligands HQR (HQR in general, in detail: HQCy = 1-phenyl-3-methyl-4-carbonylcyclohexyl-5-pyrazolone, 4-C(O)-phenyl, HQPh = 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone, HQC17 = 1-phenyl-3-methyl-4-stearoyl-5-pyrazolone, HQC17,Ph = 1-phenyl ...

2020

Visualizing the importance of oxide-metal phase transitions in the production of synthesis gas over Ni catalysts

Stéphane François Jean Poitel

Synthesis gas, composed of H-2 and CO, is an important fuel which serves as feedstock for industrially relevant processes, such as methanol or ammonia synthesis. The efficiency of these reactions depends on the H-2 : CO ratio, which can be controlled by a ...

2020

The effect of sodium hydroxide on Al uptake by calcium silicate hydrates (C S H)

Christian Ludwig, Barbara Lothenbach, Sonya Barzgar, Mohamed Tarik, Alessio Di Giacomo

To reduce the CO2 emissions from cement production, Portland cement (PC) is partially replaced by supplementary cementitious materials (SCM). Reactions of SCM with PC during hydration leads to the formation of CSH with more silicon and aluminum than in PC, ...

2020

Synthesis, Characterisation and Crystal structure of a New Cu(II)-carboxamide Complex and CuO nanoparticles as New Catalysts in the CuAAC reaction and Investigation of their Antibacterial activity

Kurt Schenk, Farzaneh Fadaei Tirani

The bidentate carboxamide ligand N-(thiazole-2-yl) picolinamide (LH) was synthesized in the environmentally friendly ionic liquid TBAB, and the five-coordinated Cu-II-complex, [Cu(L)(2)(H2O)]center dot CHCl3 (1) was synthesized from LH and copper(II)acetat ...

2020