Publications related to Metal-halide lamp

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

First-Principles Thermodynamics of CsSnI3

Nicola Marzari, Lorenzo Monacelli

CsSnI3 is a promising ecofriendly solution for energy harvesting technologies. It exists at room temperature in either a black perovskite polymorph or a yellow 1D double-chain, which irreversibly deteriorates in the air. In this work, we unveil the relativ ...

AMER CHEMICAL SOC2023

Kinetics of information scrambling in correlated metals: Disorder-driven transition from shock wave to Fisher or Kolmogorov-Petrovsky-Piskunov dynamics

Camille Didier Georges Aron

Quenched disorder slows down the scrambling of quantum information. Using a bottom-up approach, we formulate a kinetic theory of scrambling in a correlated metal near a superconducting transition, following the scrambling dynamics as the impurity scatterin ...

Amer Physical Soc2023

High Aspect Ratio Au Microflakes via Gap-Assisted Synthesis

Giulia Tagliabue, Fateme Kiani Shahvandi

Ultrathin and extra-large single-crystalline Au microflakes (Au MFs) have a huge potential in applications ranging from nanophotonics to catalysis. Yet, wet chemical synthesis approaches cannot access this size range due to the proportionality between grow ...

2022

Molecular dynamics simulations of the evaporation of hydrated ions from aqueous solution

Philip Robin Loche

Although important for atmospheric processes and gas-phase catalysis, very little is known about the hydration state of ions in the vapor phase. Here we study the evaporation energetics and kinetics of a chloride ion from liquid water by molecular dynamics ...

NATURE PORTFOLIO2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

Reusable support for additive manufacturing

Additive manufacturing (AM) processes such as material extrusion and vat photopolymerization all require supports to print parts with overhang features. These additional supports using the same or different materials are a waste of materials since they nee ...

2021

Exploring Perovskite-Metal Nanoassemblies for Photocatalytic Applications

Seryio Saris

The development of sustainable, renewable and economic chemical processes lies in the centre of todayâ s global energy challenge. Like in plants, artificial photosynthesis offers an auspicious solution in harvesting solar energy and storing it in chemical ...

EPFL2020

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

Electronic localization in CaVO3 films via bandwidth control

Thorsten Schmitt, Vladimir N. Strocov, Xingye Lu, Sophie Beck

Understanding and controlling the electronic structure of thin layers of quantum materials is a crucial first step towards designing heterostructures where new phases and phenomena, including the metal-insulator transition (MIT), emerge. Here, we demonstra ...

Springer2019

High-power modular LED-based illumination systems for mask-aligner lithography

Hans Peter Herzig, Johana Bernasconi, Toralf Scharf

Mask-aligner lithography is traditionally performed using mercury arc lamps with wavelengths ranging from 250 nm to 600 nm with intensity peaks at the i, g and h lines. Since mercury arc lamps present several disadvantages, it is of interest to replace the ...

2018

High power ultraviolet LED illumination systems: coherence properties and applications in photolithography

Johana Bernasconi

Mask-aligner photolithography is a technology used to replicate patterns from a mask to a photosensitive substrate. It is widely used in the fabrication of MEMS and micro-optical components, and for other applications with dimensions in the micrometer rang ...

EPFL2018

High power modular LED-based illumination system for lithography applications

Hans Peter Herzig, Marcel Groccia, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

Mask-aligner lithography is a technology used to transfer patterns with critical dimensions in the micrometer range from below 1 micron for contact printing to a dozen of microns in proximity printing. This technology is widely used in the fabrication of M ...

2018

A versatile route to homo- and hetero-bimetallic 5f–5f and 3d–5f complexes supported by a redox active ligand framework

Marinella Mazzanti, Julie Renée Michelle Andrez, Davide Toniolo

The salt-elimination reaction of the complex [Na2U(bis-salophen)] with metal halides provides an entry to the synthesis of well-defined homobimetallic uranium–uranium and rare heterobimetallic uranium–cobalt and uranium–nickel complexes supported by a redo ...

2017

Halide removal from aqueous solution by novel silver-polymeric materials

Urs von Gunten

The objective of this study was to analyze the behavior of a new material, silver-doped polymeric cloth (Ag-cloth), in the removal of bromide and iodide from waters. Silver is immobilized on the cloth, guaranteeing selective adsorption of the halide ions a ...

Elsevier2016

Determinants of disinfectant pretreatment efficacy for nitrosamine control in chloraminated drinking water

Urs von Gunten

Utilities using chloramines need strategies to mitigate nitrosamine formation to meet potential future nitrosamine regulations. The ability to reduce NDMA formation under typical post-chloramination conditions of pretreatment with ultraviolet light from a ...

Elsevier2015

Class AAA LED-Based Solar Simulator for Steady-State Measurements and Light Soaking

Christophe Ballif, Franz-Josef Haug, Matthieu Despeisse, Michael Elias Stückelberger, Yannick Samuel Riesen, Maximilien Joseph Marie Bonnet-Eymard, Brice Perruche

Recent improvements in light-emitting diode (LED) technology has allowed for the use of LEDs for solar simulators with excellent characteristics. In this paper, we present a solar simulator prototype fully based on LEDs. Our prototype has been designed spe ...

Ieee-Inst Electrical Electronics Engineers Inc2014

In situ copper–alumina composites

Andreas Mortensen, Carmen Krüger

We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...

Elsevier2013

A ratiometric fluorescence sensor for caffeine

Kay Severin, Anne-Clémence Corminboeuf, Albert Ruggi, Nicolas Luisier, Nicolas David Gaeng, Laurane Favre

The dye disodium 3,4:3’,4’-bibenzo[b]thiophene-2,2’-disulfonate can be used as molecular probe for the fluorimetric detection of caffeine in aqueous solution. The fluorescence response is attributed to non-covalent interactions of caffeine with the dye in ...

Royal Society of Chemistry2012

LTCC integrated miniature Rb discharge lamp module for stable optical pumping in miniature atomic clocks and magnetometers

Herbert Shea, Peter Ryser, Thomas Maeder, Fabrizio Vecchio, Vinu Lalgudi Venkatraman

We report here on an integrated mini-lamp module (15x26x4 mm3) with a microfabricated rf-powered Rb dielectric barrier discharge (DBD) lamp (10x10x3 mm3) positioned on top of a 0.6 mm thick (thickness adjustable) 4-layer LTCC (Low Temperature Co-fired Cera ...

IEEE2012