Publications related to Product requirements document

Preliminary Design of DEMO PF Coils Based on EU DEMO 2018 Baseline

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The dimensioning of Winding Packs and allocation of materials in DEMO PF coils is proposed based on the requirements defined by the EUROfusion 2018 DEMO baseline. The coils are pancake-wound and use two types of forced flow cable-in-conduit conductors. The ...

IEEE Institute of Electrical and Electronics Engineers2020

Linking simulation and synthesis of nickel oxide hole-selective contacts for silicon heterojunction solar cells

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Angela Nicole Fioretti, Rachel Emma Woods-Robinson

In silicon heterojunction (SHJ) solar cells, one factor limiting efficiency is "parasitic absorption" from amorphous silicon (a-Si) at the front surface. Thus, discovery of a transparent hole-selective contact to replace p-type a-Si is a promising area of ...

IEEE2020

Iterative learning control for trajectory tracking of a parallel Delta robot

Mohamed Bouri

This paper proposes an iterative learning controller (ILC) under the alignment condition for trajectory tracking of a parallel Delta robot, that performs various repetitive tasks for palletization. Motivated by the high cadence of our application that lead ...

WALTER DE GRUYTER GMBH2019

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The poloidal field (PF) coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field c ...

2019

Interface and requirements analysis on the DEMO Heating and Current Drive system using Systems Engineering methodologies

Minh Quang Tran, Hartmut Zohm

In this paper we present the methodology implemented for analyzing System Requirements and Interfaces of the Heating and Current Drive (HCD) system of the European Demonstration Fusion Power Reactor DEMO. The work consisted in updating the preliminary fram ...

2019

3-Dimensional Ultrasound Imaging for Medical Telesonography: Algorithms and Architectures

Aya Mohamed Naguib Ahmed Ibrahim

Enabling telemedicine in Ultrasound (US) imaging, i.e. telesonography, is until today just a wish. Although US has incomparable advantages such as safety in use, lower cost and complexity, and capability to be utilized in many applications, it is limited i ...

EPFL2018

Assemblies of gold nanoparticles at liquid-liquid interfaces : from liquid optics to electrocatalysis

Evgeny Smirnov

The interface between two immiscible liquids, i.e. oil and water, is an extremely attractive scaffold to self-assemble nanoparticles (NP) in arranged films. The liquid-liquid interfaces (LLIs) are defect-free and pristine by the nature, they are transparen ...

EPFL2017

Model-based optimization of distributed and renewable energy systems in buildings

François Maréchal, Paul Michael Stadler, Araz Ashouri

In order to fully exploit the potential of renewable energy resources (RERs) for building applications, opti- mal design and control of the different energy systems is a compelling challenge to address. This paper presents a two-step multi-objective optimi ...

2016

DFT-based Synchrophasor Estimation Algorithms and their Integration in Advanced Phasor Measurement Units for the Real-time Monitoring of Active Distribution Networks

Paolo Romano

The increasing penetration of Distributed Energy Resources (DERs) at the low and medium-voltage levels is determining major changes in the operational procedures of distribution networks (DNs) that are evolving from passive to active power grids. Such evol ...

EPFL2016

3D, LTCC-type, high-frequency magnetic sensors for the TCV Tokamak

Duccio Testa, Matthieu Toussaint, Gaël André Léon Farine, Thomas Maeder, Caroline Jacq, Adrien Aymeric Thibault Corne

High-frequency, 3D magnetic sensors have been designed and manufactured in-house for installation on the Tokamak a Configuration Variable (TCV). To optimize the in-vessel volume occupation, the sensors are based on combining the Low Temperature Co-fired Ce ...

Elsevier Science Sa2015

Paper-based Tabletop Application for Collaborative Chinese Character Learning

Pierre Dillenbourg, Luis Pablo Prieto Santos, Yun Wen

Although positive effects of computer technologies to improve vocabulary learning have been widely reported, most of these technologies are designed specifically for individual learning, or disregard formal classroom learning. In this paper, we present the ...

International Society of the Learning Sciences2015

IT Service Alignment Verification of Quantitative Properties in Service Design

Alain Wegmann, Gorica Tapandjieva Sekulovska

Despite many years of research, alignment of business and IT services remains a challenge. In this paper we show how to verify the quantitative properties of a service against stakeholder requirements during service design. We model the service with the Sy ...

2015

Prolonging the Hide-and-Seek Game: Optimal Trajectory Privacy for Location-Based Services

Jean-Yves Le Boudec, Jean-Pierre Hubaux, Reza Shokri, Carmela González Troncoso, Georgios Theodorakopoulos

Human mobility is highly predictable. Individuals tend to only visit a few locations with high frequency, and to move among them in a certain sequence reflecting their habits and daily routine. This predictability has to be taken into account in the design ...

2014

RFID seeking: Finding a lost tag rather than only detecting its missing

Qiang Wang, Chen Zhang, Jian Xu, Lei Xie

This paper proposes a novel type of RFID application, i.e., RFID seeking. Several existing types of RFID applications such as monitoring, searching, locating/navigating, are similar with RFID seeking. However, they are either inapplicable or vulnerable for ...

Elsevier2014

Business/IT Alignment in Practice: Lessons Learned From a Requirements Project at P&G

Gil Regev, Julien Favre, Alain Wegmann

One of the main objectives of the alignment of Business and IT in both small and large organizations is to improve the chances for an IT department to provide services that result in business success. An essential phase for this alignment is the definition ...

Springer-Verlag New York, Ms Ingrid Cunningham, 175 Fifth Ave, New York, Ny 10010 Usa2011

A hybrid hypercube - genetic algorithm approach for deploying many emergency response mobile units in an urban network

Nikolaos Geroliminis

Emergency response services are critical for modern societies. This paper presents a model and a heuristic solution for the optimal deployment of many emergency response units in an urban transportation network and an application for transit mobile repair ...

2011

Toward a Service Management Quality Model

Gil Regev, Alain Wegmann

[Context and motivation] Service Management has been steadily gaining in importance in many organizations and is becoming a major force of change in IT departments. ITIL, one of the main service management frameworks, defines the value of a service for its ...

Springer2009

GFRP posts for railway noise barriers – experimental validation of load-carrying performance and durability

Thomas Keller, Till Vallée, Florian Riebel

As part of a 15-year railway noise remediation plan, 300km of noise barriers will be installed in Switzerland over the next few years. To enable pultruded glass fiber- reinforced polymer (GFRP) materials to be used for the noise barrier posts, a specificat ...

2008

Connexions par adhérence pour les ponts mixtes acier-béton

Michel Thomann

When building new bridge structures, or widening or replacing existing bridges, the duration of on site work has a significant influence not only on the costs, but also on the potentially harmful effects (noise, pollution, traffic jam, deviation) of the co ...

EPFL2005

A Regulation-Based View on Business Process and Supporting System Flexibility

Gil Regev, Alain Wegmann

Maintaining flexible business processes is a difficult task since a business process typically satisfies the needs of several stakeholders. In this pa-per we examine organizational flexibility and business processes from the point of view of the regulation ...

2005