Publications related to Jet aircraft

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Cristian Sommariva, Umar Sheikh, Mengdi Kong, Haomin Sun

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

Search for medium effects using jets from bottom quarks in PbPb collisions at √sNN = 5.02 TeV

Matthias Finger, Konstantin Androsov, Qian Wang, Jan Steggemann, Anna Mascellani, Yiming Li, Varun Sharma, Xin Chen, Rakesh Chawla, Matteo Galli, Jian Wang, João Miguel das Neves Duarte, Tagir Aushev, Matthias Wolf, Yi Zhang, Lei Zhang, Tian Cheng, Yixing Chen, Werner Lustermann, Andromachi Tsirou, Alexis Kalogeropoulos, Andrea Rizzi, Ioannis Papadopoulos, Paolo Ronchese, Hua Zhang, Leonardo Cristella, Siyuan Wang, Tao Huang, David Vannerom, Michele Bianco, Sebastiana Gianì, Sun Hee Kim, Davide Di Croce, Kun Shi, Wei Shi, Abhisek Datta, Jian Zhao, Federica Legger, Gabriele Grosso, Ji Hyun Kim, Donghyun Kim, Zheng Wang, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Integrated modelling of neon impact on JET H-mode core plasmas

Yann Camenen, Michele Marin

Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...

IOP Publishing Ltd2023

Measurement of the top quark pole mass using t(t)over-bar+jet events in the dilepton final state in proton-proton collisions at √s=13 TeV

Matthias Finger, Konstantin Androsov, Qian Wang, Jan Steggemann, Anna Mascellani, Yiming Li, Varun Sharma, Xin Chen, Rakesh Chawla, Matteo Galli, Jian Wang, João Miguel das Neves Duarte, Tagir Aushev, Matthias Wolf, Yi Zhang, Lei Zhang, Tian Cheng, Yixing Chen, Werner Lustermann, Andromachi Tsirou, Alexis Kalogeropoulos, Andrea Rizzi, Ioannis Papadopoulos, Paolo Ronchese, Hua Zhang, Leonardo Cristella, Siyuan Wang, Tao Huang, David Vannerom, Michele Bianco, Sebastiana Gianì, Sun Hee Kim, Davide Di Croce, Kun Shi, Wei Shi, Abhisek Datta, Jian Zhao, Federica Legger, Gabriele Grosso, Ji Hyun Kim, Donghyun Kim, , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Ion temperature spectroscopic measurements in high rotation discharges by means of X-ray diagnostic at JET

Henri Weisen

Measurement of the X-ray spectra of the He-like Ni ions (Ni26+) and their dielectronic satellites (Ni25+, Ni24+, and Ni23+) plays a crucial role in determination of electronic and ion temperature of plasma in the JET device. Because n >= 3 satellites of Ni ...

2022

Plunging Circular Jets: Experimental Characterization of Dynamic Pressures Near the Stagnation Zone

Giovanni De Cesare, Pedro Filipe De Almeida Manso, Gregoire Aurelien Marie Jamet

Spillways are a requirement for dams’ safety, mainly preventing overtopping during floods. A common spillway solution involves plunging jets, which dissipate a considerable flow energy in the plunge pool. Energy dissipation has to occur in a controlled man ...

2022

Experimental studies of plasma-antenna coupling with the JET Alfven Eigenmode Active Diagnostic

Ambrogio Fasoli, Duccio Testa, Mikhail Maslov, Paulo Giovane Paschoali Pereira Puglia

This paper presents a dedicated study of plasma-antenna (PA) coupling with the Alfven Eigenmode Active Diagnostic (AEAD) in JET. Stable AEs and their resonant frequencies f, damping rates gamma < 0, and toroidal mode numbers n are measured for various PA s ...

IOP Publishing Ltd2021

Laser-induced liquid micro-jets for drug delivery

Jan Krizek

Jet injection devices have been studied and developed for transdermal drug delivery to avoid the use of needles. Such contact-less devices provide several advantages such as better dose control, lateral and depth localisation, lower collateral damage than ...

EPFL2021

Single-phase SPH modelling of plunge pool dynamic pressures at a near-prototype scale

Pedro Filipe De Almeida Manso

The turbulent plunging jet of a nearly incompressible fluid into a stagnant fluid is of great importance in many practical applications, especially for the engineering of hydropower. As an example, the dynamic load exerted by the impact of turbulent high-v ...

Taylor & Francis Ltd2021

A statistical approach for the automatic identification of the start of the chain of events leading to the disruptions at JET

Alessandro Pau

This paper reports an algorithm to automatically identify the chain of events leading to a disruption, evaluating the so-called reference warning time. This time separates the plasma current flat-top of each disrupted discharge into two parts: a non-disrup ...

IOP Publishing Ltd2021

Needle-free delivery of fluids from compact laser-based jet injector

Christophe Moser, Paul Delrot, Jan Krizek

Jet injection devices have been studied and developed for transdermal drug delivery to avoid the use of needles. Due to bulky actuation mechanisms, they are limited to body areas that are easy to reach such as skin. Here, we demonstrate a thin and long liq ...

2020

Design and development of the efficient anguilliform swimming robot- MAR

Auke Ijspeert, Peter Eckert, Anouk Looijestijn

Propulsion of swimming robots at the surface and underwater is largely dominated by rotary propellers due to high thrust, but at the cost of low efficiency. Due to their inherently high speed turning motion, sharp propeller blades and generated noise, they ...

2020

The software and hardware architecture of the real-time protection of in-vessel components in JET-ILW

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Henri Weisen, Alessandro Pau, Federico Nespoli, Cristian Sommariva, David Pfefferlé, Richard Pitts, Jonathan Marc Philippe Faustin, Yann Camenen, Hamish William Patten, Jan Horacek, Samuel Lanthaler, Javier García Hernández, Ana Francisca Leal Silva Soares, Marco Wischmeier, Pedro Camilo de Oliveira e Silva, Nicola Vianello, Mikhail Maslov, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Liang Yao, Dalziel Joseph Wilson, Bernhard Sieglin, Otto Asunta

For the first time, the JET operation in deuterium-tritium (D-T) plasma, which is scheduled to take place on JET in 2020, will be performed in the ITER mix of plasma-facing component materials. In view of the preparation of the DT campaign (DTE2), several ...

IOP Publishing Ltd2019

Beryllium melting and erosion on the upper dump plates in JET during three ITER-like wall campaigns

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Yves Martin, Jonathan Graves, Duccio Testa, Patrick Blanchard, Pierre-Thomas Paul Brun, Henri Weisen, Alessandro Pau, Federico Nespoli, Cristian Sommariva, David Pfefferlé, Richard Pitts, Jonathan Marc Philippe Faustin, Yann Camenen, Hamish William Patten, Jan Horacek, Samuel Lanthaler, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Liang Yao, Dalziel Joseph Wilson, Bernhard Sieglin, Otto Asunta

Data on erosion and melting of beryllium upper limiter tiles, so-called dump plates (DP), are presented for all three campaigns in the JET tokamak with the ITER-like wall. High-resolution images of the upper wall of JET show clear signs of flash melting on ...

IOP Publishing Ltd2019

Response of noise-amplifier flows: From linear control to nonlinear jet breakup

Isha Shukla

Among hydrodynamically unstable flows, the amplifier-flows are characterized by their large amplification potential in presence of external noise. Since amplifiers do not have an intrinsic dynamics, a chosen forcing can be applied to eventually control the ...

EPFL2019

Cavitation induction by projectile impacting on a water jet

Mohamed Farhat

The present paper focuses on the simulation of the high-velocity impact of a projectile impacting on a water-jet, causing the onset, development and collapse of cavitation. The simulation of the fluid motion is carried out using an explicit, compressible, ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Simulation of neutron emission in neutral beam injection heated plasmas with the real-time code RABBIT

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Henri Weisen, Alessandro Pau, Federico Nespoli, Cristian Sommariva, David Pfefferlé, Richard Pitts, Jonathan Marc Philippe Faustin, Yann Camenen, Hamish William Patten, Jan Horacek, Samuel Lanthaler, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Liang Yao, Dalziel Joseph Wilson, Bernhard Sieglin, Otto Asunta

In plasmas heated with deuterium beams a deficit of the expected fusion neutron rate is an indicator of the deterioration of the fast-ion confinement, caused, for instance, by magnetohydrodynamic instabilities. The capability of predicting this deficit dur ...

IOP Publishing Ltd2019

Role of JETPEAK database in validation of synthetic neutron camera diagnostics and ASCOT- AFSI fast particle and fusion product calculation chain in JET

Henri Weisen

JETPEAK is a comprehensive stationary-state database and a work environment for JET diagnostics data, processed data and simulations suitable for a wide variety of analytical tasks. It enables systematic modelling and efficient interpretation of synthetic ...

IOP PUBLISHING LTD2019

RoboScallop: A Bivalve Inspired Swimming Robot

Jamie Paik, Matthew Aaron Robertson

Underwater swimming robots permit remote access to over 70% of the Earth's surface that is covered in water for a variety of scientific, environmental, tactical, or industrial purposes. Many practical applications for robots in this setting include sensing ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

Method and apparatus for generating three-dimensional patterned soft structures and uses thereof

Christophe Moser, Paul Delrot, Sylvain Paul Hauser, Jan Krizek

A method for generating a three-dimensional patterned soft structure, including the steps of providing a soft supporting substrate, providing a drop-on-demand system with a device for varying the velocity of the jetted droplets, providing a liquid ink, jet ...

2018