Publications related to Thermal depolymerization

Biomass screening for syngas production by flash photopyrolysis

Hubert Girault, Mathieu Soutrenon, Wanderson Oliveira Da Silva

A few seconds flash photopyrolysis is used as efficient screening tool for the investigation of selected biomass in producing syngas, hydrogen and biochar. This innovative approach allowed rapid pyrolysis of the biomass, which was followed by a precise gas ...

Royal Soc Chemistry2024

New Polymers from Biomass-Derived Hydroxycinnamic Acid Derivatives

Ghezae Tekleab

Polymers play a central role in shaping our world across various fields, but their heavy reliance on petrochemicals poses climate change, environmental and health risks. To address and alleviate these issues, transitioning to sustainable polymers, sourced ...

EPFL2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Investigation of Biomass Hydrothermal Conversion Products by HRMS

Daniil Salionov

The dependency on fossil fuels and their impact on the environment is a matter of great concern for the future sustainability of modern society. The development of the "green" technologies which utilize renewable energy sources is now under investigation. ...

EPFL2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

On the role of system integration in plastic waste management

François Maréchal, Ivan Daniel Kantor, Julia Granacher

The management of plastic waste is a growing concern that can harm wildlife and ecosystems, and its end-of-life policies are key to mitigating plastic environmental impact. This work presents a decision-making methodology for the thermal and material valor ...

Elsevier2023

Recycling of Polymerase Chain Reaction (PCR) Kits

Francesco Stellacci, Yong Zhu, Weina Liu

Polymerase chain reaction (PCR) kits have been used as common diagnosing tools during the outbreak of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, with daily worldwide usage in the millions. It is well known that at the beginn ...

AMER CHEMICAL SOC2023

Renewable Energy Integration and Waste Heat Recovery for the Production of Sustainable Jet Fuel and Decarbonization of Industrial Heating Applications

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The process synthesis and optimization methods used in this work include simulation of biomass gasification, hydrogen and synthetic natural gas production, and jet fuel production via a Fisher Tropsch unit. An energy integration approach, carried out by th ...

American Institute of Chemical Engineering2023

Additive manufacturing of ceramics by two-photon lithography, volumetric 3D printing and high-resolution endo-printing

Georgia Konstantinou

Additive manufacturing is a growing sector of industrial production that allows the fabrication of parts with complex geometries and reduced waste. The context of this thesis is light-based additive manufacturing technologies. In the first part of the the ...

EPFL2022

Aldehyde-Assisted Fractionation Enhances Lignin Valorization in Endocarp Waste Biomass

Jeremy Luterbacher, Jean Thierry C Behaghel de Bueren, Florent Emmanuel Héroguel, Raymond Gérard Buser, Graham Reid Dick, Chloé Wegmann

Endocarp biomass, which forms much of the inedible portion of nuts and stone fruits, is a promising feedstock for aromatic chemical production due to its high lignin content and because it is a food industry waste. Here, we tested the nut shells and fruit ...

2020

Evaporation of Metals during the Thermal Treatment of Oxide Nanomaterials in Cellulose-Based Matrices

Christian Ludwig, Mohamed Tarik

Like conventional material products, waste is the last stage of the life cycle of engineered nanomaterials, which are then incinerated or stabilized before disposal. However, because of their special physical characteristics, the fate of the thermally trea ...

2020

Next generation cogeneration system for industry - Combined heat and fuel plant using biomass resources

François Maréchal, Adriano Viana Ensinas, Ayse Dilan Celebi

The requirement for sustainable development has prompted the researchers to explore solutions for better utilization of renewable energy resources in the future. Biomass is a promising resource and it can be converted to multiple products and services incl ...

Elsevier2019

Production and characterization of stabilized lignin

Masoud Talebi Amiri

Lignocellulosic biomass is a sustainable source of renewable carbon, and it is the most abundant form of terrestrial biomass. The three main constituents of lignocellulosic biomass are cellulose, hemicellulose, and lignin. The monomers from these biopolyme ...

EPFL2019

Topology of Pretreated Wood Fibers Using Dynamic Nuclear Polarization

David Lyndon Emsley, Jeremy Luterbacher, Arthur César Pinon, Pierrick Berruyer, Jasmine Viger-Gravel, Wu Lan, Michel Bardet

In the continuously developing field of lignocellulosic biomass, high-yield lignin depolymerization processes are sought to optimize its productivity and profitability. Recently, formaldehyde stabilization during lignin extraction and biomass pretreatment ...

2019

Establishing Lignin Structure-Upgradeability Relationships Using Quantitative 1H-13C Heteronuclear Single Quantum Coherence Nuclear Magnetic Resonance (HSQC-NMR) Spectroscopy

Jeremy Luterbacher, Masoud Talebi Amiri, Ydna Marie Questell-Santiago, Stefania Bertella

Lignin depolymerization could provide an attractive renewable aromatic feedstock for the chemical industry. Past studies have suggested that lignin structural features such as ether content are correlated to lignin’s upgradeability. An obstacle to the deve ...

2019

A combined hydrothermal gasification - solid oxide fuel cell system for sustainable production of algal biomass and energy

François Maréchal, Jan Van Herle, Christian Ludwig, Shivom Sharma, Eya Nicodeme, Hossein Madi

Hydrothermal gasification (HTG) is a promising technology that allows the recovery of nutrients from wet biomass with simultaneous production of an energy-rich gas. In this work, wastewater effluent (leachate) obtained from a composter sanitary system oper ...

2019

In situ observation of picosecond polaron self-localisation in alpha-Fe2O3 photoelectrochemical cells

Michael Graetzel, Ludmilla Steier

Hematite (alpha-Fe2O3) is the most studied artificial oxygen-evolving photo-anode and yet its efficiency limitations and their origin remain unknown. A sub-picosecond reorganisation of the hematite structure has been proposed as the mechanism which dictate ...

Springer2019

Polymer derived silicon oxycarbide ceramic monoliths: Microstructure development and associated materials properties

Demetri Psaltis, Eirini Kakkava, Nicola Casati, Giulia Panusa

Polymer derived SiOC and SiCN ceramics (PDCs) are interesting candidates for additive manufacturing techniques to develop micro sized ceramics with the highest precision. PDCs are obtained by the pyrolysis of crosslinked polymer precursors at elevated temp ...

ELSEVIER SCI LTD2018

Optimal use of biomass in large-scale energy systems: insights for energy policy

François Maréchal, Stefano Moret, Emanuela Peduzzi, Victor Codina Gironès, Marco Nasato

Biomass chemical conversion processes allow the production of solid, liquid and gaseous biofuels, which can substitute almost any kind of fossil fuel and the associated greenhouse gas emissions. Despite this potential, high investment costs and conversion ...

2017