Publications related to Global waste trade

Dataset for '3D printing of customizable transient bioelectronics and sensors'

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “3D printing of customizable transient bioelectronics and sensors”. This work aims to study and demonstrate ...

Zenodo2024

Eco-Conscious Approach to Wireless Gas Monitoring With a Hybrid Printed Passive Sensor Tag

Sandro Carrara, Johanna Zikulnig, Jürgen Kosel

Addressing the environmental impact of electronic waste in biomedical sensing, an eco-conscious approach to the realization of a Chitosan-based Acetone sensor tag for wireless gas monitoring is presented. The fabrication involves inkjet printing of silver ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, James Alec Pierce Bourely, Jaemin Kim, Xavier Aeby, Oleksandr Vorobyov

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

A Sustainable Printed Chitosan-Based Sensor for Acetone Detection

Sandro Carrara, Johanna Zikulnig

Biomedical sensing applications, including breath analysis, contribute to increasing the amount of electronic waste, as the sensors are frequently disposed, due to hygienic considerations. Consequently, the development of sustainable sensor solutions is cr ...

IEEE2023

Addressing the challenges of homogeneity, quality control and waste handling in soil bio-cementation: A large-scale experiment

Lyesse Laloui, Dimitrios Terzis, Ray Harran

In an attempt to go beyond the conventional laboratory experiments widely reported in literature around the emerging technique of soil bio-cementation, this work addresses key challenges related to its large-scale application. Precisely, a state-of-the-art ...

JAPANESE GEOTECHNICAL SOC2023

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely, Melissa Kossairi

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect ...

Zenodo2023

A customized MOF-polymer composite for rapid gold extraction from water matrices

Wendy Lee Queen, Daniel Teav Sun, Shuliang Yang, Jun Li, Li Peng, Olga Syzgantseva

With the fast-growing accumulation of electronic waste and rising demand for rare metals, it is compelling to develop technologies that can promotionally recover targeted metals, like gold, from waste, a process referred to as urban mining. Thus, there is ...

AMER ASSOC ADVANCEMENT SCIENCE2023

Surfactant-based enrichment of rare earth elements from NdFeB magnet e-waste: Optimisation of cloud formation and rare earths extraction

Christian Ludwig, Rudolf Paul Wilhelm Jozef Struis, Ajay Bhagwan Patil, Mohamed Tarik

Appropriate waste and resource management are essential for a sustainable circular economy with reduced environmental impact. With critical resources, e-waste may serve as indirect raw material. For example, with NdFeB permanent magnets, Neodymium (Nd) and ...

2023

Additively Manufactured Degradable Piezoelectric Microsystems for Sensing and Actuating

Danick Briand, Luis Guillermo Villanueva Torrijo, Nicolas Francis Fumeaux, Morgan Mc Kay Monroe

The global overabundance of electronic waste and ever-increasing concerns regarding the energy-and material-intensive manufacturing processes associated with traditional electronics are driving the development of solution-processed, degradable electronics. ...

Wiley2023

A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Ursula Röthlisberger, Sandy Sanchez Alonso, Ulf Anders Hagfeldt, Dan Ren, Hong Zhang, Linfeng Pan, Paramvir Ahlawat, Anurag Krishna, Masaud Hassan S Almalki, Viacheslav Bolnykh, Narges Yaghoobi Nia, Tzu-Sen Su

Cost management and toxic waste generation are two key issues that must be addressed before the commercialization of perovskite optoelectronic devices. We report a ground-breaking strategy for eco-friendly and cost-effective fabrication of highly efficient ...

Nature Research2022

Sustainable green processing of grape pomace for the production of value-added products: An overview

Edgard Gnansounou

In recent years, the recovery of valuable compounds from food waste like grape pomace is an emerging issue in the food sector. Grape pomace or marc can be considered as an important solid waste that is produced from the wine industries after the pressing a ...

ELSEVIER2021

Upcycling Space Structures (Preface to special issue)

Corentin Jean Dominique Fivet, Olivier Baverel

The construction industry’s contribution to the deterioration of Earth’s ecosystem is huge. 11% of all anthropic greenhouse gas emissions worldwide are due to the construction, demolition, and transformation of buildings and infrastructure. Construction an ...

2021

Techno-Economic Optimization of an Integrated Biomass Waste Gasifier–Solid Oxide Fuel Cell Plant

François Maréchal, Jan Van Herle, Jürg Alexander Schiffmann, Victoria Xu Hong He, Arata Nakajo, Maria del Mar Perez Fortes

With a growing energy demand in a carbon-constrained society, fuels cells powered by renewable fuels, and specifically solid waste, are seen as interesting contributors to the energy portfolio. The alternative energy industry needs to reduce costs, enhance ...

2021

Critical overview of biomass feedstocks as sustainable substrates for the production of polyhydroxybutyrate (PHB)

Edgard Gnansounou, Ranjna Sirohi

Polyhydroxybutyrates (PHBs) are a class of biopolymers produced by different microbial species and are biodegradable and biocompatible in nature as opposed to petrochemically derived plastics. PHBs have advanced applications in medical sector, packaging in ...

Elsevier2020

Environmental impact minimization of reticular structures made of reused and new elements through Life Cycle Assessment and Mixed-Integer Linear Programming

Corentin Jean Dominique Fivet, Gennaro Senatore, Jan Friedrich Georg Brütting, Niels De Temmerman

An important share of building environmental impacts is embodied in load-bearing structures because of their large material mass and energy-intensive fabrication process. To reduce substantially material consumption and waste caused by the construction ind ...

2020

Emerging technologies for the recovery of rare earth elements (REEs) from the end-of-life electronic wastes: a review on progress, challenges, and perspectives

Sami Rtimi

The demand for rare earth elements (REEs) has significantly increased due to their indispensable uses in integrated circuits of modern technology. However, due to the extensive use of high-tech applications in our daily life and the depletion of their prim ...

SPRINGER HEIDELBERG2020

Construction of MOF/Polymer Composites for Metal Ion Capture

Daniel Teav Sun

Metal ion capture is of environmental and economic significance. The industrial revolutions have discharged increasing amounts of heavy and precious metals into complex water sources. The key is that these types of metal ions tend to be at trace amounts in ...

EPFL2020

Rapid, Selective Extraction of Trace Amounts of Gold from Complex Water Mixtures with a Metal-Organic Framework (MOF)/Polymer Composite

Wendy Lee Queen, Emad Oveisi, Natalia Gasilova, Daniel Teav Sun, Shuliang Yang

With the ever-increasing production of electronics, there is an ensuing need for gold extraction from sources other than virgin mines. Currently, there are no technologies reported to date that can effectively and selectively concentrate ultratrace amounts ...

AMER CHEMICAL SOC2018

Low Carbon Pathways for Structural Design

Catherine Elvire L. De Wolf

To avoid an increase in greenhouse gas emissions, a depletion of resources, and waste accumulation, structural engineers have a major role to play in low carbon structural design. For example, cement- based materials represent one-third of all materials ex ...

2018