Publications related to Fault current limiter

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

The European Roadmap to Fusion Electricity (Federici et al., 2018) [1] details the path to complete within the next three decades the DEMOnstration power plant, DEMO, aiming to a net gain of Energy Q=40. The 2018 DEMO baseline considers a 2 GW tokamak devi ...

2023

Some Results of the EU Project FASTGRID

Manuel Bauer

The EU FASTGRID project aimed at improving the REBCO conductor in order to enhance its economical attractiveness for the Superconducting Fault Current Limiter (SFCL). Two approaches were simultaneously investigated: i) the reduction of the tape length thro ...

IEEE Institute of Electrical and Electronics Engineers2022

A fibre optic and machine learning based health monitoring system for superconducting power applications in modern supergrids

Arooj Akbar

The concerns for climate change and the transition to renewables is increasing the relevance of superconducting applications: High Temperature Superconductor (HTS) cables for efficient power transmission, superconducting magnets for nuclear fusion, superco ...

EPFL2022

Optical fibre based quench detection in HTS applications using machine learning classifiers

Nicolo' Riva, Arooj Akbar, Bertrand Dutoit, Bertrand Dutoit

A Mach-Zehnder Interferometer (MZI) based optical fibre sensing technique, developed and patented by EPFL, is an efficient and economical way to detect hotspots in High Temperature Superconductor (HTS) applications. Due to the MZI sensitivity being a compo ...

Elsevier2022

Long Spin Lifetime in Rare-Earth Single-Atom Magnets at Surfaces

Boris Sorokin

Further miniaturisation of magnetic storage devices requires an advent of new types of magnets, since classical ferromagnetic materials show lack of remanence at nano- and subnanoscale. A single atom can represent the smallest possible bit of information. ...

EPFL2022

Preliminary design of the pressure relief system of the EDIPO 2 helium vessel

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Evgeny Solodko

The European Dipole (EDIPO) test facility is undergoing a major upgrade of its magnet assembly, which will provide ground for testing both fusion and high-energy physics superconducting samples at variable temperature and with a background field of 15 T. I ...

2022

A design proposal for the European DEMO superconducting bus bars and current leads

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

The integration of the feeder system in a tokamak involves complex engineering, manufacturing and logistics issues. Therefore, within the pre-conceptual design activities of the European DEMO fusion reactor, it is important to provide a preliminary sizing ...

2021

Superconductors for power applications: an executable and web application to learn about resistive fault current limiters

Francesco Grilli, Nicolo' Riva, Bertrand Dutoit, Bertrand Dutoit

High-temperature superconductors (HTS) can be superconducting in liquid nitrogen (77 K) at atmospheric pressure, which holds immense promises for our future such as nuclear fusion, compact medical devices and efficient power applications. In a power system ...

2021

Fast Hotspot Detection in SFCLs by Exploiting Strain Response in Optical Fiber Sensing

Luc Thévenaz, Nicolo' Riva, Zhisheng Yang, Arooj Akbar, Bertrand Dutoit, Bertrand Dutoit

Superconducting fault current limiters (SFCLs) can be used to limit fault currents in both meshed DC and AC grids by transitioning from superconducting to resistive state, in the presence of high currents. While the device is theoretically a great way to p ...

IEEE Institute of Electrical and Electronics Engineers2021

Quench behavior of high-temperature superconductor tapes for power applications: a strategy toward resilience

Nicolo' Riva

High-Temperature Superconductors (HTS) can be superconducting in liquid nitrogen 77 K, holding immense promises for our future. They can enable disruptive technologies such as nuclear fusion, lossless power transmission, cancer treatment devices, and techn ...

EPFL2021

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Ortensia Dicuonzo

High Temperature Superconductors (HTS) are promising materials for future fusion magnets. One of HTS conductors' main issues is the quench protection: the quench develops much slower than in LTS, delaying the quench detection by voltage monitoring and caus ...

IEEE Institute of Electrical and Electronics Engineers2021

Analysis of a Novel Toroidal Configuration for Hadron Therapy Gantries

Enrico Felcini

Hadron therapy refers to a medical treatment that uses hadron beams (i.e. protons and ions) to deliver localized energy that suppresses cancerous cells, sparing the neighbouring healthy tissues from unwanted radiation. The major technical components of a h ...

EPFL2021

Local excitations in amorphous solids

Wencheng Ji

Amorphous solids are structurally disordered. They are very common and include glasses, colloids, and granular materials, but are far less understood than crystalline solids. Key aspects of these materials are controlled by the presence of excitations in w ...

EPFL2021

Optical fibre sensing for fast hotspot detection in SFCLs

Luc Thévenaz, Zhisheng Yang, Arooj Akbar, Sheng Wang, Bertrand Dutoit, Bertrand Dutoit

The health monitoring of superconducting fault current limiters (SFCL) is important for their large-scale exploitation in HVDC grids protection. The intrinsic non-homogeneity of critical current along the superconductor length can cause localized points of ...

2020

Resistivity of REBCO tapes in overcritical current regime: impact on superconducting fault current limiter modeling

Francesco Grilli, Nicolo' Riva, Bertrand Dutoit, Frédéric Sirois, Bertrand Dutoit

A detailed knowledge of the resistivity of high-temperature superconductors in the overcritical current regime is important to achieve reliable numerical simulations of applications such as superconducting fault current limiters. We have previously shown t ...

2020

Design Study of a 50-kA React-and-Wind Bi-2212 Cable for Fusion Magnet

Davide Uglietti

In the last few years, the current density of Bi-2212 wires has been greatly improved by filament densify technologies. One further step toward applications in fusion magnets is to design a high current cable, which must overcome the drawbacks of Bi-2212 w ...

IEEE Institute of Electrical and Electronics Engineers2020

Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Rainer Wesche

Quench protection is a critical issue for magnet using high-temperature superconducting (HTS) materials such as REBCO. For cable-in-conduit conductor (CICC) with twisted REBCO tapes, which is considered for high-current HTS conductor for fusion magnet, the ...

IEEE Institute of Electrical and Electronics Engineers2020

Status of the European Union Project FASTGRID

Bertrand Dutoit, Frédéric Sirois, Bertrand Dutoit, Mathias Noe

High voltage direct current super-grids are one attractive solution for the transmission of bulk power of renewable electricity over long distances. Their protection is still an issue and superconducting fault current limiters (SCFCL) offer attractive pers ...

IEEE Institute of Electrical and Electronics Engineers2019

Overcritical Current Resistivity of YBCO-Coated Conductors Through Combination of PCM and Finite-Element Analysis

Francesco Grilli, Nicolo' Riva, Bertrand Dutoit, Bertrand Dutoit

Understanding the electro-thermal behavior of high-temperature superconductor (HTS) materials is a critical aspect for designing efficient and reliable applications. In order to optimize cost and performance, one needs to understand the role played by the ...

IEEE Institute of Electrical and Electronics Engineers2019

Study of the Hot-Spot Temperature During Quench in the Nonplanar Coils of W7-X

Pierluigi Bruzzone, Kamil Sedlák

The quench protection system of the nonplanar coils of the Wendelstein 7-X stellarator was laid out over 15 years ago. At that time, the assessment of the hot-spot temperature by a basic adiabatic model was done using design values for material and operati ...

IEEE Institute of Electrical and Electronics Engineers2018